Ballycatter.nl. Industriële marktplaats - Vind leveranciers van apparatuur en services
Secure Login System PHP
Secure Login System PHP
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling
  • Customer Service
  • Partners
827 results of over 10,000 items

Bedrijfstype

Beschikbaarheid

Kwaliteitsgarantie

Staat

Transactie Type

Pumpjack C-1824D-305-240

Pumpjack Conventional Crank Balanced Pumping Units

The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency.

Buy

Currently in Use

Product

New

API

Land Freight


Inverter and Charger Combination

MultiPlus Inverter/Chargers

AMS Hydro in Vancouver

Meer informatie

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue

Buy

Made to Order

Product

New

ASME

Land Freight


Wind Turbine Charger

Rutland 1200 Terrain Windcharger

AMS Hydro in Vancouver

Meer informatie

Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature

Buy

Made to Order

New

ANSI

Sea Freight


Nitrogen Generator System

Nitrogen Unit

Introducing Sivam's Nitrogen Generator: The Ultimate Solution for Nitrogen Generation on the Go! This state-of-the-art unit utilizes PSA Column technology to generate gas phase nitrogen of specified quality levels at any field location. It's the perfect solution for industries that require a reliable source of nitrogen in remote locations, without the hassle of transporting and storing nitrogen cylinders. Sivam's Nitrogen Generator is designed with portability and convenience in mind. With its compact size and easy-to-use interface, it can be set up quickly and easily on any job site. Whether you're in the oil and gas industry, electronics manufacturing, food packaging, or any other industry that requires high-purity nitrogen, Sivam's Nitrogen Generator is the ideal choice. One of the key benefits of Sivam's Nitrogen Generator is its advanced PSA Column technology. This technology enables the unit to separate nitrogen from the air using a carbon molecular sieve, providing a reliable source of nitrogen gas at a specified purity level. This means you can be confident in the quality of the nitrogen you're generating, no matter where you are. In addition, Sivam's Nitrogen Generator is designed for efficiency and cost-effectiveness. With its low power consumption and minimal maintenance requirements, it's a cost-effective alternative to traditional nitrogen sources. And because it's a self-contained unit, there's no need to worry about transporting and storing nitrogen cylinders, saving you time and money. Overall, Sivam's Nitrogen Generator is the ultimate solution for nitrogen generation on the go. With its advanced technology, ease of use, and cost-effectiveness, it's the perfect choice for industries that require a reliable source of nitrogen gas, no matter where they are. Contact us today to learn more about Sivam's Nitrogen Generator and how it can benefit your business.

Rental

In Stock

Manufacturer

New

ISO

Land Freight


Surface Heater

Electric Heater

Introducing Sivam's Electric Heater Units: The Solution for Improved Oil Flow! Our cutting-edge technology is designed to increase the temperature of oil, resulting in reduced viscosity and improved oil flow. It's the perfect solution for industries that require consistent and efficient heating for their oil-based applications. Sivam's Electric Heater Units are built with durability and reliability in mind. Our state-of-the-art technology ensures that your oil is heated to the perfect temperature quickly and efficiently, with minimal energy consumption. This means you can enjoy the benefits of improved oil flow while also saving on energy costs. Our Electric Heater Units are specifically designed to improve the flow of your oil, regardless of its viscosity. With our units, you can maintain consistent oil temperatures throughout your system, ensuring optimal performance and efficiency. This is especially important for industries such as oil and gas, where maintaining consistent oil temperatures is critical to operations. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Electric Heater Unit. In addition to their efficiency and reliability, Sivam's Electric Heater Units are also built with safety in mind. Our units are equipped with advanced safety features to ensure that your employees and equipment are protected at all times. Overall, Sivam's Electric Heater Units are the perfect solution for industries that require improved oil flow and consistent oil temperatures. With their cutting-edge technology, reliability, and safety features, you can trust that Sivam's Electric Heater Units will exceed your expectations. Contact us today to learn more about how our Electric Heater Units can benefit your business.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Environmentally Friendly Chemicals

Green Chemicals

At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services.

Buy

In Stock

Product

New

ISO

Land Freight


Laboratory Services

Lab

Cleanstream's State-of-the-Art Laboratory Facility Offers Fast, Accurate and Environmentally-Friendly Solutions for NORM and LSA Contaminants Cleanstream is proud to announce the opening of its own laboratory facility, which offers quick and accurate identification of (NORM) sediments and deposits in and on materials and equipment. Our experts quantify and provide an environmentally-friendly solution from our product portfolio to ensure that your property is cleaned with the utmost safety and efficiency. Our laboratory services and analyses cater to all types of materials, both NORM contaminated and non-NORM contaminated. Basic Identification Our laboratory performs an analysis of metallurgy and scale deposits, including NORM / LSA samples, to identify the most effective treatment method for steel metallurgy, sediment/deposit identification, and soil characteristics. Solubility and Compatibility Analysis We perform solubility tests with our environmentally-friendly products and report on their performance. Our various eco-friendly products are readily available from our stock. Features of Cleanstream Laboratory Our laboratory is authorized to analyze NORM / LSA samples and provides screening of chemical dissolvers. We are proud of our fast turnaround time and can supply laboratory analyzes as a standard with product purchase. With Cleanstream's state-of-the-art laboratory facility, you can rest assured that your property will be treated with the most advanced and eco-friendly solutions available. Our goal is to ensure your safety while minimizing environmental impact. Trust Cleanstream for all your NORM and LSA decontamination needs!

Service

Currently in Use

Service

New

ISO

Land Freight


BMS Versol B

Versol B

Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


BMS Versol D

Versol D

Introducing BMS VerSol D: The Safer and More Environmentally Conscious Solvent Cleanstream is excited to introduce BMS VerSol D, the perfect replacement for harmful solvents such as THF, NMP/NEP, and chlorinated solvents. Our product is designed to provide a more sustainable and safer alternative for your cleaning needs. BMS VerSol D is a chemical product that is perfect for those looking for a more environmentally conscious solution to their cleaning needs. Our solvent is a green Xylene replacement that is much safer to use than traditional solvents that contain BTEX. In addition to being safer for the environment, BMS VerSol D is also highly effective in cleaning corrosion, inhibition, and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our product is also a great replacement for BTEX solvents in well cleanup operations. With BMS VerSol D, you can achieve the same cleaning performance without any of the harmful effects of traditional solvents. By choosing BMS VerSol D, you are taking a significant step towards reducing your carbon footprint and contributing to a cleaner and greener planet. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. At Cleanstream, we are committed to creating a sustainable future, and BMS VerSol D is just one of the many ways we are working towards that goal. So why wait? Make the switch to BMS VerSol D today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol D.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


BMS Versol M

Versol M

Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


BMS Versol T

Versol T

Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


BSD-40

Barium Scale Dissolver

Introducing Enviro-Syn® BSD-40™: The Solution to Your NORM Scale Dissolving and Descaling Needs Cleanstream is excited to present our high-performance NORM scale dissolver and descaler, Enviro-Syn® BSD-40™. Our product is specially designed to efficiently remove sulfate scale, with a unique ability to dissolve extremely high amounts of barium sulfate scales. We understand the challenges that come with BaSO4 scale formation, such as reduced production, bacterial growth, fouling of piping, tanks, and process equipment. These issues can greatly reduce the profitability of your operations. That's why we have created Enviro-Syn® BSD-40™, a product that can effectively remove these scales and help improve your operations' profitability. Our product is highly versatile and can be used in a variety of applications, including down-hole scaling issues, production well near wellbore damage from barite-based mud systems, heat exchangers/pipelines, on-shore/off-shore topside processing and production treatments, industrial boiler systems, geothermal well scale treatments, separators/hydrocyclones/degasser treatments, and injection well treatments. One of the significant advantages of Enviro-Syn® BSD-40™ is that it is not corrosive to metal or typical oilfield elastomers and seals. This means that you can use our product without the risk of damaging your equipment. At Cleanstream, we are committed to providing high-quality products that are safe for the environment and the people who use them. Our product is designed to meet the highest industry standards while providing exceptional performance. So why wait? Make the switch to Enviro-Syn® BSD-40™ today and experience the benefits of a highly effective NORM scale dissolver and descaler that is safe for your equipment and the environment. Contact us to learn more about how you can get started with Enviro-Syn® BSD-40™ and start improving your operations' profitability.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Enviro-Syn HCR-2000N

HCR-2000

Introducing Enviro-Syn HCR, the environmentally responsible HCl acid replacement product line that is changing the game. Say goodbye to hazardous exposure and corrosive properties without sacrificing performance. With Enviro-Syn HCR, you can use it in any situation where HCL is normally used, but without the risks and precautions, both personally and for your equipment. BMS Development - Fluid Enviro-Syn HCR2000N Modified Acid (North Sea approved/WGK-1) is the latest addition to this product line. This yellow-classified, safer alternative to 15% Hydrochloric acid is North Sea approved and can be used in a range of applications at temperatures up to 900 C. From spearhead acid to scale treatment, HCR-2000N is compatible with formation oils and fluids and requires less additives than typical 15% HCl blends. HCR-2000N is also very versatile and is supplied as a concentrate, which is typically diluted to a 20% to 90% concentration at the well site (platform) with seawater, produced or fresh water. Its comprehensive spending nature ensures that it is non-corrosive to skin tissue (OECD 404) and has low fuming and metal corrosion properties. Enviro-Syn HCR is the perfect solution for those who want to make the switch to more sustainable and environmentally-friendly practices. And with HCR-2000N, you can have peace of mind knowing that you're using a North Sea approved product that has a readily biodegradable nature in seawater (OECD 306) and can solubilize 225 kg/m3 of CaCO3. Make the switch today and experience the benefits of Enviro-Syn HCR.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


HCR-3000

HCR-3000

Introducing HCR-3000: The Safe and Effective Synthetic Acid™ Replacement At Cleanstream, we're committed to delivering high-performance oilfield solutions that are both environmentally responsible and safe for workers. That's why we're proud to introduce HCR-3000, our latest Synthetic Acid™ replacement product that delivers the same results as mineral acids but without the halogen content. HCR-3000 is a strong, non-fuming, and non-oxidizing acid alternative that can be used in a variety of oilfield applications, including scale removal, well stimulation, and acidizing. Unlike traditional mineral acids, HCR-3000 is non-corrosive to skin and safe on chrome and chrome plating, making it a safer and more reliable choice for your operations. With its comprehensive spending nature, HCR-3000 is an excellent choice for operators looking to cut down on chemical costs. Plus, its non-fuming, non-regulated formula makes it easy and safe to transport and handle, reducing the risk of accidents and exposure to hazardous chemicals. But don't let its eco-friendly and worker-safe properties fool you. HCR-3000 is a powerful acid replacement that delivers high-temperature stability of over 1800C, making it an excellent choice for high-temperature applications. And with the ability to be enhanced through the addition of conventional oilfield chemistry, HCR-3000 can be customized to meet your specific needs and requirements. Say goodbye to traditional mineral acids and hello to HCR-3000, the safer, more effective Synthetic Acid™ replacement from Cleanstream.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


HCR-6000

HCR-6000

Introducing HCR-6000, the latest addition to Cleanstream's ‘Environmentally Responsible’ modified acid product line. HCR-6000 is a powerful, low fuming Modified acid that has solubilizing abilities of 15%-25% HCI (concentrate). It's the perfect solution for minimizing the hazardous exposure levels and fuming properties of Hydrochloric acid. HCR-6000 is specifically designed to cater to the needs of the oil and gas industry, where the use of mineral acids is common practice. But unlike traditional hydrochloric acid, HCR-6000 is a clear, low-fuming acid with a low vapor pressure. This means that it poses less of a risk to human health and the environment. One of the standout features of HCR-6000 is its comprehensive spending nature. It is more than two times slower to spend than conventional HCl acid, making it an economical choice for your operations. And if that's not enough, HCR-6000 is also classed as a Class 1 acid package, making it easy to transport and handle. HCR-6000 is also highly customizable. It can be enhanced with conventional oilfield chemistry to cater to the specific needs of your operations. It offers high thermal stability, no precipitation from spent fluids, and iron stabilization effect (nano particles), making it a versatile solution for various applications such as spearhead acid, fracturing/matrix, production, injection wells, and scale treatment. HCR-6000 is also oil compatible, making it an excellent choice for your oil and gas production. Its high spent pH of over 4.5 makes it easy to dispose of, reducing plant interruptions and making it an environmentally responsible choice. At Cleanstream, we are committed to providing our customers with the best possible solutions that are both environmentally responsible and efficient. With HCR-6000, we are taking another step towards a cleaner and safer future for the oil and gas industry. Contact us today to learn more about HCR-6000 and our other ‘Environmentally Responsible’ products.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


HCR-7000

Enviro-Syn HCR-7000

Introducing HCR-7000: The Powerful, Low Fuming Modified Acid™ Solution for Your Operations As an oil and gas operator, you know the challenges of using hydrochloric acid (HCl) to dissolve downhole scale and other challenges. But what if there was a solution that could maintain the solubilizing ability and reactivity rates of HCl, while minimizing the hazardous exposure levels, corrosion rates, and negative HS&E properties? That's where HCR-7000 comes in. HCR-7000 is part of the “Environmentally Responsible” Modified Acid™ product line, designed to be a powerful, low fuming acid alternative that offers similar solubilizing abilities of 15% HCl (concentrate). The solution is also compatible with conventional oilfield chemistry, allowing for customization to meet the specific needs of your operations. One of the major benefits of HCR-7000 is its non-hazardous nature. The concentrate has undergone third-party testing and has been shown to be non-corrosive to skin tissue. This translates to ultra-low long-term corrosion effects, making it a reliable solution for your operations. The clear, ultra-low-fuming and vapor pressure properties of HCR-7000 make it a safe option for use in oil and gas operations. Its aggressive reaction rates compared to typical modified or synthetic acid systems make it an ideal solution for spearheads, stimulations, and workovers. Plus, it is compatible with typical elastomers used in oil and gas operations. HCR-7000 also offers the ability to adjust concentrations on the fly to target optimal pay zones, making it a versatile and flexible solution for your operations. With high thermal stability of up to 1900 C, there is no need to worry about precipitation from spent fluids. Choose HCR-7000, the powerful, low fuming Modified Acid™ solution for your operations. Experience the benefits of this safe, reliable, and effective solution that can help you achieve your production goals while minimizing the negative impacts on your operations and the environment. Contact us today to learn more.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Liquified Natural Gas (LNG) Transport and Supply

LNG Storage Tanks and Regassifiers

Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive.

Service

In Stock

Product & Service

New

API

Land Freight


CNG Virtual Pipeline

Compressed Natural Gas - CNG

Lovat Gas Solutions: Your Trusted Partner for CNG Virtual Pipelines At Lovat Gas Solutions, we are driven by our commitment to finding the right solutions for our customers, no matter the size or complexity of the problem. We take great pride in our ability to work closely with you to understand your unique needs and deliver the most suitable CNG (compressed natural gas) solutions available in the industry. When it comes to your CNG requirements, our experienced team is fully prepared to meet your needs. Whether you are facing a planned outage or an emergency situation, we are here to provide a quick and efficient solution. With a single phone call, you can rely on our responsive and reliable professionals to swiftly address your CNG challenges. Why choose Lovat Gas Solutions for your CNG needs? 1. Customer-Centric Approach: We prioritize working hand in hand with our customers to identify the most appropriate solution for their specific requirements. Your satisfaction is our top priority, and we go above and beyond to ensure that our services align with your expectations. 2. Comprehensive CNG Expertise: Our team is equipped with extensive knowledge and expertise in the field of CNG. We stay up-to-date with the latest industry trends and advancements, allowing us to provide you with innovative and effective solutions. 3. Responsive and Reliable Service: Time is of the essence when it comes to CNG outages or emergencies. You can count on us to promptly address your needs and provide a quick solution. Our reliable professionals are committed to minimizing downtime and ensuring the smooth operation of your business. 4. Tailored Solutions: We understand that every CNG situation is unique, and we believe in offering customized solutions. By carefully assessing your requirements, we can develop a solution that is perfectly tailored to your specific needs, ensuring optimal results. Partner with Lovat Gas Solutions today and experience the difference of working with a company that puts your needs first. Whether you are facing a planned outage or an unexpected emergency, our team is ready to provide you with responsive, reliable, and effective CNG solutions. Contact us now and let us help you overcome your CNG challenges, no matter the size or complexity. Together, we will find the perfect solution for your CNG needs.

Service

In Stock

Product & Service

New

ANSI

Land Freight


Hydrogen Solutions

Hydrogen

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Buy

In Stock

Product & Service

New

ANSI

Land Freight


Renewable Natural Gas (RNG) Virtual Pipeline

Biogas Transport

Efficient RNG Transport Solutions: Trust Lovat Gas Solutions If you have Renewable Natural Gas (RNG) that needs to be transported from Point A to Point B, Lovat Gas Solutions is here to provide you with comprehensive and efficient logistical solutions. With our expertise in RNG transport, we can devise a tailor-designed plan that perfectly suits your project's requirements, covering every aspect from compression to trucking and decompression facilities. Renewable Natural Gas (RNG) has emerged as a vital component in the transition towards sustainable energy. It offers the dual benefits of reducing greenhouse gas emissions and providing a clean, renewable source of energy. At Lovat Gas Solutions, we understand the importance of RNG and its role in creating a greener future. That's why we are dedicated to providing top-notch RNG transport services to ensure the smooth and efficient movement of RNG from its source to sales. When you partner with Lovat Gas Solutions, you can expect: 1. Tailor-Designed Logistical Plan: We recognize that each RNG transport project is unique, with its own specific requirements. Our experienced team will work closely with you to understand the details of your project and devise a logistical plan that is perfectly tailored to your needs. From compression to trucking and decompression facilities, we cover every step of the process. 2. Comprehensive Service: Our commitment to excellence extends to every aspect of RNG transport. We offer a full range of services, including compression facilities to prepare the RNG for transport, efficient trucking solutions to transport the RNG safely and reliably, and decompression facilities at the destination to ensure the gas is ready for distribution or utilization. 3. Expertise and Experience: With years of experience in the industry, our team has the knowledge and expertise required to handle RNG transport projects of all sizes. We stay up-to-date with the latest advancements in RNG technology and transportation, ensuring that we provide you with the most efficient and effective solutions available. 4. Commitment to Sustainability: At Lovat Gas Solutions, sustainability is at the core of everything we do. We understand the importance of reducing carbon emissions and creating a greener future. By providing RNG transport solutions, we contribute to the utilization of renewable energy sources and help our clients achieve their sustainability goals. When it comes to RNG transport, trust Lovat Gas Solutions to deliver exceptional service, reliability, and efficiency. Contact us today to discuss your project and let us devise a tailor-designed logistical plan that meets your specific requirements. Together, let's move towards a more sustainable future with efficient RNG transport solutions from Lovat Gas Solutions.

Service

In Stock

Product & Service

New

ANSI

Land Freight


Flare Gas Capture

Gas Recovery Equipment

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations.

Service

Made to Order

Product & Service

New

ASME

Land Freight


Stranded Gas Virtual Pipeline

Gas Processing and Transport

Maximize the Value of Your Stranded Gas with Lovat Gas Solutions Stranded gas, trapped in wells that are isolated from pipeline infrastructure, represents an untapped opportunity for producers. At Lovat Gas Solutions, we specialize in helping companies unlock the value of their stranded gas assets. If you have idle gas wells and are seeking to realize the potential value of this resource, we are here to assist you in developing a production and revenue plan. Stranded gas wells can present unique challenges, but they also hold significant potential. To extract value from these assets, a well-designed plan is essential. Our team of experts at Lovat Gas Solutions has the knowledge and experience to help you navigate this process and develop a comprehensive production and revenue plan for your stranded gas. Why choose Lovat Gas Solutions for your stranded gas needs? 1. Specialized Expertise: We understand the complexities and nuances of stranded gas projects. With our specialized expertise, we can assess the unique characteristics of your stranded wells and design a customized plan to extract and monetize the gas effectively. 2. Value Optimization: Our goal is to help you maximize the value of your stranded gas assets. By developing a production and revenue plan tailored to your specific situation, we aim to unlock the full potential of your resources and generate a significant return on investment. 3. Comprehensive Support: From the initial evaluation to the execution of the plan, Lovat Gas Solutions provides end-to-end support. Our team will collaborate closely with you, offering guidance and assistance at every stage of the process to ensure a seamless and successful outcome. 4. Sustainable Approach: We prioritize environmental sustainability in all our operations. Our plans for stranded gas production are designed to comply with regulatory standards and minimize any potential impact on the environment. We are committed to helping you extract value from your stranded gas assets while maintaining responsible and sustainable practices. Take the first step towards unlocking the value of your stranded gas assets. Contact Lovat Gas Solutions today, and let our team of experts develop a production and revenue plan that suits your specific needs. With our specialized expertise, comprehensive support, and commitment to sustainability, we are the partner you can rely on to maximize the potential of your stranded gas resources. Trust Lovat Gas Solutions to transform your idle gas assets into valuable sources of revenue.

Service

Made to Order

Product & Service

New

ANSI

Land Freight


Utility Backup Operators

Operator

Reliable Utility Backup Operators: Trust Lovat Gas Solutions When it comes to utility backup operations, Lovat Gas Solutions stands out as your trusted partner. With over 80 years of combined experience in the industry, our team possesses extensive knowledge and expertise in assisting gas utilities with pipeline outages and redesigning town border stations. We are here to provide you with highly skilled utility backup operators backed by engineers and operations support to meet your short or long-term operational needs. At Lovat Gas Solutions, we understand the criticality of having a reliable and efficient backup operation in place. Our team of utility backup operators is well-trained and equipped with the necessary expertise to seamlessly support your utility or gas operation during emergencies or planned downtime. We ensure that our operators are up to date with all safety training, enabling them to come and provide immediate assistance to your operations when required. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With our extensive experience across Canada, from north to south and east to west, we have a deep understanding of the unique challenges and requirements of utility backup operations. Our team draws upon their years of experience to deliver reliable and effective solutions tailored to your specific needs. 2. Comprehensive Support: Our utility backup operators are backed by a team of engineers and operations support, ensuring a well-rounded approach to addressing your operational manpower needs. We provide a holistic support system that covers all aspects of utility backup operations, from planning to execution. 3. Safety as a Priority: Safety is of utmost importance to us. We prioritize the well-being of our operators and your operational environment. Our utility backup operators undergo rigorous safety training to ensure compliance with industry standards and best practices. 4. Responsive Service: We understand that utility backup operations require quick response and reliable support. Our team is ready to assist you on short notice, ensuring minimal disruption to your operations during emergencies or planned outages. When you choose Lovat Gas Solutions for your utility backup operator needs, you can rest assured that you are partnering with a reliable and experienced company. We are dedicated to providing the highest level of service and support to meet your temporary operational manpower requirements. Contact a Lovat Gas Solutions expert today and let us help you with your utility backup operator needs. With our reliable team, comprehensive support, and commitment to safety, we will ensure a seamless and efficient utility backup operation for your gas utility or operation. Trust Lovat Gas Solutions to be your trusted partner in utility backup operations.

Service

In Stock

Service

Used

API

Land Freight


Field Operators

Operations Support

Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions.

Service

In Stock

Service

Used

API

Land Freight


Tailor Made Gas Solutions

Unique Gas-Related Application

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions.

Service

Made to Order

Service

New

ISO

Land Freight


Alternative Energy Solutions

Energy Transition

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives.

Service

In Stock

Service

New

ISO

Land Freight


Mobile Gas Troubleshooting

Gas Expertise

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions.

Service

In Stock

Service

New

ISO

Land Freight


Gas Supply

Natural Gas

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner.

Service

In Stock

Service

New

ANSI

Land Freight


Custom Gas Solutions

Mobile Gas Equipment

Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions.

Service

Made to Order

Service

New

ISO

Land Freight


Mobile Energy Solutions

Virtual Pipeline

Leading the Way in Mobile Energy Solutions: Cost-Effective, Clean, and Renewable Lovat Gas Solutions is proud to be at the forefront of delivering cutting-edge mobile energy solutions to a wide range of industries, including utilities, mining, oil & gas, and other industrial sectors. Our goal is simple: to provide cost-effective, clean alternative, and renewable energy solutions that meet the diverse needs of our clients. Why choose Lovat Gas Solutions for your mobile energy needs? 1. Cost-Effective Solutions: We understand the importance of cost efficiency for our clients. Our team of experts is dedicated to designing and implementing mobile energy solutions that optimize your energy consumption, reduce expenses, and enhance operational efficiency. We work closely with you to develop strategies that deliver significant cost savings without compromising on performance or reliability. 2. Clean Alternative Energy: Embracing the shift towards cleaner energy sources, Lovat Gas Solutions offers a range of clean alternative energy solutions. Whether it's through the utilization of natural gas, renewable natural gas (RNG), hydrogen, or other sustainable energy options, we help you reduce your carbon footprint and contribute to a greener future. 3. Renewable Energy Expertise: As renewable energy continues to gain momentum, our team stays at the forefront of developments and innovations in the industry. We possess the expertise and experience to integrate renewable energy sources into your mobile energy solutions, harnessing the power of solar, wind, bioenergy, and more. 4. Industry Focus: With a deep understanding of the specific needs and challenges faced by utilities, mining companies, oil & gas operators, and industrial end-users, we tailor our mobile energy solutions to suit your industry requirements. We have a proven track record of delivering exceptional results across these sectors, ensuring that our solutions are aligned with your unique operational demands. Partner with Lovat Gas Solutions to access cost-effective, clean alternative, and renewable energy solutions. We are committed to providing you with the most advanced mobile energy technologies and strategies that deliver tangible benefits to your business. Contact us today to discuss your specific mobile energy needs and let our experienced team design a customized solution that propels your operations forward. Together, let's lead the way in mobile energy solutions and drive success for your business with Lovat Gas Solutions.

Service

In Stock

Service

New

ISO

Land Freight


MS-32 Multistage Steam Turbine

Back Pressure Turbine

Introducing the Kessels MS-32 Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the dynamic world of industrial steam turbines, efficiency, reliability, and flexibility are paramount. At Kessels Steam Turbines, we understand the unique needs of the oil and gas industry, where the demand for steam is relentless. That's why we are proud to introduce our MS-32 Multistage Steam Turbine – the pinnacle of back-pressure turbine technology. The Power of Back Pressure Turbines Back pressure turbines have long been a cornerstone of industrial steam applications, and they come in both single-stage and multi-stage options. These turbines serve as the vital link between the boiler unit and the process steam header. In environments where a copious amount of steam is required, back pressure turbines shine. Straight-Back Pressure for Maximum Efficiency What sets back pressure turbines apart is their straight-back pressure nature. This design allows for the efficient utilization of exhaust steam to meet process demands. The electrical power generated during the process is consumed precisely as needed, making it an energy-efficient choice. Applications Galore Our MS-32 Multistage Steam Turbine is a versatile powerhouse, ideally suited for a wide range of applications: Drive Applications: Commonly employed in the oil and gas industry, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and many more. Power Generation Applications: Utilized to generate electricity by powering generators, offering a clean and sustainable energy solution. Bleed Back-Pressure Steam Turbines For scenarios where controlled extraction of steam within a medium pressure range is necessary, our turbines come equipped with bleed points. This feature allows for steam extraction at low volume steam demands, making it perfect for applications with high tolerance for pressure variations. Extraction Back-Pressure Steam Turbines When the process steam demand volume is substantial, and tolerance for pressure variations is minimal, our steam turbines with controlled extraction vents step up to the plate. Operating under intermediate pressure levels, they ensure a consistent and reliable steam supply. Why Choose Kessels? When you choose Kessels Steam Turbines, you're choosing more than just a product – you're choosing a legacy of excellence. With a history spanning decades, we have continuously pushed the boundaries of steam turbine technology. Our MS-32 Multistage Steam Turbine is a testament to our unwavering commitment to innovation, performance, and customer satisfaction. Unmatched Benefits of the MS-32 Multistage Steam Turbine: Energy Efficiency: Our turbines maximize the use of exhaust steam, minimizing wastage and lowering energy costs. Reliability: Built with precision and rigorously tested, the MS-32 ensures uninterrupted operations, even in demanding environments. Versatility: From drive applications to power generation, this turbine adapts to your needs with ease. Eco-Friendly: Harnessing the power of steam for electricity generation reduces carbon emissions, contributing to a greener future. Responsive Support: Our team of experts is always at your service, ready to assist with installation, maintenance, and troubleshooting. Upgrade to Excellence Today In the competitive world of the oil and gas industry, every advantage counts. Make the smart choice by upgrading to the Kessels MS-32 Multistage Steam Turbine – the epitome of efficiency, reliability, and sustainability. Contact us today to learn more about how our turbine can revolutionize your operations and propel your success into the future. Your journey to unparalleled performance starts here, with Kessels Steam Turbines.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-42 EB Multistage Steam Turbine

Back Pressure Turbine

Unleash Power and Precision with the Kessels MS-42 EB Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the high-stakes world of the oil and gas industry, precision and performance are non-negotiable. That's why, at Kessels Steam Turbines, we're proud to introduce our cutting-edge MS-42 EB Multistage Steam Turbine – a powerhouse engineered to redefine excellence in back-pressure turbine technology. Mastering Back-Pressure Turbines Back pressure turbines have been the workhorses of industrial steam applications for decades, and our MS-42 EB takes their capabilities to new heights. Whether it's single-stage or multi-stage options, these turbines serve as the critical bridge between the boiler unit and the process steam header, revolutionizing steam utilization and power generation. Efficiency Redefined Our MS-42 EB Multistage Steam Turbine boasts the hallmark of back pressure turbines: their straight-back pressure nature. This design ensures the efficient harnessing of exhaust steam, meeting process demands with unparalleled precision. Every ounce of electrical power generated is consumed as per the process steam demand, offering unmatched efficiency. Applications Beyond Boundaries At Kessels, we understand that diverse industries have unique demands. That's why our MS-42 EB Multistage Steam Turbine excels in a wide range of applications: Drive Applications: Embrace the power of our turbine in oil and gas operations, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and more. Wherever drive power is needed, Kessels delivers. Power Generation Applications: Elevate your sustainability game by using our turbine to generate electricity, powering generators with clean and efficient steam energy. Bleed Back-Pressure Steam Turbines Our commitment to versatility is evident in the design of the MS-42 EB. With built-in bleed points, uncontrolled extraction vents enable steam extraction within a medium pressure range. This feature proves invaluable in situations where bleeding steam is required at low volume steam demands and when there's a high tolerance for pressure variations. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines When your process steam demand volume is substantial, and you can't compromise on pressure variations, our steam turbines with controlled extraction vents come to the rescue. These turbines operate under intermediate pressure levels, ensuring a steady and reliable steam supply that your operations can depend on. Why Choose Kessels? Choosing Kessels Steam Turbines means choosing a legacy of excellence, innovation, and reliability. Our MS-42 EB Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization and minimize wastage with our precision-engineered turbine. Reliability Redefined: Rigorously tested and built with unwavering precision, the MS-42 EB ensures your operations run seamlessly. Unparalleled Versatility: Adapt to changing needs effortlessly, whether it's drive applications or eco-friendly power generation. Sustainability at Its Core: Harness the power of steam for electricity generation, reducing your carbon footprint and contributing to a greener future. Expert Support: Our team of specialists is always at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42 EB Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you towards a future of success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-52 Multistage Steam Turbine

Back Pressure Turbine

Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-32 Multistage Steam Turbine

Back Pressure Turbine

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-152 Multistage Steam Turbine

Back Pressure Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-201 Multistage Steam Turbine

Back Pressure Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-42 E Extraction Condensing Steam Turbine

Multistage Turbine

Experience Unmatched Efficiency with the Kessels MS-42E Extraction Condensing Steam Turbine: Your Power and Steam Solution In the fast-paced world of the oil and gas industry, precision, reliability, and efficiency are the cornerstones of success. Kessels Steam Turbines is proud to introduce the MS-42E Extraction Condensing Steam Turbine, a technological marvel designed to exceed your expectations and redefine excellence in steam turbine technology. Mastering Extraction Condensing Turbines Extraction condensing turbines are the beating heart of industries where a constant pressure steam flow is essential for various processes. The MS-42E shares constructional characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Finest What sets the MS-42E apart is its ability to inject low-pressure steam from the second admission valve chest, efficiently utilizing available plant resources to meet power demands. This makes our turbine a vital player in co-generation scenarios, where it caters to both the power and steam requirements of your process plant. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is crucial, the MS-42E shines. This turbine ensures that your power generation remains steady, providing a reliable foundation for your operations. The Ultimate in Versatility At Kessels, we understand that every industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-42E is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines is not just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-42E Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Utilize low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Built with precision and rigorously tested, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience steady power generation, regardless of variations in process steam demands, ensuring your operations run smoothly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with confidence in Kessels' expertise. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42E Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-52 EC Extraction Condensing Steam Turbine

Multistage Turbine

Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-201EC Extraction Condensing Steam Turbine

Multistage Turbine

Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-251EC Extraction Condensing Steam Turbine

Multistage Turbine

Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


ET-30 Single Stage Steam Turbine

Single Stage Turbine

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


API-611 Steam Turbine

Single Stage Turbine

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


PRV repalcement Turbine

Pressure Reducing Valve Turbine Replacement

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Oil Spill Kit - 5 Gallon Bucket

Bag Oil Spill Kit, includes: Oil-Only Absorbent Pads, Oil-Only Absorbent Pillows, Oil-Only Absorbent Socks, Disposal Bags, and Nitrile Gloves

OilHungry in Stoney Creek

Meer informatie

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Oil Only Absorbent Spill Kit - 41 Gallon

Oil Spill Kit – 41 Gallon Drum

OilHungry in Stoney Creek

Meer informatie

The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Bag Oil Spill Kit

Spill Kit, inclusive: absorbent pads, pillows, socks, disposal bags, nitrile gloves

OilHungry in Stoney Creek

Meer informatie

The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Sand Trap

Flowback Tank with Sand Separaton

Introducing Sivam's Sand Trap: The Ultimate Solution for Sand Separation in the Oil and Gas Industry! Our innovative sand separation technology is designed to improve the efficiency and performance of oil and gas operations by effectively removing sand from production streams. Sivam's Sand Trap is a game-changer in the oil and gas industry. Our cutting-edge technology works by changing the flow parameters, reducing the flow velocities to the point where the sand drops out while gas and fluids are carried through. This process involves no bags, filters, screens, and virtually no pressure drop, making it the most efficient and cost-effective solution for sand separation on the market. Our Sand Trap is designed with durability and reliability in mind. It can handle high flow rates and is built to withstand harsh conditions, ensuring optimal performance even in the most challenging environments. And with no moving parts, it requires minimal maintenance, reducing downtime and operating costs. One of the key benefits of Sivam's Sand Trap is its versatility. It can be used in a variety of applications, from primary production to enhanced recovery, and can be customized to meet the specific needs of your operation. And with its compact design, it can be easily installed and integrated into your existing system. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Sand Trap. Overall, Sivam's Sand Trap is the ultimate solution for sand separation in the oil and gas industry. With its cutting-edge technology, versatility, and efficiency, you can trust that our Sand Trap will exceed your expectations. Contact us today to learn more about how Sivam's Sand Trap can benefit your business.

Rental

In Stock

Product & Service

New

ISO

Land Freight


Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time.

Service

In Stock

Service

New

API

Land Freight


MIG/Stick 202 Welding machine

Welder

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


ROV Field Training

Dive into the Depths: Enhance Your ROV Skills with Poseidon Robotics' ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs At Poseidon Robotics, we understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in Poseidon Robotics' ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join Poseidon Robotics' ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. Dive into the depths with confidence, precision, and efficiency, guided by Poseidon Robotics' unwavering commitment to excellence in subsea robotics training.

Service

Made to Order

Service

New

ASME

Air Freight


Ambient 4-1/2 inch SSSV

Storm Choke K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Air Freight


Get Paid Faster with Dunbridge Financial

Business FX Services

Get Paid Faster with Dunbridge Financial: Empowering Your Business with Speed and Efficiency As a business owner, receiving foreign payments can sometimes be a challenging and time-consuming process. At Dunbridge Financial, we understand the importance of getting paid faster by foreign companies, and our financial service is designed to empower your business with speed and efficiency. Seamless Foreign Payment Solutions Dunbridge Financial offers a seamless platform that enables your business to receive foreign payments faster and with ease. Say goodbye to delays and hassles, and embrace a new era of streamlined international transactions. Why Choose Dunbridge Financial for Receiving Foreign Payments? 1. Speed and Efficiency Time is money, and we value both. With Dunbridge Financial, you can accelerate your payment collection process, ensuring you get paid faster by foreign companies. Our technology-driven platform and strong global banking relationships allow for quick and secure transactions, putting your funds where they need to be promptly. 2. Expert Support Navigating the complexities of international payments can be daunting, but not with Dunbridge Financial. Our team of experts is here to provide you with dedicated support and guidance, helping you navigate the world of foreign payments with confidence. 3. Transparent and Cost-Effective Transparency is at the core of our services. With Dunbridge Financial, you'll enjoy clear and competitive pricing, without any hidden fees. What you see is what you get - straightforward and cost-effective foreign payment solutions. 4. Secure and Compliant Your financial security is our top priority. Through our trusted payment service partners compliant with industry standards like ISO27001, we ensure that your funds and data are protected with the highest level of security. Join Us Today and Accelerate Your Payment Collections Don't let slow payment processing hold back your business growth. Join Dunbridge Financial today and experience the power of receiving foreign payments faster than ever before. Empower your business with speed, efficiency, and reliability. Seize the Advantage with Dunbridge Financial By choosing Dunbridge Financial, you gain a strategic advantage in the global market. Get paid faster by foreign companies, streamline your financial operations, and take your business to new heights. Experience the Difference Unlock a world of financial freedom and efficiency with Dunbridge Financial. Sign up now and embrace a seamless foreign payment experience. Get paid faster and propel your business towards greater success. The future of international transactions starts here.

Service

Made to Order

Service

New

ISO

Air Freight


Storm Choke 2-1/2 inch H

Ambient Valve

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


HDI M100 Pressure Gauge

Electronic Pressure Gauge

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Service

Tempory Sold Out

Service

New

API

Air Freight


Digital Twins

Software Development

Eleks in Toronto

Meer informatie

Empowering Energy Excellence: Harnessing Digital Twin Technology with ELEKS In the dynamic landscape of the energy sector, innovation is the catalyst for success. ELEKS stands at the forefront of this innovation wave, armed with the power of highly innovative digital twin technology. Imagine a world where you can not only visualize your assets but also simulate their behavior accurately across various scenarios, predicting and optimizing their performance. This is the realm where our engineering prowess shines, crafting software solutions that seamlessly integrate advanced digital twin technology with the prowess of IoT and machine learning. Welcome to a future where data becomes insight, insight becomes action, and your energy operations transcend the ordinary. The Power of Digital Twin Technology: Your Pathway to Excellence Asset Visualization and Simulation: ELEKS' digital twin technology allows you to visualize your assets in unprecedented detail and simulate their behavior across a spectrum of conditions. This empowers you to foresee potential challenges and optimize performance proactively. Data Integration: Our engineers craft software solutions that bring together advanced digital twin software, IoT, and machine learning capabilities. This combination enables you to capture data from various sources, creating a comprehensive and interconnected view of your energy landscape. Real-time Tracking: Track energy usage, operational conditions, and KPIs in real time. ELEKS' solutions ensure that you're not just collecting data – you're gaining actionable insights that drive informed decision-making. Predictive Analytics: Take your energy management to a new dimension by feeding your data to machine learning models. Predictive analytics become your tool for demand response (DR) management, energy optimization, and risk mitigation. Demand Response (DR) Management: With predictive insights at your fingertips, DR management becomes more efficient and targeted. Respond dynamically to fluctuations in energy demand, ensuring optimal resource allocation. Energy Management Reinvented: Leverage predictive analytics to optimize your energy management strategies. Allocate resources intelligently, reduce waste, and enhance your overall efficiency. Risk Management Made Smarter: Digital twin technology, IoT, and machine learning converge to provide you with comprehensive risk insights. Identify potential risks before they escalate, safeguarding your operations and minimizing disruptions. Elevate Your Energy Operations with ELEKS At ELEKS, we don't just create software – we empower transformation. Our energy sector technology expertise doesn't just offer solutions; it unlocks new horizons of efficiency, accuracy, and innovation. The convergence of digital twin technology, IoT, and machine learning elevates your energy landscape to a realm of unparalleled insight and foresight. Join us in shaping the future of energy, where data becomes the foundation of intelligent decisions, and innovation paves the way for success. With ELEKS, you're not just embracing technology – you're embracing transformation. Step into a world where digital twin technology becomes your compass, guiding you towards operational excellence and a sustainable energy future.

Service

Made to Order

Service

New

ISO


WR-SCSSSV 7 inch FXE

WR-SCSSSV FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Modems Leasing

Supercharge Your Business with Leased Modems from CWB National Leasing Are you ready to propel your business to new heights and boost your profits? Look no further because CWB National Leasing is your partner in success when it comes to leasing modems. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In the fast-paced world of business, time is of the essence. At CWB National Leasing, we understand that, and we've designed our process to be lightning-fast. When you apply for a modem lease, we don't keep you waiting. In fact, we pride ourselves on delivering a quick decision on your lease application. How quick, you ask? We typically notify your chosen equipment dealer that payment is on its way within just 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics and have your modem equipment delivered promptly. Check out our approval turnaround times to witness our commitment to speed and efficiency. Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you leverage it to the fullest. Instead of making a significant upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By choosing leasing, you can free up crucial cash resources that can be invested in other critical areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your modem equipment for a minor payment increase. That's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to suit your unique needs. Control Your Cash Flow Managing cash flow effectively is essential for any successful business. When you lease modems with CWB National Leasing, you gain a powerful tool to achieve this control. Our lease agreements are structured to ensure small and manageable payments throughout the term of your lease. What does this mean for you? It means that while you pay off your modem equipment, it will start generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options We understand that businesses often experience seasonal variations in revenue. At CWB National Leasing, we're all about flexibility. Our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your modem lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing modems through CWB National Leasing isn't just financially savvy; it can also offer potential tax benefits for your business. In many cases, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully grasp how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing modems with confidence. In conclusion, leasing modems with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your modem leasing needs today!

Service

In Stock

Service

New

ISO


Oil Only Absorbent Pad

Oil Only Absorbent Pad - Absorbs up to 0.3 L (0.07 gal)

OilHungry in Stoney Creek

Meer informatie

Quick Absorbent Pads stand as a reliable and efficient solution for liquid cleanup, offering a combination of rapid absorption, fine-fiber construction, oil-specific capabilities, durability, and enhanced visibility. Upgrade your cleanup processes with a product designed to keep surfaces dry and operations running. Choosing the right solution for your needs is crucial, and our Quick Absorbent Pads offer several advantages that set them apart from other options. Why should you use the absorbent pads? Absorbent pads are specifically designed for rapid absorption of leaks, spills, and overspray. The quick response time is crucial in preventing the spread of liquids and minimizing potential hazards. If time efficiency is a priority, our absorbent pads are a superior choice. Unlike some general-purpose absorbents, our pads are engineered for the selective absorption of oils and oil-based liquids. This targeted approach ensures maximum effectiveness in scenarios where oil contamination is a primary concern. If your application involves oil cleanup, our pads offer a specialized solution. The fine-fiber construction of our absorbent pads ensures a clean and residue-free surface after cleanup. This is a significant advantage over some absorbents that may leave behind liquid or fiber remnants. If you value a thorough and residue-free cleanup, our absorbent pads are the ideal choice. absorbent pads feature a durable multi-layer polypropylene fiber structure, making them tough and resistant to tearing. This robust construction ensures longevity and reliability, even in demanding industrial environments. If durability and tear resistance are priorities, our absorbent pads excel in these aspects. The oil-specific absorption feature of our pads means they do not absorb water. This specificity is crucial in scenarios where water contamination is not desired. If you require an absorbent that selectively targets oils without absorbing water, our pads provide a distinct advantage. The bright white color of our absorbent pads enhances visibility during cleanup operations. This makes it easier to monitor the saturation level and determine when replacement is needed. If visibility and ease of use are important considerations, our pads offer a practical solution. Quick Absorbent Pads are versatile and suitable for a wide range of industries and applications. Whether you're in manufacturing, automotive, or any other sector with liquid spill concerns, our pads offer a reliable and efficient solution. In short: Oil Only Absorbent Pad - Absorbs up to 0.3 L (0.07 gal), absorbs rapidly, selective absorption of oils and oil-based liquids with maximum effectiveness, No residue or fiber left behind, the absorbent pad has durable multi-layer construction, oil-selective without absorbing water, bright white color for visibility, versatility across industries. Technical Specs Part Number: OH-P811 Product Type: Absorbent Pad Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 17.5 oz Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 5.2 liter Floating: Yes UV Resistant: No Size: 8” x 11.5” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Gauge Cutter Runs

InWaTec Combined: Clearing the Path to Performance with Gauge Cutter Services In the intricate arena of subsurface control, the clarity of the pathway is paramount. At InWaTec Combined, we specialize in pre-emptive solutions that pave the way for unimpeded operations. Our Gauge Cutter running services are a critical component of this approach, ensuring that your tubing is verified for freedom from obstruction, thus setting the stage for smooth running or pulling of subsurface controls. The Imperative for a Clear Tubing A gauge cutter is an essential tool in the well servicing toolkit. Its primary role is to confirm that the tubing through which subsurface controls will be run is clear of any blockages. InWaTec Combined’s gauge cutter services provide operators with the assurance they need before commencing critical operations. This step is not just precautionary; it is a strategic move to avoid non-productive time and to ensure that all subsequent interventions are conducted efficiently and effectively. The Gauge Cutter Advantage The design of our gauge cutters is a product of extensive research and practical field experience. The bottom shape of our tools is meticulously crafted to scratch, jar, and cut away common wellbore obstructions like paraffin, sand, or other deposits from the tubing wall. This cleaning action may necessitate several runs with gauge cutters of varying sizes, a process InWaTec Combined is well-equipped to manage. Versatile Applications for Comprehensive Assurance Our gauge cutter services are versatile and comprehensive. Often used to tag the top of landing nipples, Sliding Sleeve Doors (SSDs), or to ascertain the total well depth, our tools provide operators with a multi-faceted solution. Whether it’s for routine maintenance or critical well interventions, running a gauge cutter is a step that can save time and resources in the long run. Customized to Well Specifications Understanding that each well has its unique challenges, InWaTec Combined offers gauge cutters in various sizes and configurations. This customization allows for tailored applications, ensuring that whether the obstruction is due to paraffin buildup or sand deposition, we have the right tool for the job. Commitment to Operational Continuity Choosing InWaTec Combined for your gauge cutter services means selecting a partner dedicated to your operational continuity. Our tools and techniques are designed to facilitate a clear and smooth path for your subsurface controls, minimizing the risks of unexpected interruptions and maximizing your operation's productivity. A Clear Path Forward In summary, InWaTec Combined’s Gauge Cutter running services are an indispensable part of ensuring a successful and uninterrupted operation. By removing potential obstructions and verifying well integrity, we help you maintain operational efficiency. Trust InWaTec Combined to clear the path for your well’s performance, ensuring that every operation from the surface to the subsurface is conducted with confidence and precision.

Service

In Stock

Service

New

API

Land Freight


MIG Gun M250 Series

Air Cooled MIG Welding Gun

Introducing the Revolutionary MIG Gun M250 Series: Your Ultimate Welding Companion When it comes to heavy-duty, durable, and high-performance MIG guns, look no further than the Canaweld M250 Series. Crafted with precision and innovation, this newly designed MIG gun sets a new standard in the welding industry. Engineered to meet the demands of the oil and gas industry, the M250 Series will transform the way you weld, offering unmatched versatility, comfort, and efficiency. Built for Excellence - Unleash the Power of Adaptability The M250 MIG gun boasts a unique and cutting-edge feature that sets it apart from the rest - the ability to convert termination styles seamlessly. With a simple replacement, you can switch between Euro style, Lincoln® style, Tweco® style, or Miller® style, ensuring compatibility with various welding machines. This adaptability makes the M250 Series a true game-changer for welders, offering unmatched flexibility in their welding projects. Unrivaled Features - Mastering Welding Precision Let's dive into the exceptional features of the Canaweld M250 Series: 1. Knuckle Joint: Experience improved balance and position-ability as the handle and neck move independently of the cable assembly. Weld with greater precision and control. 2. Durable Cable: The M250 MIG gun boasts excellent heat, abrasion resistance, and flexibility in its cable. It's lighter than standard cable sets and can withstand over 1 million flexes in life testing, ensuring it stands the test of time. 3. Premium Contact Tips: Crafted from premium grade copper alloys, the contact tips are extremely durable, offering superior performance and efficiency. 4. High-Quality Accessories: Choose from a range of durable and high-performance options for tip adaptors, diffusers, and swan necks, tailoring your MIG gun to suit your specific needs. 5. Ergonomic Handle Design: Enjoy comfortable handling with the ergonomic design of the handle, reducing welder fatigue and promoting longer welding sessions. 6. Air Gap Technology: The M250 MIG gun utilizes air gap technology for cooler running handles and better heat transfer isolator from the swan neck, ensuring efficient and effective welding. 7. Versatile Liner: The steel and combo liner cater to all types of wires, including steel (metalcore and flux-cored), stainless steel (metalcore and flux-cored), and aluminum, making it suitable for a wide range of welding applications. 8. Effective Sealing: The unique sealing ring ensures effective sealing of impurities, particularly in the argon gas process, promoting cleaner welds. 9. Push-on Nozzle System: Easily adjust nozzle stick-out with the push-on nozzle system, streamlining your welding workflow. 10. High-Quality Trigger: The M250 MIG gun comes with a high-quality trigger that boasts a life expectancy of over 1 million cycles, offering durability and reliability in every weld. Elevate Your Welding Experience with Canaweld M250 Series At Canaweld, we strive to empower welders with the latest advancements in welding technology. The M250 Series is a testament to our commitment to excellence, providing welders with a powerful, versatile, and comfortable welding solution. Experience the future of welding with the Canaweld M250 Series - Your Ultimate Welding Companion!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Renewable Natural Gas (RNG) Virtual Pipeline

Biogas Transport

Efficient RNG Transport Solutions: Trust Lovat Gas Solutions If you have Renewable Natural Gas (RNG) that needs to be transported from Point A to Point B, Lovat Gas Solutions is here to provide you with comprehensive and efficient logistical solutions. With our expertise in RNG transport, we can devise a tailor-designed plan that perfectly suits your project's requirements, covering every aspect from compression to trucking and decompression facilities. Renewable Natural Gas (RNG) has emerged as a vital component in the transition towards sustainable energy. It offers the dual benefits of reducing greenhouse gas emissions and providing a clean, renewable source of energy. At Lovat Gas Solutions, we understand the importance of RNG and its role in creating a greener future. That's why we are dedicated to providing top-notch RNG transport services to ensure the smooth and efficient movement of RNG from its source to sales. When you partner with Lovat Gas Solutions, you can expect: 1. Tailor-Designed Logistical Plan: We recognize that each RNG transport project is unique, with its own specific requirements. Our experienced team will work closely with you to understand the details of your project and devise a logistical plan that is perfectly tailored to your needs. From compression to trucking and decompression facilities, we cover every step of the process. 2. Comprehensive Service: Our commitment to excellence extends to every aspect of RNG transport. We offer a full range of services, including compression facilities to prepare the RNG for transport, efficient trucking solutions to transport the RNG safely and reliably, and decompression facilities at the destination to ensure the gas is ready for distribution or utilization. 3. Expertise and Experience: With years of experience in the industry, our team has the knowledge and expertise required to handle RNG transport projects of all sizes. We stay up-to-date with the latest advancements in RNG technology and transportation, ensuring that we provide you with the most efficient and effective solutions available. 4. Commitment to Sustainability: At Lovat Gas Solutions, sustainability is at the core of everything we do. We understand the importance of reducing carbon emissions and creating a greener future. By providing RNG transport solutions, we contribute to the utilization of renewable energy sources and help our clients achieve their sustainability goals. When it comes to RNG transport, trust Lovat Gas Solutions to deliver exceptional service, reliability, and efficiency. Contact us today to discuss your project and let us devise a tailor-designed logistical plan that meets your specific requirements. Together, let's move towards a more sustainable future with efficient RNG transport solutions from Lovat Gas Solutions.

Service

In Stock

Product & Service

New

ANSI

Land Freight


Coiled Tubing Mechanical Dimple Tool

MDT, Mechanical Dimple Tool

Introducing the MDT Mechanical Dimple Tool from Marlin Oil Tools: Your Essential Companion for Coil Tubing Connector Installation Marlin Oil Tools is proud to present the MDT Mechanical Dimple Tool, a specialized hand tool designed to significantly simplify the process of attaching dimple connectors to the end of coil tubing. This tool is an indispensable asset for oil and gas field operations, ensuring a secure and efficient setup of coil tubing connectors, even when dealing with connectors that have a larger diameter than the coil tubing itself. Key Features of the MDT Mechanical Dimple Tool: Reliable and Robust Design: Engineered for durability and reliability, the MDT Mechanical Dimple Tool is built to withstand the demanding conditions of oil and gas operations. Versatile Connector Compatibility: Thanks to its innovative two-half construction, the MDT allows for the mounting of dimple connectors of various sizes, providing unparalleled flexibility in connector installation. Ease of Use: Designed as a hand tool, the MDT Mechanical Dimple Tool is user-friendly and requires no specialized training for operation, making it ideal for quick and efficient use in the field. Adaptable to Coil Tubing Variations: Capable of accommodating connectors with diameters larger than that of the coil tubing, ensuring a versatile and practical solution for a wide range of coil tubing setups. Streamlined Operation: Optimizes the process of rigging up dimple connectors, significantly reducing setup time and enhancing overall operational efficiency. Field-Ready Solution: Compact and portable, the MDT is designed to be easily transported and used in various field locations, ensuring that your operations can proceed smoothly and without interruption. Maximize your coil tubing operations with the MDT Mechanical Dimple Tool from Marlin Oil Tools, a leading-edge solution designed for the efficient attachment of dimple connectors in the oil and gas industry. With its reliable design and innovative two-half construction, the MDT offers unparalleled versatility and ease of use, making it a must-have tool for securing connectors to coil tubing, regardless of diameter discrepancies. Whether you're in the field or on the rig, the MDT Mechanical Dimple Tool ensures a quick, secure, and efficient connector setup, enhancing your operational flexibility and productivity. Choose the MDT for a dependable, user-friendly solution to your coil tubing connector installation needs. Why Choose the MDT Mechanical Dimple Tool from Marlin Oil Tools? Enhanced Connector Installation Efficiency: Provides a quick and secure method for attaching dimple connectors, streamlining your operations. Superior Design for Field Operations: Built with durability and versatility in mind, ensuring reliable performance under diverse conditions. User-Friendly Operation: Designed for ease of use, enabling efficient field application without the need for extensive training. Flexible and Versatile: Adapts to a wide range of connector sizes, overcoming challenges related to coil tubing diameter variations. The MDT Mechanical Dimple Tool by Marlin Oil Tools represents the cutting edge in coil tubing equipment, offering a practical, efficient, and reliable solution for enhancing your well intervention and maintenance operations. Incorporate the MDT into your toolkit for a smoother, more efficient coil tubing connector installation process.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Pressure and Temperature Memory Gauge Service

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust.

Service

In Stock

Service

New

API

Land Freight


Plug Chokes for Tubing

Downhole Tools

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Scaffolding Leasing

Enhance Your Construction Projects with Scaffolding Leasing from CWB National Leasing Boost Efficiency and Financial Agility in Your Construction Business In the construction industry, scaffolding is a vital component for ensuring safety and accessibility. Opting to lease scaffolding equipment through Canadian Western Bank (CWB) National Leasing provides a flexible and economically advantageous solution for your construction needs. Here’s how leasing scaffolding can elevate your construction operations: 1. Quick Equipment Accessibility CWB National Leasing prioritizes efficiency in its leasing process. With a commitment to fast decisions, typically within 48 hours of your application, you can expect rapid notification to your equipment dealer regarding payment. This speedy process means your scaffolding equipment can be on-site and ready for use promptly, keeping your construction projects on schedule. 2. Enhanced Purchasing Power Leasing scaffolding with CWB National Leasing allows you to leverage your financial resources more effectively. By choosing periodic payments over a lump-sum purchase, you free up capital for other essential aspects of your business. Additionally, you have the option to upgrade your scaffolding with extra features or accessories for a minimal increase in payments. 3. Balanced Cash Flow Management The lease structure offers smaller payments over the term, enabling your scaffolding to start contributing to your project's efficiency while it’s being paid off. This approach is key to maintaining a healthy balance between your expenses and revenue. 4. Flexible Payment Plans Understanding the unique financial needs of construction businesses, CWB National Leasing provides various payment options, including seasonal, semi-annual, or annual plans. This flexibility ensures that your payments align with your business’s revenue cycle, accommodating the seasonal nature of many construction projects. 5. Potential Tax Benefits Leasing scaffolding can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to understand how leasing can positively affect your business’s tax position. Conclusion Choosing to lease scaffolding equipment through CWB National Leasing is a strategic decision that empowers your construction business with the necessary tools while maintaining financial flexibility. It enables you to have access to essential scaffolding for your projects without the financial burden of a large upfront investment, paving the way for enhanced safety, efficiency, and profitability in your construction endeavors.

Service

In Stock

Service

New

ISO


Check Set Tool for Slickline

Downhole Tools

Secure and Optimize Your Downhole Operations with HOCA Oil Tools' Check Set Tool In the intricate world of oil and gas exploration and extraction, securing and optimizing downhole components are pivotal for operational success and safety. HOCA Oil Tools, a leader in downhole slick line tool solutions, presents the Check Set Tool, an innovative product designed to ensure the correct setting and functionality of downhole locks and plugs. This specialized tool is an essential part of maintaining well integrity and efficiency, demonstrating our commitment to providing high-quality, reliable downhole solutions. HOCA’s Check Set Tool: Ensuring Downhole Safety and Efficiency The Check Set Tool by HOCA Oil Tools is engineered with precision, built to verify the accurate setting of lock mandrels and other downhole locking devices. Crafted from robust materials suited for the harsh downhole environment, this tool is designed for reliability and durability, ensuring that your downhole operations run smoothly and securely. Elevate Your Downhole Tool Setting with HOCA Oil Tools At HOCA Oil Tools, we understand the challenges and risks associated with downhole operations. Our Check Set Tool is a reflection of our dedication to innovation, quality, and customer service, offering a solution that addresses the critical need for secure and efficient downhole tool settings. Integrating the HOCA Check Set Tool into your downhole operations not only enhances operational security and efficiency but also demonstrates a commitment to the highest standards of well integrity and safety. Our experienced team is dedicated to supporting your operational success, providing tools and solutions that meet the demanding conditions of the oil and gas industry. Invest in the HOCA Check Set Tool and experience the confidence and efficiency that come with knowing your downhole components are correctly set and secured. Choose HOCA Oil Tools for all your downhole needs and join the ranks of satisfied customers who trust our products to keep their operations running smoothly and safely.

Buy

In Stock

Product & Service

New

API

Air Freight


Partnered with Wandera

Cybersecurity

ALCiT in Mississauga

Meer informatie

Empower Your Mobile Security with ALCiT's Wandera Partnership In today's digital landscape, where threats are omnipresent, your mobile devices stand as gateways to your digital world. With 87% of successful mobile phishing attacks originating outside of emails, and 57% of organizations having fallen victim to mobile phishing incidents, the need for fortified mobile threat defense is undeniable. That's where ALCiT's partnership with Wandera steps in. Wandera: Your Guardian in Mobile Security Amidst the ever-evolving threat landscape, Wandera emerges as a beacon of mobile security. With cutting-edge intelligence at its core, Wandera's threat defense stands as a formidable fortress against threats targeting your mobile devices. ALCiT proudly joins forces with Wandera to ensure your mobile landscape is fortified and resilient. Wandera's Armor: Unveiled Phishing Protection: 87% of successful mobile phishing attacks occur beyond emails, but with Wandera, you're secured. Experience comprehensive protection against phishing attempts that threaten your mobile domain. Malware Defense: Mobile malware knows no bounds, but neither does Wandera's prowess. Shield your devices from mobile malware, safeguarding your digital space. Cost Control and Reduction: Wandera isn't just a security guardian; it's a cost-effective ally. Control and reduce costs across your mobile fleet, ensuring both security and efficiency. Preserve Your Reputation: In today's digital age, reputation is paramount. Wandera shields your company's reputation by preventing mobile threats that could compromise your integrity. Unlock a Secure Mobile Future With ALCiT's partnership with Wandera, the power to safeguard your mobile realm is within your grasp. Embrace the future of mobile security – one that's fortified, intelligent, and responsive to threats. Secure Your Mobile Domain Today ALCiT's partnership with Wandera isn't just a collaboration; it's your shield against mobile threats.

Service

Made to Order

Service

New

ISO


Wax Knife

Downhole Tools

Experience Unmatched Efficiency in Wellbore Cleaning with HOCA Oil Tools' Wax Knife In the highly specialized field of downhole operations, the quest for efficiency, precision, and reliability is ongoing. At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that not only meet but exceed these demands. A shining example of our commitment to innovation and quality is our Wax Knife, a pivotal tool designed for effective wellbore cleaning, particularly in the removal of paraffin buildup. HOCA’s Wax Knife: Tailored for Optimal Wellbore Maintenance The HOCA Wax Knife is expertly engineered to address the common yet critical issue of wax accumulation within wellbores. Crafted from premium materials and designed with precision, our Wax Knife ensures the thorough and efficient removal of wax, thereby maintaining optimal well performance. Ideal for a range of well conditions and compatible with various slick line diameters, the HOCA Wax Knife is a versatile tool essential for maintaining well integrity and flow. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with innovative and reliable downhole solutions. Our Wax Knife exemplifies this dedication, offering a blend of efficiency, effectiveness, and durability that is unmatched in wellbore maintenance. Integrating the HOCA Wax Knife into your downhole maintenance regimen is not just an investment in a tool but an investment in the continued productivity and safety of your operations. Our commitment to excellence ensures that each Wax Knife we deliver meets the rigorous demands of downhole environments and helps our clients achieve their operational objectives with greater ease and efficiency. Discover the difference that a HOCA Wax Knife can make in your downhole maintenance operations. Choose HOCA Oil Tools for your wellbore cleaning needs and experience the highest standards of quality, efficiency, and customer service in the industry. Step up your well maintenance game with HOCA Oil Tools’ Wax Knife – the key to maintaining optimal well performance and operational safety. Contact us today to learn more about how our downhole solutions can revolutionize your operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Distibuted Control System (DCS) Fiber Ring Upgrades

Elevating Control, Enhancing Connectivity: Distributed Control System (DCS) Fiber Ring Upgrades by Nulux Network Solutions In the dynamic panorama of the oil and gas industry, where precision, control, and uninterrupted communication play a pivotal role in sustaining optimal operational efficacy, Nulux Network Solutions emerges as a beacon of technological innovation and steadfast reliability. With our rich spectrum of products, solutions, and services encapsulating the entire energy value chain, we endeavor to escort our clients towards a future that is not only technologically advanced but also imbibes the essence of sustainability. Unraveling the Intricacies of DCS in Oil & Gas Operations The Distributed Control System (DCS) sits at the nexus of modern industrial processes in the oil and gas sector, ensuring streamlined control, enhanced safety, and optimized operational efficiency through robust and seamless communication. The very pulse of myriad operations, stretching from exploration, extraction, refining to distribution, is synchronized through a well-knit web of data and control signals that circulate through the DCS. Nulux’s DCS Fiber Ring Upgrades: Synchronizing Future with Present As technological paradigms shift, the intrinsic need to elevate the existing infrastructural capabilities becomes imminent. Nulux’s DCS Fiber Ring Upgrades service converges the realms of technological advancements with your existing control systems, ushering your operations into an era where communication is not just seamless but also expansively scalable and inherently secure. Enhanced Data Transmission: Our DCS Fiber Ring Upgrades accentuate your data transmission capabilities, ensuring real-time communication, control, and data accessibility across the entire operational landscape. Fortified Security: In an industry where data integrity is paramount, our fiber ring upgrades bolster the security framework, safeguarding your operational data against potential cyber vulnerabilities. Uninterrupted Operations: Mitigate downtimes and enhance operational continuity with a robust, reliable, and redundantly configured fiber communication network, ensuring that your control systems are always in cohesive synchronization. Scalability for Future: Navigate future expansions and integrations effortlessly with a DCS fiber infrastructure that is inherently designed to accommodate scalability, ensuring your operations are always in tandem with technological advancements. Envisioning a Sustainable Future with Nulux Our commitment at Nulux Network Solutions transcends beyond providing state-of-the-art technological solutions. We are ardently dedicated to propelling our clients on a journey towards a more sustainable future, where every operational stride is in harmony with environmental and societal well-being. Collaborative Journey Towards Excellence Nulux’s DCS Fiber Ring Upgrades is not just a service; it’s a partnership, where we walk hand in hand with our clients in their operational journey, ensuring every technological stride is secure, robust, and resonates with their overarching objectives. Wrapping Up In the fast-paced, ever-evolving domain of the oil and gas industry, let Nulux Network Solutions be your technological ally, ensuring your DCS is not just a control system but a futuristic, secure, and sustainable communication hub that seamlessly synchronizes every operational pulse. Embark on a journey where control, communication, and sustainability coalesce into operational excellence with Nulux Network Solutions. Let's forge ahead, crafting a future where technology and sustainability resonate in unison, ensuring every operational stride is a step towards a more connected, controlled, and sustainable tomorrow. Together, let's weave a network where every data byte accelerates us towards a future sculpted with precision, control, and conscientiousness.

Service

In Stock

Service

New

ISO


Bottomhole Pressure Instrument Hangers Accessories

Downhole Tools

Optimize Downhole Operations with HOCA Oil Tools' BHP Tool Accessories In the ever-evolving oil and gas industry, precision, reliability, and efficiency are paramount. At HOCA Oil Tools, we understand the critical nature of accurate downhole data collection and the tools required to achieve this. Our BHP (Bottom Hole Pressure) Tool Accessories are designed to complement and enhance the performance of downhole pressure measurement tools, ensuring that operators can obtain the most accurate and reliable data possible. HOCA’s BHP Tool Accessories: Enhancing Downhole Data Collection Our BHP Tool Accessories range from specialized adaptors and seals to shock absorbers and carriers, all engineered to ensure that your downhole pressure measurement tools operate at peak efficiency. These accessories are crucial for protecting sensitive instruments, ensuring proper tool placement, and enhancing data transmission from the downhole environment to the surface. Manufactured with the highest quality materials and designed to meet rigorous industry standards, HOCA’s BHP Tool Accessories are the solution to optimizing your downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ BHP Tool Accessories means opting for quality, reliability, and performance. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether you’re measuring downhole pressures, temperatures, or other critical parameters, our accessories provide the support needed to ensure successful data collection. Integrating our BHP Tool Accessories into your downhole toolkit signifies a step toward enhanced operational success and efficiency. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with innovative solutions and expert service. Select HOCA Oil Tools for your BHP Tool Accessories and transform the efficiency and accuracy of your downhole operations. Partner with us, and unlock the full potential of your downhole data collection with tools and accessories designed for success. With HOCA Oil Tools, you’re not just investing in products; you’re investing in the future of your downhole operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Casing Patch Stackable System - STX-SPAN

Stackable Casing Patch

Introducing the new multi-trip stackable STX-SPAN version from ID OILTOOLS! This cutting-edge system is the perfect solution for isolating longer intervals in flowing or static wells. With the ability to be deployed on wire line, slick line, coil tubing or conventional tubing, the STX-SPAN is versatile and can be used in a variety of applications. The STX-SPAN is also ideal for wells with limited rig up height and on wells that have severe dog legs where only short sections will pass. Each section seals to the previous one via a ratchet latch stinger and seal bore receptacle, making it easy to use and efficient. Our stackable X-SPAN products allow for long straddle systems to be deployed in multiple runs, making it perfect for when lubricator length or well accessibility is an issue. With the ability to isolate the top and bottom of the intended zone using X-SPAN or GTX-SPAN elements, this technology allows for extremely long isolation systems to be deployed. Additionally, specially engineered seal assemblies are utilized between each sequential intermediate section for added reliability. The STX-SPAN can incorporate standard off-the-shelf customer supplied tubulars as straddle base pipe material, and can incorporate sand screens, slotted liner, flow control devices such as profile nipples and sliding sleeves. It is also rated for high pressure and high temperature applications, making it perfect for a variety of environments. So, if you're looking for a versatile, reliable, and easy-to-use system for isolating longer intervals in your wells, look no further than the STX-SPAN from ID OILTOOLS! Contact our Tech Services department for assistance and more information on this game-changing product.

Buy

In Stock

Product & Service

New

API

Sea Freight


Check Valves

Downhole Tools

Maximize Well Integrity and Safety with HOCA Oil Tools' BHP Tool Accessories In the complex and demanding realm of oil and gas extraction, ensuring well integrity and optimizing production are paramount. HOCA Oil Tools rises to this challenge with our premium BHP (Bottom Hole Pressure) Tool Accessories, specifically designed to enhance the performance and reliability of downhole pressure monitoring systems. These accessories, vital for the precise measurement and control of well conditions, are engineered to complement our BHP tools, facilitating accurate data acquisition and ensuring well safety. HOCA’s BHP Tool Accessories: Elevating Downhole Precision and Reliability Our BHP Tool Accessories range includes various components crucial for the efficient operation of bottom-hole pressure tools. From specialized adaptors that ensure secure fittings to protective carriers designed to safeguard sensitive instruments during deployment and retrieval, each accessory is crafted to meet the highest standards of quality and performance. By addressing the unique challenges of downhole environments, HOCA Oil Tools provides the oil and gas industry with solutions that not only meet but exceed operational demands. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools' BHP Tool Accessories means choosing a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to innovation and quality ensures that our products not only meet industry standards but also provide the reliability and performance essential for today's challenging oilfield environments. By integrating our BHP Tool Accessories into your operations, you are not only optimizing your downhole monitoring capabilities but also investing in the safety and longevity of your equipment. With HOCA Oil Tools, you gain access to a comprehensive suite of solutions designed to elevate your operational success. Choose HOCA Oil Tools for your BHP Tool Accessories and join the ranks of industry professionals who trust our products to enhance their downhole operations. Partner with us, and unlock the full potential of your oil and gas extraction activities with tools and accessories crafted for excellence. With HOCA Oil Tools, empower your downhole operations with precision-engineered solutions that deliver unmatched performance and reliability.

Buy

In Stock

Product & Service

New

API

Air Freight


Partnered with Jabra

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Your Communications with ALCiT's Jabra Partnership Seamless communication isn't just a convenience – it's a necessity. ALCiT proudly joins forces with Jabra to bring you cutting-edge Video Conference & Phone System Solutions. From transforming meetings to redefining collaboration, our partnership empowers your business to connect like never before. The Perfect Fit for Every Workspace In a world where every workspace is unique, the right device can make all the difference. ALCiT and Jabra collaborate to ensure you have the perfect tool for every scenario. Whether you're at your desk, on your phone, or collaborating with a team, our offerings cater to your diverse needs. Simplicity Redefined: Easy Set Up for Productivity We understand that time is of the essence, and productivity waits for no one. That's why ALCiT's Jabra solutions offer plug-and-play simplicity. Set up becomes a breeze, allowing you to dive into productive meetings with minimal hassle. Embrace a world where connectivity is instant and efficiency is paramount. Exuding Professionalism, Enhancing Performance The heart of professionalism lies in how you present yourself – or in this case, how you sound. ALCiT's Jabra partnership equips you with professional-grade equipment, delivering superior audio quality that elevates your company's image. With pristine sound, your meetings not only run smoothly but exude the highest level of professionalism. Why Choose ALCiT's Jabra Solutions? Tailored for You: No two workspaces are alike, and we ensure you have the right device for your unique needs, ensuring optimal performance. Seamless Set Up: Plug-and-play simplicity ensures that setup is a breeze for everyone, saving you valuable time and minimizing technical obstacles. Professional Impression: Superior audio quality exudes professionalism, enhancing your company's reputation while ensuring productive, smooth-running meetings. Elevate Your Communications Today ALCiT and Jabra redefine how you connect, collaborate, and communicate. Embrace a future where every conversation is crystal clear, every collaboration is seamless, and every meeting is productive. Experience the power of ALCiT's partnership with Jabra.

Service

Made to Order

Service

New

ISO


Pipe Tally Tracking

PipeDNA is a cloud-based pipe management solution

Pipe Tally Tracking Made Effortless with PipeDNA: Enhancing Accuracy and Efficiency Accurate and efficient pipe tally tracking is crucial in the oil and gas industry to ensure the smooth flow of operations and maintain optimal inventory levels. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their pipe tally operations, automate workflows, and increase visibility, ultimately improving productivity and reducing costs. Streamline Pipe Tally Operations: PipeDNA offers a comprehensive set of tools to simplify the creation and management of pipe tally operations. With intuitive functionalities, users can effortlessly create and configure tally jobs, define parameters, and automate the entire tallying process. By eliminating the need for manual calculations and paperwork, PipeDNA streamlines pipe tally operations, saving time and reducing the potential for errors. Automated Workflows for Increased Efficiency: The automation capabilities of PipeDNA revolutionize pipe tally tracking, enabling stakeholders to implement standardized and efficient workflows. Once the tally operations are set up, PipeDNA automates the process by capturing real-time data and performing calculations, ensuring accurate and up-to-date tally results. By eliminating manual data entry and reducing human errors, PipeDNA enhances the overall efficiency of pipe tallying processes. Real-Time Visibility and Reporting: PipeDNA's inventory management and tracking feature provide real-time visibility into pipe utilization, activity, and trends. With a centralized dashboard, stakeholders can access comprehensive reports and analytics, allowing them to make data-driven decisions regarding inventory optimization, resource allocation, and operational planning. The ability to track pipe movements and monitor tally results in real-time empowers stakeholders with valuable insights, fostering informed decision-making. Seamless Integration for Enhanced Traceability: Identification and traceability are essential aspects of pipe management. PipeDNA excels in providing quick and accurate pipe identification through its integration capabilities. By seamlessly integrating with popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables users to easily identify and track pipe details, activity history, and traceability documentation. This integration ensures that stakeholders can swiftly locate and trace specific pipes, reducing downtime and improving operational efficiency. Designed for the Oil and Gas Industry: PipeDNA was meticulously crafted by drilling engineers and technology innovators to cater to the unique needs of stakeholders across drilling, manufacturing, and oilfield services. Whether it's drilling contractors, oilfield rental companies, oilfield and inspection services, steel pipe manufacturers, or pipe distribution and storage providers, PipeDNA offers tailored solutions to enhance their pipe tally tracking processes. Leveraging Emerging Technologies: At its core, PipeDNA leverages the latest advancements in technology to streamline workflows and digitize pipe management processes. The platform is RFID ready, offering seamless integration with RFID technologies such as labels and asset tags. Additionally, PipeDNA supports IoT data integration using the MQTT standard, enabling fast and efficient integration of sensor data. These emerging technologies empower stakeholders to harness the power of automation and data-driven insights for improved pipe tally tracking. PipeDNA revolutionizes pipe tally tracking in the oil and gas industry by providing a smart cloud-based platform that enhances accuracy, efficiency, and visibility. With its powerful features, seamless integration capabilities, and commitment to leveraging emerging technologies, PipeDNA empowers stakeholders to proactively manage their pipe tally operations, automate workflows, and make informed decisions based on real-time data. Streamline your pipe tally tracking processes with PipeDNA and elevate your operational efficiency to new heights.

Service

Currently in Use

Service

New

API

Air Freight


Fixed Blade Stabilizer for Coiled Tubing

FBS Coiled Tubing Tool

Introducing the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools: The Optimal Solution for Coiled Tubing Stability in Oil and Gas Well Interventions Marlin Oil Tools proudly presents the FBS (Fixed Blade Stabilizer), a cutting-edge downhole tool meticulously designed to enhance the stability and efficiency of well intervention operations. As part of the borehole assembly (BHA), the FBS plays a crucial role in centering the BHA relative to the well's axis, ensuring optimal performance during critical interventions, especially in wells with significant inclination or when coiled tubing (CT) exhibits residual bending. Here’s why the FBS is an indispensable tool for your operations. Key Features of the FBS (Fixed Blade Stabilizer): Precision Centering: Engineered to center the BHA within the well, the FBS ensures that tools like mills or perforators operate effectively at the heart of the wellbore, crucial for tasks requiring precise positioning such as milling or perforation. Versatile Application: Ideal for use in wells with various inclinations, up to 90 degrees, where the BHA tends to lie against the well wall, the FBS provides the necessary support to maintain the BHA in the optimal position. Enhanced Stability: By preventing the eccentric location of the CT BHA within the well, the FBS significantly reduces the risk of operational issues, ensuring smoother, more efficient well interventions. Robust Design: The fixed blades of the FBS are designed to withstand the harsh downhole conditions, offering durability and reliability throughout the operation. Elevate your well intervention strategies with the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum BHA stability and efficiency in oil and gas operations. The FBS excels in centering the BHA relative to the well's axis, ensuring accurate positioning for milling, perforation, and other precision-dependent tasks. With its ability to accommodate wells of up to 90 degrees inclination and correct CT BHA eccentricity, the FBS is your solution for enhancing operational effectiveness and reducing risks in challenging well conditions. Choose the FBS for unparalleled support and stability in your coiled tubing operations. Why Choose the FBS from Marlin Oil Tools? Optimized Well Intervention: Improves the accuracy and efficiency of milling and perforation tasks by centering the BHA. Adaptable to Various Well Inclinations: Provides consistent performance in wells with up to 90 degrees of inclination. Reliable Stability: Reduces operational complications by preventing the CT BHA from lying eccentrically in the well. Durable Construction: Built to endure the rigors of downhole environments, ensuring longevity and reliability. The FBS (Fixed Blade Stabilizer) by Marlin Oil Tools represents the forefront of downhole stabilization technology, ensuring that your well intervention operations are performed with the highest level of precision and efficiency. Incorporate the FBS into your coiled tubing operations to achieve optimal outcomes in well stability and intervention success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Diffuser Lens #1

Cap Lamp Lens

Provix in New Lowell

Meer informatie

Enhance Your Vision with the Wisdom Diffuser Lens #1 – Available Now at Provix Provix is excited to introduce the Wisdom Diffuser Lens #1 (model NWI-WLOA-LENS1), a specialized accessory designed to enhance the functionality of your cap light. Ideal for mining, construction, and other industries where clear, wide-range vision is essential, this diffuser lens is a must-have addition to your equipment. Optimized Lighting for Various Environments The Diffuser Lens #1 is expertly designed to fit Cap Light models 2, 3, and 4. It spreads light over a wide area, providing a soft, diffused beam that is perfect for illuminating large spaces without the harshness of direct light. This feature is especially beneficial in environments where clear, broad visibility is crucial for safety and precision. Versatile and Easy to Attach This lens is incredibly easy to attach and use. It seamlessly fits onto your existing Wisdom cap lights, transforming the beam into a more diffused and wide-ranging light. This versatility makes it an excellent tool for various professional and recreational activities, including mining, construction, outdoor adventures, and emergency response. Durable and Reliable Like all Wisdom products, the Diffuser Lens #1 is built to last. Its durable construction ensures it can withstand the rigors of tough working conditions, providing reliable performance time and time again. A Must-Have for Enhanced Visibility Whether you're working underground or in low-light conditions, the Wisdom Diffuser Lens #1 enhances your visibility, making your tasks easier and safer. It's an essential accessory for anyone who relies on cap lights for their work. Get Your Wisdom Diffuser Lens #1 Today Upgrade your cap light with the Wisdom Diffuser Lens #1 from Provix. Visit our website at www.provix.net to discover more about this unique product and explore our wide range of mining equipment designed to enhance your work experience.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Coiled Tubing Straight Bar

SBA Straight Bar

Introducing the SBA Straight Bar from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Well Intervention Precision Marlin Oil Tools proudly presents the SBA Straight Bar, a specially designed downhole tool that revolutionizes well intervention operations. As an integral part of the Bottom Hole Assembly (BHA), the SBA Straight Bar addresses the critical challenge of coil tubing deformation, ensuring a straighter and more effective pathway for well intervention tools. Key Features of the SBA Straight Bar: Enhanced BHA Stability: The SBA Straight Bar provides the necessary rigidity and straightness to the BHA, minimizing the risk of deformation and ensuring smoother operations. Improved Wellbore Navigation: By maintaining a straighter path, the SBA Straight Bar significantly reduces the chances of the BHA resting against the well walls or encountering obstacles during transitions. Optimal Centering: Its rigid and straight design aids in better centering of the BHA within the wellbore, crucial for the precision of well intervention tasks. Seamless Passage: The SBA Straight Bar facilitates seamless passage through wellbore expansions and recessions, including critical points like blowout preventers, enhancing operational safety and efficiency. Versatile Integration: Designed for easy integration into any BHA configuration, the SBA Straight Bar is suitable for a wide range of well intervention activities, offering unparalleled adaptability. Elevate your well intervention strategies with the SBA Straight Bar from Marlin Oil Tools, a leading-edge solution designed to combat coil tubing deformation and ensure precise downhole operations in the oil and gas industry. The SBA Straight Bar enhances BHA stability, improves wellbore navigation, and ensures optimal centering and seamless passage through wellbore transitions. This tool is an indispensable addition to your BHA, providing the rigidity and straightness necessary for effective well intervention. Choose the SBA Straight Bar for a reliable, efficient, and versatile solution to well intervention challenges. Why Choose the SBA Straight Bar from Marlin Oil Tools? Superior Operational Precision: Ensures straighter coil tubing pathways for enhanced precision in well intervention tasks. Increased Operational Safety: Minimizes the risk of BHA hang-ups and obstructions, ensuring safer operations. Adaptability to Well Conditions: Capable of navigating through complex well architectures, including areas of expansion and recession. Streamlined Well Intervention: Promotes smoother, faster, and more efficient well intervention procedures. The SBA Straight Bar by Marlin Oil Tools represents the forefront of downhole tool technology, providing operators with the means to enhance well intervention accuracy and operational success. Incorporate the SBA Straight Bar into your well intervention toolkit to achieve superior performance and outcomes.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Blowers Leasing

Boost Your Business Efficiency with Blower Leasing from CWB National Leasing Streamlining Operations with Flexible and Cost-Effective Equipment Solutions For businesses that require the use of blowers – whether for landscaping, construction, or industrial purposes – having reliable and efficient equipment is key to maintaining productivity. Leasing blowers through Canadian Western Bank (CWB) National Leasing provides an advantageous and financially savvy solution. Here’s how leasing blowers can benefit your business: 1. Rapid Equipment Acquisition CWB National Leasing prioritizes your business needs with a swift leasing process. Decisions are typically made within 48 hours of your application, ensuring that payment is promptly processed. This efficiency means your blowers can be delivered and operational quickly, reducing downtime and enhancing your operational capacity. 2. Enhanced Financial Flexibility Leasing blowers with CWB National Leasing boosts your buying power. By opting for periodic payments over a substantial initial purchase, you can free up capital for other crucial business areas. Additionally, the option to add extra features or accessories to your blowers for a small payment increase allows for customization to meet your specific needs. 3. Balanced Cash Flow Management Smaller lease payments over the term mean that your blowers start contributing to your business’s revenue while they are being paid off. This approach is essential in maintaining a healthy balance between expenses and income, fostering long-term business stability and growth. 4. Flexible Payment Options CWB National Leasing offers a range of payment plans, including seasonal, semi-annual, or annual options, to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing blowers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax situation. Conclusion Opting to lease blowers through CWB National Leasing is a strategic decision that equips your business with essential equipment while maintaining financial agility. It ensures access to high-quality blowers, vital for efficient operations, without the financial burden of a large upfront investment. This leasing approach paves the way for enhanced operational capabilities, business expansion, and increased profitability.

Service

In Stock

Service

New

ISO


X-Span bridge plug - BPX-SPAN

Bridge Plug

Introducing the BPX-SPAN, the elastomer-free bridge plug designed to withstand even the toughest well conditions. With the use of our patented metal to metal X-SPAN seal technology, the BPX-SPAN provides a mechanical seal and anchor to the casing wall, making it a great solution for wells that cause elastomers to swell on standard bridge plugs while running in the hole. The BPX-SPAN has a short design for quick removal and is capable of setting in any grade casing, including P-110. It also boasts a range of optional equipment, including a ceramic knock out sub, pump out sub, burst disc, tailpipe assembly with profile subs, and a velocity string, making it a versatile system for any well application. Unlike standard bridge plugs that can have exposed elastomers to create a seal to the casing wall, the BPX-SPAN's sealing element utilizes a metal to metal seal that bonds and seals to the casing wall, ensuring a reliable seal that won't fail during run-in and setting. With no moving parts, slips, shear screws, or set screws, you can trust the BPX-SPAN to provide a long-lasting solution for temporary or permanent service. Please note that for bridge plug applications, our published pressure ratings may not apply to the system, as those ratings are based on collapse and burst pressure ratings. However, with a rating of over 550°F, you can trust the BPX-SPAN to withstand even the harshest well conditions. If you have any questions about the BPX-SPAN or any other ID OILTOOLS system, please contact our Tech Services department for assistance. Choose the BPX-SPAN for a reliable, elastomer-free solution for all your well application needs.

Buy

In Stock

Product & Service

New

API

Sea Freight


Plug with Valve Sub-Assembly

Downhole Tools

Maximizing Downhole Efficiency with HOCA Oil Tools' Plug with Valve Sub-Assembly In the challenging and intricate world of downhole oil and gas operations, having reliable, high-quality tools is essential to ensure efficiency, safety, and the success of interventions. HOCA Oil Tools stands at the forefront of this industry with its innovative Plug with Valve Sub-Assembly, designed to cater to the critical demands of downhole environments. Our products are crafted to provide unparalleled performance, ensuring your operations run smoothly and effectively. HOCA’s Plug with Valve Sub-Assembly: Precision Engineered for Downhole Success Our Plug with Valve Sub-Assembly is specifically designed for robust and reliable downhole application, offering a versatile solution for various operational needs. These plugs are essential for tasks such as pressure isolation, testing, and fluid control within the wellbore. Made with precision and from high-grade materials, they are built to withstand the harsh downhole environment, ensuring durability and operational integrity. Experience the HOCA Oil Tools Advantage By integrating HOCA Oil Tools’ Plug with Valve Sub-Assembly into your downhole operations, you are choosing a solution that emphasizes quality, performance, and customer satisfaction. Our commitment to innovation and excellence ensures that our products meet the complex demands of the oil and gas industry, providing you with tools that not only meet but exceed your operational requirements. Our Plug with Valve Sub-Assembly represents the pinnacle of downhole tool design, offering a blend of reliability, efficiency, and performance. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with advanced solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and leverage the power of our Plug with Valve Sub-Assembly to enhance your operational success. Partner with us and embrace the future of downhole operations with tools that set new industry standards for quality and performance. With HOCA Oil Tools, elevate your downhole operations to new levels of efficiency and reliability, ensuring your success in the competitive oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Custom Application Development Services

Software Development

Eleks in Toronto

Meer informatie

Unleash Innovation and Elevate Your Business with ELEKS' Custom Application Development Services In today's dynamic business landscape, having a cutting-edge software solution that caters to your unique needs is no longer a luxury – it's a strategic necessity. ELEKS, a leader in the software engineering industry, offers a comprehensive suite of custom application development services that empower you to bring your boldest software visions to life. Our end-to-end approach ensures that your business stays ahead of the curve, delivering an exceptional user experience that sets you apart from the competition. Transforming Visions into Reality: How We Can Help You At ELEKS, we understand that every software vision is unique. Our custom application development service is designed to assist you in every step of your journey, from idea inception to implementation. Here's how we'll make a difference for you: 1. Validating Your Vision We kick-start your application development process with product design workshops that help shape your concepts and validate your ideas through data-led product design. Our Proof of Concept (PoC) development enables you to explore and invest in ideas that hold real business value, ensuring that your efforts are directed towards solutions with a high potential for success. 2. Innovating and Competing Innovation is at the heart of what we do. Our dedicated Research and Development (R&D) team is adept at crafting strategic solutions for even the most complex custom application development projects. Leveraging innovative technologies, we ensure that your products are tailor-made for rapidly evolving markets, giving you a competitive edge. 3. Maximizing Efficiency Automation is the key to releasing resources for delivering superior service. Once we've defined your application development requirements, we take full responsibility for the delivery team and project implementation. This allows you to concentrate on your core business activities while we handle the technical intricacies. 4. Accelerating Delivery Meeting demanding deadlines is crucial. Our nearshore team of software experts is here to assist you in cost-effectively achieving your goals, surpassing what in-house development alone can offer. With decades of experience and a proven delivery framework, we ensure consistency and minimize bottlenecks, enabling faster project delivery. 5. Ensuring Future-Proofing Future-proofing is paramount in the tech world. We establish a continuous integration/delivery process that lets you seamlessly check and deliver code changes across multiple platforms. This approach not only enhances your software ecosystem but also allows you to provide an exceptional service to your customers. 6. Ensuring Operational Resilience and Agility Incorporating Cloud, AI, and RPA technologies, we help you build digitally resilient ecosystems. These ecosystems allow you to adapt swiftly to market changes, fostering business growth. Our rigorous business analysis ensures a tailored, cost-effective technology solution that supports your business needs and continuity plans. Unveiling Our Services: Transforming Concepts into Reality ELEKS offers a range of comprehensive application development services to cater to all your needs: Desktop Software Our full-cycle application development includes seamless desktop app integration for various operating systems, ensuring a smooth experience for users of Windows, macOS, and Linux. Web Applications From technology consulting and UX design to front and back-end development, deployment, and support, our web application development service covers every aspect of creating successful web solutions. Custom Mobile Apps Our mobile application development services provide end-to-end solutions for iOS and Android platforms, delivering flawless performance, robust security, and an enhanced user experience. Data Warehouse and BI Solutions We specialize in delivering advanced Data Warehouse and Business Intelligence solutions across different domains, unlocking actionable insights and driving operational efficiency. Our Workflow: Making Your Vision a Reality Our application development process involves key steps that ensure the success of your project: 1. Idea Validation: We collaborate with you to outline your requirements, identifying ideas that hold the most potential for long-term success. 2. Innovation and Development: Our expert development team designs a custom solution utilizing emerging technologies to address gaps in your current IT ecosystem. 3. Software Testing: We ensure your custom app meets both functional requirements and quality standards, performing user acceptance testing and providing support with technical documentation. 4. Project Governance: Our governance covers product deployment, progress reporting, and issue resolution, keeping you informed and your project on track. When you partner with ELEKS, you're partnering with a Top 100 Global Outsourcing development company that places your project in capable hands. Unlock Your Potential with ELEKS ELEKS' custom application development services are more than just solutions – they are opportunities to innovate, compete, and thrive in the digital age. With a dedicated team of over 2000 software experts and a proven track record of success, we're ready to transform your ideas into reality. Contact us today to embark on a journey of innovation, efficiency, and growth with ELEKS as your trusted partner.

Service

Made to Order

Product & Service

New

ISO


MS-201 Multistage Steam Turbine

Back Pressure Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


5 inch WR-SCSSSV Bigbore

WR-SCSSSV Bigbore 5 inch

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


External Slip type Connector for Coiled Tubing

ESC Coiled Tubing Tool

Introducing the Innovative ESC (External Slip Type Connector) by Marlin Oil Tools: Your Solution for Reliable Coiled Tubing Connections in the Oil and Gas Industry Marlin Oil Tools is at the forefront of delivering cutting-edge solutions tailored for the dynamic needs of the oil and gas sector. Our latest innovation, the ESC (External Slip Type Connector), is designed to revolutionize well intervention operations by providing a secure and efficient method to connect the smooth lower end of coiled tubing (CT) to any downhole tool. Here’s why the ESC stands as a pivotal advancement in coiled tubing technology: Key Features of the ESC (External Slip Type Connector): Innovative Connection Design: The ESC boasts an internal collet mechanism with inward-pointing teeth, ensuring a tight grip on the smooth outer wall of the CT. This design guarantees a secure connection, vital for the successful execution of well intervention jobs. Enhanced Sealing Capabilities: Equipped with two O-rings made from the highly durable FKM 90 material, the ESC offers exceptional sealing, isolating the internal space of the connector from the annulus. This feature is crucial for maintaining the integrity of well operations and preventing fluid leakage. Robust and Reliable: The use of a trapezoidal thread in conjunction with high-quality metals provides a connection that is not only reliable but also capable of withstanding the rigorous demands of downhole activities. The ESC is built to ensure the safety and efficiency of well work. Versatile Tool Connection: The lower housing of the ESC features a standard working taper thread, making it compatible with a wide range of downhole tools. This versatility allows for seamless make-up and enhances the tool's utility across various well intervention scenarios. Marlin Oil Tools presents the ESC (External Slip Type Connector), an essential coiled tubing tool for oil and gas well intervention. Designed to securely link the smooth lower end of CT to threaded downhole tools, the ESC is engineered for reliability and efficiency. Featuring an internal collet with inward-pointing teeth for a firm grip, and dual O-rings made from FKM 90 for superior sealing, this connector ensures operational integrity. With its trapezoidal thread and high-quality metal construction, the ESC stands as a beacon of durability in harsh downhole environments. Its standard working taper thread accommodates various downhole tools, making it a versatile addition to your well intervention arsenal. Why Choose the ESC from Marlin Oil Tools? Security and Efficiency: The ESC’s innovative design ensures a secure connection between coiled tubing and downhole tools, optimizing well intervention operations. Superior Sealing: With its advanced sealing capabilities, the ESC prevents fluid leakage, protecting the well's integrity. Durability: Built with high-quality materials and a robust thread design, the ESC is designed to endure the toughest downhole conditions. Versatility: Its compatibility with a broad range of downhole tools makes it a flexible solution for various well intervention needs. Elevate your well intervention operations with the ESC (External Slip Type Connector) from Marlin Oil Tools. Contact us today to discover how our solutions can enhance your efficiency and operational success in the oil and gas industry.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Laboratory Services

Lab

Cleanstream's State-of-the-Art Laboratory Facility Offers Fast, Accurate and Environmentally-Friendly Solutions for NORM and LSA Contaminants Cleanstream is proud to announce the opening of its own laboratory facility, which offers quick and accurate identification of (NORM) sediments and deposits in and on materials and equipment. Our experts quantify and provide an environmentally-friendly solution from our product portfolio to ensure that your property is cleaned with the utmost safety and efficiency. Our laboratory services and analyses cater to all types of materials, both NORM contaminated and non-NORM contaminated. Basic Identification Our laboratory performs an analysis of metallurgy and scale deposits, including NORM / LSA samples, to identify the most effective treatment method for steel metallurgy, sediment/deposit identification, and soil characteristics. Solubility and Compatibility Analysis We perform solubility tests with our environmentally-friendly products and report on their performance. Our various eco-friendly products are readily available from our stock. Features of Cleanstream Laboratory Our laboratory is authorized to analyze NORM / LSA samples and provides screening of chemical dissolvers. We are proud of our fast turnaround time and can supply laboratory analyzes as a standard with product purchase. With Cleanstream's state-of-the-art laboratory facility, you can rest assured that your property will be treated with the most advanced and eco-friendly solutions available. Our goal is to ensure your safety while minimizing environmental impact. Trust Cleanstream for all your NORM and LSA decontamination needs!

Service

Currently in Use

Service

New

ISO

Land Freight


Pull and Set SCSSV

InWaTec Combined: Ensuring Well Integrity with Advanced Pulling and Setting SCSSV Services The oil and gas industry faces the critical challenge of maintaining well integrity for uninterrupted production. At InWaTec Combined, we understand the importance of robust well operations, and our Pulling and Setting Surface Controlled Subsurface Safety Valve (SCSSV) services are at the forefront of addressing this challenge. Revolutionizing DHSV Repair A malfunctioning Downhole Safety Valve (DHSV) can halt production and compromise well integrity, making timely and efficient repairs crucial. Our services are meticulously designed to repair Tubing Retrievable Subsurface Safety Valves (TRSSSV), a process that not only restores well integrity but also resumes production swiftly. By repairing TRSSSVs, we circumvent the need for lock open operations, avoiding the necessity of installing a Wireline Retrievable Subsurface Safety Valve (WRSSSV) which could potentially restrict production flow. Optimized Repair Techniques Conventional repair methods are often time-consuming and costly, requiring extensive workover operations. InWaTec Combined’s approach replaces these outdated methods with cutting-edge techniques that save time and reduce costs. Our expertise in pulling and setting SCSSVs ensures that if a TRSSSV's functionality and integrity cannot be restored, it can be locked open efficiently. We then install a WRSSSV, which is a strategic move that prevents the need for a complex workover, thereby optimizing the repair process. Maintaining Peak Performance The ability to swiftly switch from a TRSSSV to a WRSSSV without a full workover is a game-changer in well service operations. It minimizes downtime and ensures that wells can continue to operate at peak performance levels. Our dedicated teams are equipped with the latest technology and have the expertise to execute these operations seamlessly, ensuring minimal disruption to your production schedules. A Partner in Well Integrity At InWaTec Combined, we pride ourselves on being your trusted partner in maintaining well integrity. Our Pulling and Setting SCSSV services are not just about repairs; they are about providing a comprehensive solution that safeguards your operations against future integrity issues. With our advanced techniques and committed service, we guarantee that your wells remain productive, secure, and profitable. In conclusion, InWaTec Combined is dedicated to providing superior service in the repair and maintenance of SCSSVs. Our innovative approach is designed to keep your wells functioning smoothly, ensuring that well integrity is not just restored but fortified. Trust us to be the guardians of your well's safety and productivity.

Service

In Stock

Service

New

API

Land Freight


Ultra High Density Power Supply for Subsea

Subsea Power Supply

Unleash Unrivaled Power: Poseidon Robotics' Ultra High Density Power Supplies for Subsea Exploration In the mesmerizing depths of the ocean, where the most critical subsea missions take place, a reliable and efficient power supply can be the difference between success and failure. At Poseidon Robotics, we take pride in introducing our latest breakthrough innovation - the Ultra High Density Power Supplies. Designed to thrive in the most challenging subsea environments, our power supplies empower your ROVs and subsea equipment to achieve unparalleled performance, even at depths of up to 400 meters. Harness the Power of Innovation As pioneers in subsea robotics, we understand the unique demands of the underwater world. That's why we have poured our expertise and passion into crafting the Ultra High Density Power Supplies. These cutting-edge power solutions are engineered to deliver optimal performance while meeting the strictest safety and reliability standards. Power Up Your Subsea Missions With our Ultra High Density Power Supplies, you can unleash the full potential of your subsea equipment. Whether you are conducting deep-sea research, underwater inspections, or oil and gas exploration, these power supplies will be the backbone of your mission's success. Compact, Yet Powerful Size and weight are crucial considerations in subsea operations. Our Ultra High Density Power Supplies are meticulously designed to maximize power output while maintaining a compact and lightweight form factor. This ensures seamless integration with your existing ROV or subsea systems, allowing for more efficient deployment and operation. Built for the Depths Operating in the deep ocean is no easy feat. Our power supplies are rigorously tested and rated for depths of up to 400 meters, providing you with the confidence to tackle the most challenging subsea missions. No matter how extreme the conditions, our power supplies will deliver unwavering performance. Safety and Reliability Above All At Poseidon Robotics, safety is our top priority. Our Ultra High Density Power Supplies are engineered with advanced safety features, ensuring protection against voltage spikes, short circuits, and overloads. You can trust that your equipment and personnel are safeguarded during every underwater operation. The Poseidon Advantage Choosing Poseidon Robotics means partnering with a company that has a proven track record of excellence in subsea technology. Our power supplies are the result of meticulous research, engineering expertise, and a passion for pushing the boundaries of what's possible beneath the waves. Experience the Future of Subsea Power Are you ready to take your subsea missions to new depths of success? Embrace the power of innovation with Poseidon Robotics' Ultra High Density Power Supplies. Whether you are an oceanographer, offshore engineer, or underwater explorer, our power supplies will be the driving force behind your mission's achievements. Explore the Depths with Poseidon Robotics Join the ranks of leading subsea explorers and choose Poseidon Robotics as your trusted partner. Our Ultra High Density Power Supplies are the key to unlocking the full potential of your subsea ventures. Contact us today to elevate your underwater capabilities and embark on a journey of endless possibilities beneath the waves.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Containers Leasing

Streamline Your Logistics with Shipping Container Leasing from CWB National Leasing Enhancing Your Storage and Transportation Capabilities with Flexible Leasing Solutions For businesses involved in logistics, transportation, or needing additional storage solutions, shipping containers are essential. Leasing shipping containers through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to expand their operational capabilities. Here’s how leasing shipping containers can benefit your business: 1. Rapid Access to Storage and Transportation Solutions CWB National Leasing understands the importance of timely access to logistical resources. They offer a quick and efficient leasing process, typically providing decisions within 48 hours of application submission. This rapid turnaround ensures that your shipping containers can be delivered and operational quickly, enhancing your storage and transportation capabilities without delay. 2. Increased Financial Flexibility Leasing shipping containers with CWB National Leasing boosts your financial power. Opting for periodic payments over a large upfront purchase frees up capital for other vital aspects of your business. Additionally, the option to add extra features or accessories to your containers for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your shipping containers start contributing to your business’s revenue while they’re being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Advantages Leasing shipping containers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease shipping containers through CWB National Leasing is a strategic decision that provides your business with essential logistics equipment while maintaining financial flexibility. It ensures access to high-quality shipping containers, crucial for efficient storage and transportation, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved logistics management, and increased profitability, helping your business to excel in the competitive marketplace.

Service

In Stock

Service

New

ISO


Printers Leasing

Boost Your Business Efficiency with Printer Leasing from CWB National Leasing Revolutionizing Your Document Handling with Flexible and Advanced Printing Solutions In the modern business landscape, having access to high-quality printers is essential for efficient document management and communication. Leasing printers through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to enhance their printing capabilities. Here’s how leasing printers can benefit your business: 1. Fast Access to High-Performance Printers CWB National Leasing recognizes the importance of advanced printing technology in your business operations. They offer a quick leasing process, with decisions typically made within 48 hours of application submission. This ensures that your printers can be delivered and operational quickly, enhancing your productivity and meeting your document handling needs promptly. 2. Increased Financial Flexibility Leasing printers with CWB National Leasing enhances your buying power. It allows you to free up capital by opting for periodic payments over a substantial upfront purchase. The flexibility to add extra features or accessories to your printers for a small payment increase allows for customization to meet specific business requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your printers start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal variations in revenue, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing printers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease printers through CWB National Leasing is a strategic decision that provides your business with essential printing equipment while maintaining financial agility. It ensures access to state-of-the-art printers, vital for efficient and high-quality document production, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved document quality, and increased productivity, contributing significantly to the success and growth of your business in a competitive market.

Service

In Stock

Service

New

ISO


Stay Cybersecure

Cybersecurity

ALCiT in Mississauga

Meer informatie

Stay Cybersecure with ALCiT: Your Shield in an Uncertain Digital Realm In a world where digital threats lurk at every corner, staying cybersecure is no longer an option—it's a necessity. But we get it; navigating the intricacies of cybersecurity can be overwhelming, even frightening. That's where we come in, your unwavering allies in the pursuit of digital safety. Empowerment Through Expertise ALCiT stands as a beacon of assurance in the cybersecurity landscape. As trusted experts, we specialize in assisting Small and Medium Enterprises (SMEs) on their journey to become and remain cybersecure. You've laid the foundation, you've improved your cyber resiliency, and now it's time to complete the puzzle by staying cybersecure. Master the Art of Staying Secure Cyber threats are relentless, but so are we. With ALCiT's managed services, you can confidently detect cyber threats, respond to incidents, and maintain your cybersecure stronghold. Our solutions go beyond the traditional; they encompass a holistic approach that equips your organization with the tools and strategies needed to stay ahead. Why Choose Cybersecurity with ALCiT? Tech in Check: Keeping your technology secure is our priority. We diligently monitor, update, and optimize your tech environment, ensuring every vulnerability is addressed and every weakness fortified. Team Training: Empower your team to be your first line of defense. Our comprehensive training programs arm them with the knowledge to identify and respond effectively to potential threats. Vigilance is Key: Staying vigilant is half the battle. Our managed services include real-time monitoring, ensuring that any abnormal activity is detected and neutralized promptly. Effective Response: Cyber incidents can strike anytime. With ALCiT by your side, you're equipped to respond swiftly and effectively, minimizing potential damage and ensuring business continuity. Efficient Recovery: The aftermath of an attack can be daunting, but we've got your back. ALCiT's recovery strategies are designed to expedite your return to normalcy, reducing downtime and impact. Secure Today, Thrive Tomorrow ALCiT stands for more than just services; we stand for security, empowerment, and peace of mind. Let us be your cybersecurity partner as you navigate the intricate landscape of digital threats.

Service

Made to Order

Service

New

ISO


Welding Machine TIG AC/DC 501 Pulse

Welder

Unleash Precision Welding with the TIG AC/DC 501 Pulse! At Canaweld, we take pride in providing the oil and gas industry with welding solutions that redefine excellence. Introducing the TIG AC/DC 501 Pulse – a welding powerhouse that embodies power, intelligence, and versatility. Crafted to meet the demands of professional production TIG welders, this welding machine sets the standard for precision and performance. Unmatched Versatility The TIG AC/DC 501 Pulse empowers you with the freedom to choose between AC or DC TIG welding, including stainless steel, mild steel, or aluminum, as well as Stick welding. Whatever your welding application demands, this welding marvel delivers impeccable results, leaving no room for compromise. Power Meets Intelligence Equipped with advanced TIG welding parameters, the TIG AC/DC 501 Pulse allows you to fine-tune your welding process, ensuring exceptional welds tailored to your specific applications. The easy-to-use interface with digital adjustment of all welding parameters puts you in complete control, simplifying your welding experience. Unparalleled Monitoring and Control Experience full monitoring of welding parameters with the digital ammeter and voltmeter, offering precise current presetting and a convenient hold function. The welding process selector enables seamless switching between TIG AC, TIG DC, TIG DC 'Lift,' and MMA modes, catering to diverse welding needs. Choose from 2 Stroke, 4 Stroke, Cycle, and Spot Timer modes with the welding mode selector, adding flexibility to your welding operations. Personalized Welding Programs The TIG AC/DC 501 Pulse takes customization to new heights, allowing you to store personalized welding programs, memorizing your preferred settings for each unique project. This feature streamlines your workflow and ensures consistency in every weld. Precision Pulse TIG Welding Achieve precision like never before with pulse TIG welding, adjustable from 0.5 up to 200 Hz, and take advantage of the "EASY PULSE" feature for added convenience. Fine-tune your welding experience with AC square wave balance and Balance Plus adjustments, as well as AC square wave frequency control. Unleash Your Creativity With the TIG AC/DC 501 Pulse, you have the power to control the arc striking and arc dynamics with tungsten rod diameter presetting. Explore the wave selector with Square, Mixed, Sinusoidal, and Triangular options, providing you with endless possibilities for your welding projects. The Canaweld Promise As with all Canaweld products, the TIG AC/DC 501 Pulse embodies durability, reliability, and excellence. Our commitment to quality and customer satisfaction is reflected in our comprehensive 3-year warranty, giving you the peace of mind you deserve. Elevate your welding capabilities with the TIG AC/DC 501 Pulse. Unleash precision welding like never before and let Canaweld be your trusted partner in achieving welding perfection. Embrace power, intelligence, and versatility with the TIG AC/DC 501 Pulse - Welding Perfected!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


ROV Transport Case

ROV Shipping Case

Secure Your ROV with Poseidon Robotics' Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. At Poseidon Robotics, we understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always At Poseidon Robotics, safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. The Poseidon Advantage With years of experience in subsea robotics and ROV technology, Poseidon Robotics has earned a reputation for excellence in the industry. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today When it comes to ROV transportation, trust Poseidon Robotics to deliver the best. Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection with Poseidon Robotics!

Buy

In Stock

Distributor

New

ASME

Air Freight


Tuition Payments for Studying Abroad

Personal Financial FX Service

Simplify Your Personal Finances with Dunbridge Financial Are you a parent with kids studying in a different country, or do you need to transfer money to an international account quickly and securely? Look no further than Dunbridge Financial! We are your trusted partner for all your personal financial needs, offering a wide range of services to make your life easier. Our Personal Services cater to various requirements, from tuition payments for international education to seamless money transfers worldwide. Tuition Payments Made Easy Sending tuition payments for your children studying abroad should be a seamless experience. With Dunbridge Financial, you can bid farewell to complicated processes and uncertainty. We streamline the tuition payment process, making it quick and hassle-free. Rest assured, your funds will reach the intended destination promptly, so your kids can focus on their education while you enjoy peace of mind. Swift and Secure International Transfers Whether it's supporting family members overseas, investing in international opportunities, or managing your global finances, transferring money abroad should never be a source of stress. At Dunbridge Financial, we understand the importance of secure and efficient transactions. Our platform offers quick and secure transfers to over 100 countries, giving you the power to choose where and who receives your money. Why Choose Dunbridge Financial? 1. Live Rates with No Hidden Fees Transparency is at the core of our values. With Dunbridge Financial, you'll never encounter hidden fees or unpleasant surprises. What you see is what you get - access our live exchange rates and maximize the value of your money. 2. Security First Your financial security is our top priority. We partner with payment service providers compliant with ISO27001, ensuring that your funds and data are handled safely and securely. Rest assured, your personal information remains protected. 3. Effortless Money Transfers Sending money globally shouldn't be a complicated process. Our user-friendly platform allows you to send funds to your desired location with ease. Choose your destination, lock in your rate, and you're all set - it's that simple! Experience the Dunbridge Difference Today At Dunbridge Financial, we are more than just a financial service provider. We are your partner in building a secure and prosperous future. Our commitment to excellence and customer satisfaction sets us apart from the rest. Join Dunbridge Financial and Embrace Financial Freedom Unlock the potential of hassle-free tuition payments and secure international money transfers with Dunbridge Financial. With our personalized support, competitive rates, and robust security measures, you can trust us to handle your personal finances with care. Sign Up Today Experience the convenience of our Personal Services firsthand. Join Dunbridge Financial today and embark on a journey of financial ease and empowerment. No matter the destination, we'll help you get there quickly and securely. Say goodbye to financial complexities and hello to a brighter future with Dunbridge Financial.

Service

Made to Order

Service

New

ISO

Air Freight


Currency Management of Foreign Investments

Foreign Exchange For Investment Property

Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.

Service

Made to Order

Service

New

ISO

Air Freight


Infrastructure Management

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Your IT Environment with ALCiT's Infrastructure Management Services In the ever-evolving landscape of technology, your IT infrastructure isn't just a backdrop – it's the canvas upon which your business creates, collaborates, and thrives. At ALCiT, we understand the pivotal role that proper infrastructure management plays in achieving cyber resilience and driving productivity. Let us be your partner in optimizing and securing your digital foundation. Optimized and Secured by Default Imagine an IT environment that's not just a support system, but a catalyst for your success. ALCiT's Infrastructure Management services ensure that your assets are optimized and secured by default. Whether it's networks, servers, firewalls, or PCs, we've got you covered with a holistic approach that safeguards your digital infrastructure while you focus on your core business. Leave the Management to the Experts The day-to-day management of IT infrastructure demands expertise and attention to detail. ALCiT steps in as your trusted Managed Service Provider (MSP), relieving you of the intricacies of maintenance. Our trained personnel possess the skills to manage your networks, servers, firewalls, and PCs seamlessly, ensuring everything functions at its best, all while you concentrate on driving your business forward. Typical Services Tailored to Your Needs Resolution at Speed: Technical issues are inevitable, but delays aren't. ALCiT's infrastructure management swiftly resolves issues, minimizing downtime and ensuring your systems stay operational. Patch and Fix Assurance: Staying up to date with patches and fixes is a critical defense against vulnerabilities. We meticulously install patches on all devices, ensuring your infrastructure remains fortified. Disaster Recovery Planning: Preparedness is paramount. We meticulously plan and execute disaster recovery exercises, stress-testing your infrastructure to ensure it's robust and ready for any unforeseen event. Secure Today, Empower Tomorrow Your IT infrastructure should empower your business, not hinder it. ALCiT's Infrastructure Management services go beyond mundane maintenance – they fuel your progress. With us, you can rest assured that your digital assets are in the hands of experts who understand the intricacies of optimizing and securing IT environments. Discover the freedom to focus on your core business as we ensure your IT infrastructure operates seamlessly.

Service

Made to Order

Service

New

ISO


Welder's Cart

Welding Cart for Single Phase Machines

Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Long Haul Link Repairs

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence.

Service

In Stock

Service

New

ISO


Composite Bridge Plug

CBP CT Bridge Plug

Introducing the CBP Composite Bridge Plug from Marlin Oil Tools: The Cutting-Edge Solution for Temporary Well Barrier Operations Marlin Oil Tools is proud to present the CBP Composite Bridge Plug, a state-of-the-art downhole tool designed for optimal performance in oil and gas well operations. Engineered for easy installation using a hydraulic Setting Tool (STT), the CBP Composite Bridge Plug provides an effective temporary barrier within the well, isolating underlying intervals for enhanced operational control and safety. Key Features of the CBP Composite Bridge Plug: Efficient Installation: Utilizes a hydraulic Setting Tool (STT) for quick and secure deployment in oil and gas wells. Reliable Well Isolation: Designed to create a temporary barrier, effectively cutting off underlying intervals to manage wellbore integrity. Easy Removal Process: The composite bridge plug can be easily milled away using standard milling BHA, facilitating straightforward removal. Durable and Reliable Construction: Features collets with an easily drilled design, made from high-quality composite materials and reinforced with ceramic cylinders for increased durability. Proven Field Performance: The reliability and effectiveness of the CBP Composite Bridge Plug have been validated through extensive field work, ensuring dependable well isolation. Maximize your well intervention and maintenance operations with the CBP Composite Bridge Plug from Marlin Oil Tools, a premier solution for establishing temporary barriers in oil and gas wells. Engineered with advanced composite materials and ceramic cylinders, the CBP offers unmatched reliability and ease of installation using a hydraulic Setting Tool (STT). Whether you need to isolate wellbore intervals or ensure operational safety, the CBP Composite Bridge Plug's field-proven technology and easy milling process make it an indispensable tool for modern well operations. Choose the CBP for efficient, reliable, and easy-to-remove wellbore isolation. Why Choose the CBP Composite Bridge Plug from Marlin Oil Tools? Superior Wellbore Isolation: Offers effective temporary isolation, improving operational safety and control. Streamlined Installation and Removal: Designed for ease of installation and removal, reducing downtime and operational costs. Advanced Material Construction: Utilizes composite materials and ceramic cylinders for enhanced durability and reliability. Field-Tested Technology: Backed by extensive field testing, ensuring proven performance in various well conditions. The CBP Composite Bridge Plug by Marlin Oil Tools represents the forefront of downhole tool innovation, providing oil and gas operators with a reliable, efficient solution for temporary wellbore isolation. Incorporate the CBP into your operations to benefit from its superior performance and ease of use.

Buy

Made to Order

Manufacturer

New

API

Land Freight


12 unit Locking FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

Meer informatie

Secure and Efficient Charging with the CSA 12 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 12 Unit Locking FAST Charger Rack (Part # NWI-NWCR-12BLC), a compact yet powerful charging solution designed for the efficient management of mining and industrial lighting equipment. This charger rack combines fast charging capability with enhanced security, making it an ideal choice for smaller teams or tight spaces. Fast Charging for Essential Equipment Designed to keep pace with the demanding schedules of modern mining and industrial operations, the CSA charger rack offers rapid charging times of 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This quick turnaround ensures your equipment is ready to go when you are, reducing downtime and boosting productivity. Locking Feature for Added Security One of the key advantages of the CSA 12 Unit Charger Rack is its locking mechanism. This feature provides added security for your valuable equipment, ensuring it remains safe and secure while charging. Ideal for locations where additional protection is desired, the locking rack is a safeguard against unauthorized access or removal of the equipment. Compact Design for Space Efficiency The compact size of the CSA 12 Unit Charger Rack is perfect for operations where space is at a premium. It’s designed to be single-sided, making it easy to place in equipment rooms, workshops, or mobile units, maximizing space utility without compromising on charging capacity. Durable and Reliable Built to withstand the harsh environments typical of mining and industrial settings, the CSA charger rack is durable and reliable. Its robust construction guarantees long-term performance, representing a smart investment for operations focused on efficiency and security. Ideal for Smaller Teams or Limited Spaces This charging solution is particularly well-suited for smaller mining crews, construction teams, or rental fleets. It allows for the management of multiple devices without needing a large amount of space, making it a versatile choice for various operational sizes and types. Upgrade Your Charging Station Today The Wisdom CSA 12 Unit Locking FAST Charger Rack is available now at Provix. Enhance your equipment management with this efficient, secure, and space-saving solution. Visit www.provix.net to learn more and bring advanced charging capabilities to your operation.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Drillpipe Management

PipeDNA is a cloud-based pipe management solution

Streamline Drill Pipe Management with PipeDNA: Enhancing Efficiency and Visibility on the Drilling Rig Efficient management of drill pipe is a critical factor in ensuring smooth drilling operations in the oil and gas industry. Introducing PipeDNA, a smart new platform designed to revolutionize the way drill pipe is managed on the drilling rig. With its cloud-based solution and powerful features, PipeDNA empowers drilling contractors, oilfield rental companies, and oilfield services providers to proactively manage their drill pipe inventory, increase visibility, and optimize their drilling operations. Full Inventory Management and Tracking: PipeDNA offers a comprehensive set of features that enable drill pipe stakeholders to gain complete control over their inventory. With its inventory management and tracking capabilities, PipeDNA provides real-time information on drill pipe utilization, activity, and trends. This invaluable insight allows drilling contractors to make informed decisions regarding drill pipe allocation, maintenance schedules, and resource optimization. Efficient Logistics Management: Managing logistics operations on the drilling rig can be complex and time-consuming. PipeDNA simplifies this process by offering robust logistics management functionalities. Users can efficiently handle shipments, track the status of drill pipe deliveries, manage documentation, and even bundle pipes for streamlined transportation. With PipeDNA, logistics become a well-coordinated and seamless aspect of drill pipe management, saving time and resources. Streamlined Inspection Management: Inspection is crucial for ensuring the integrity and safety of drill pipe. PipeDNA's inspection management feature enables users to efficiently manage inspection jobs across multiple sites, track job statuses, and maintain inspection profiles. This capability ensures that inspections are conducted in a timely manner, minimizing downtime and optimizing drilling operations. Automated Tally Operations: Pipe tallying is a time-consuming task prone to human errors when done manually. PipeDNA simplifies tally operations by providing users with the ability to create and manage tally operations. Automated workflows streamline the tallying process, reducing errors and saving valuable time. By automating tally operations, PipeDNA allows drill pipe stakeholders to focus on more critical aspects of their drilling operations. Enhanced Identification and Traceability: Quick and accurate identification of drill pipe assets is crucial for efficient drilling operations. PipeDNA offers a robust identification and traceability system that provides users with comprehensive drill pipe details, activity history, and traceability documentation. With PipeDNA, drill pipe stakeholders can quickly locate and track specific pipes, ensuring smooth operations and minimizing the risk of errors. Support for Various Drill Pipe Types: PipeDNA's innovative technology is designed to accommodate various types of drill pipe, providing flexibility and adaptability. The platform supports the management of new and premium drill pipe, conventional and spiral HWDP (Heavy Weight Drill Pipe), landing strings, and drilling risers. Whether it's EUE or NUE tubing, workover strings, slick or spiral drill collars, or API 6A flanges, PipeDNA can efficiently manage a wide range of drill pipe and tube types, catering to the diverse needs of the drilling industry. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to streamline workflows and digitize drill pipe management processes. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating seamless identification and tracking. PipeDNA is also RFID-ready, providing integration support for RFID technologies, including labels and asset tags. Furthermore, the platform supports IoT data integration using the MQTT standard, allowing fast and efficient integration of sensor data. PipeDNA is transforming drill pipe management on the drilling rig, offering a cloud-based platform that enhances efficiency, increases visibility, and optimizes drilling operations. With its powerful features, seamless integrations, and innovative technology, PipeDNA empowers drilling contractors, rental companies, and oilfield services providers to proactively manage their drill pipe inventory, reduce costs, and improve overall performance. Streamline your drill pipe management processes with PipeDNA and elevate your drilling operations to new heights of productivity and success.

Service

Currently in Use

Service

New

API

Air Freight


Test Tools

Downhole Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Test Tools In the highly specialized field of oil and gas exploration, precision, reliability, and efficiency are paramount. HOCA Oil Tools stands at the forefront of downhole technology, offering an extensive range of Test Tools designed to optimize and ensure the integrity of downhole operations. Our Test Tools are engineered to address the complex challenges encountered in modern well environments, enabling operators to conduct thorough evaluations and maintain control over their downhole conditions. HOCA's Test Tools: Precision Engineered for Optimal Downhole Performance HOCA Oil Tools' Test Tools are meticulously designed for testing tubing, locating leaks, setting hydraulic-set packers, and evaluating well integrity. These tools are crucial for maintaining well safety and efficiency, providing operators with accurate data to make informed decisions. Built from high-grade materials and adhering to strict industry standards, our Test Tools withstand the harsh downhole environment, delivering reliable performance and ensuring successful operations. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Test Tools means selecting a partner committed to your operational success. Our dedication to quality, innovation, and customer support ensures that our products not only meet but exceed the expectations of the demanding oil and gas industry. Integrating our Test Tools into your downhole operations signifies a step towards enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just equipment; you acquire a strategic advantage backed by our expertise and unwavering support. Opt for HOCA Oil Tools for your downhole testing needs and join the ranks of satisfied clients who trust our Test Tools to optimize their operations. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Valve and Prong Type Equalizing Sub-Assembly

Downhole Tools

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


HDI 3200 MGS Differential Monitoring System

Mud Gas Monitor

Ensure precise monitoring of liquid seal pressure, mud gas pressure, and mud temperature with the advanced HDI 3200 MGS Differential Monitoring System. Designed as a stand-alone, battery-powered solution, this monitoring system is specifically engineered to provide accurate readings and reliable performance in the most demanding environments. Unparalleled Accuracy and Reliability: At HDI, accuracy and reliability are at the core of everything we do. The HDI 3200 MGS system utilizes field-proven HDI Gauges, renowned for their precision and durability. With our system, you can trust that your pressure and temperature measurements are accurate and dependable, empowering you to make informed decisions and maintain optimal operational control. Detailed Monitoring and Differential Readings: The HDI 3200 MGS system goes beyond basic pressure and temperature measurements. It offers the unique capability to monitor the differential pressure between liquid seal and mud gas pressures, providing valuable insights into your well conditions. By accurately measuring the differential, you can gain a deeper understanding of the dynamics within your system, enabling you to make timely adjustments and optimize performance. Alternate Engineering Units for Versatile Applications: Flexibility is key in any monitoring system. With the HDI 3200 MGS, you can easily switch between engineering units to suit your specific needs. Whether you prefer PSI increments or an alternative unit of measurement, our system accommodates your requirements, ensuring compatibility with your existing workflows and standards. Seamless Integration and Secondary Output: The HDI 3200 MGS system offers seamless integration with local and remote visual displays, providing you with the flexibility to monitor and track readings from different locations. Additionally, the system features a 4-20mA secondary output, allowing for easy integration with other monitoring systems or data acquisition devices. This enables you to centralize your data and streamline your monitoring processes for enhanced efficiency. Depend on Houston Digital Instruments: With a legacy of excellence in measurement and control solutions, Houston Digital Instruments is a trusted partner in the industry. Our commitment to accuracy, reliability, and safety shines through in every product we develop. The HDI 3200 MGS Differential Monitoring System is a testament to our dedication to providing innovative solutions that meet the evolving needs of our customers. Experience the power of precision monitoring. Contact our knowledgeable team today to discuss your specific requirements and discover how the HDI 3200 MGS can revolutionize your operations. Trust Houston Digital Instruments for accurate, reliable, and efficient monitoring solutions. Where Precision Meets Performance - HDI, your partner in measurement excellence.

Buy

In Stock

Manufacturer

New

API

Air Freight


Vocational vehicles Leasing

Drive Your Business Forward with Vocational Vehicle Leasing from CWB National Leasing Empowering Your Business with Flexible and Efficient Vehicle Solutions For businesses that rely on specialized vehicles for operations, whether in construction, transportation, or other vocational fields, having the right vehicles is crucial. Leasing vocational vehicles through Canadian Western Bank (CWB) National Leasing offers a strategic, flexible, and financially sound solution. Here’s how leasing vocational vehicles can accelerate your business’s efficiency and growth: 1. Rapid Vehicle Acquisition CWB National Leasing understands the importance of minimizing downtime in your business. They offer a streamlined leasing process with decisions typically made within 48 hours of your application, ensuring that your vocational vehicles are delivered and operational quickly, keeping your business moving smoothly. 2. Enhanced Financial Leverage Leasing vocational vehicles with CWB National Leasing increases your purchasing power. It allows you to allocate your financial resources effectively with manageable periodic payments instead of a hefty initial outlay. This approach frees up capital for other critical business investments. Moreover, you have the option to customize your vehicles with additional features or accessories for a minor increase in your payments. 3. Effective Cash Flow Management With smaller, spread-out lease payments, your vocational vehicles start contributing to your business’s revenue while they are being paid off. This balanced financial strategy helps maintain a healthy expense-to-revenue ratio, essential for business stability and growth. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable income patterns, ensuring that payments align with your financial situation. 5. Potential Tax Advantages Leasing can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the vehicles. It’s advisable to consult with a tax advisor to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease vocational vehicles through CWB National Leasing is more than just acquiring transportation; it’s a strategic decision that equips your business with necessary tools while maintaining financial agility. It ensures access to specialized vehicles essential for your operations, without the financial burden of a large upfront purchase. This approach paves the way for operational efficiency, growth, and increased profitability in your business.

Service

In Stock

Service

New

ISO


Upgrade of existing copper DCS network

Upgrading Your Lifeline: Nulux’s Proven Expertise in Copper DCS Network Enhancement Navigating the demands of modern-day industrial operations, particularly in the oil and gas sector, necessitates a robust, dependable, and high-performing Distributed Control System (DCS) network. It's more than an infrastructure; it's the operational lifeline that engineers and professionals in the industry lean on for seamless, uninterrupted, and efficient management of processes. But what happens when this lifeline requires enhancement to meet the escalating demands of your evolving operations? This is where Nulux Network Solutions steps in, fortifying your operational backbone with our unparalleled upgrade services. Elevating Your Operational Efficacy with Upgraded Copper DCS Networks Steeped in two decades of prolific experience, Nulux has pioneered numerous industrial projects in North America, specializing in elevating existing copper networks to meet the next level of operational demands, especially in DCS network upgrades. Our seasoned team, wielding a wealth of knowledge in installing, repairing, and upgrading a myriad of copper cabling systems, ensures your DCS network isn’t merely functional but is a testament to peak performance and reliability. The Nulux Advantage: Upgrading with Precision, Experience, and Technical Mastery When your copper DCS network signals a need for an upgrade, the Nulux team becomes your strategic ally, ensuring the transition is not just seamless but also significantly amplifies your network’s efficiency, reliability, and performance. Here's how we elevate your existing DCS networks: Holistic Network Assessment: Our experts delve deep into your existing network, identifying latent potential and areas necessitating upgrades to ensure that the enhanced network is inherently aligned with your operational demands. Strategic Upgrade Planning: Our plans are carved from a place of operational understanding, ensuring the upgrades augment not just the network’s technical performance but also enhance your process management, control, and data flow. Tailored Solutions: Our upgrade solutions are crafted, ensuring they are inherently in sync with your specific requirements, be it in voice, data, or video services, ensuring the upgraded DCS network is a perfect fit for your operational landscape. Uninterrupted Support: Beyond the upgrade, we stand beside you, offering consistent technical support, ensuring your enhanced network continues to operate at peak performance throughout its lifecycle. Why Copper Remains King: Sustaining Reliability and Performance Copper networks have steadfastly held their ground as a preferred choice for structured cabling due to their high-bandwidth transmission capability, long-term reliability, ease of installation, and cost-effectiveness. Your upgraded DCS network, enriched by the myriad benefits copper brings, becomes a solid, reliable, and efficient operational backbone, ensuring enhanced control, communication, and data management across your industrial processes. Aligning with Nulux: Upgrading Your Network, Upgrading Your Success Choosing Nulux as your copper DCS network upgrade partner translates to aligning with a team that understands networks beyond their technical framework. Our solutions are derived from an innate understanding of what businesses, especially in the oil and gas sector, require to maintain a competitive edge. Our legacy, crafted over 20 years, speaks of our commitment, expertise, and unwavering dedication to delivering high-quality network solutions. It’s not just about staying connected; it’s about ensuring that every pulse of your network propels your operations toward unbridled efficiency and success. Let’s explore how your existing copper DCS network can be transformed into a superior, high-performing asset, driving your operations to new heights of efficiency and control. Connect with Nulux Network Solutions today for a comprehensive consultation and pave the way towards an upgraded operational future.

Service

In Stock

Service

New

ISO


StimStixx HotStixx

HotStixx

Are you tired of dealing with stubborn paraffin buildup in your wells? Look no further than HotStixx by StimStixx Technologies. Our cutting-edge product utilizes a specially formulated solid acid stick to deliver heated acid vapor with pinpoint accuracy at the zone of interest, creating a powerful combination of pressure and heat downhole to eliminate paraffin buildup. HotStixx is engineered to tackle paraffin-related challenges head-on. The heated acid vapor, generated by our innovative technology, interacts with paraffin deposits, breaking them down effectively. The precise delivery of pressure and heat ensures maximum penetration, targeting the problematic areas with unparalleled accuracy. Witness the power of HotStixx as it removes paraffin buildup, revitalizing your well's performance. As the heated acid vapor does its job, it quickly vaporizes and becomes fully spent down-hole. Thanks to its high reactivity and relatively low volume, no residual contaminated effluent remains. This eliminates the need for post-treatment clean-up or disposal, reducing environmental risks and streamlining your operations. With HotStixx, you can confidently overcome paraffin challenges while minimizing downtime and maximizing efficiency. Say goodbye to costly and time-consuming maintenance associated with paraffin buildup. With StimStixx Technologies, you can focus on optimizing production and enhancing your well's performance. Join the ranks of forward-thinking industry leaders who trust HotStixx by StimStixx Technologies to eliminate paraffin buildup effectively and efficiently. Experience the power of precision pressure and heat, and unlock the true potential of your wells. The future of paraffin removal starts here.

Buy

In Stock

Product & Service

New

API

Air Freight


HDI 2250 Valve Position Indicator System

Valve Position Indicator

When it comes to monitoring valve positions on your manifold, trust the HDI 2250 Valve Position Indicator System to provide accurate and real-time information. Our system offers two reliable methods for identifying whether a valve is open or closed, ensuring clear visual indication and seamless electronic integration. Clear Visual Indication: With the HDI 2250, you can visually observe the position of the valve itself, providing a straightforward and cost-effective solution for monitoring valve status. The system allows for easy identification of open or closed valves, minimizing the risk of errors or misinterpretation. This clear visual indication ensures smooth operations and enhanced safety on your manifold. Electronic Integration for Real-Time Feedback: In addition to visual observation, the HDI 2250 offers electronic signaling capabilities. By connecting the valve position indicators to a console, you can receive real-time feedback on the status of each valve. This integration enables you to have a comprehensive overview of which valves are open or closed at any given time, improving operational efficiency and minimizing the potential for errors. Suitable for Various Valve Types: The HDI 2250 Valve Position Indicator System is designed to work with both manual gate valves and hydraulic actuated valves. This versatility allows you to monitor valve positions across different systems, ensuring consistent and reliable valve control throughout your operations. Seamless Integration and Display Options: Our system offers compatibility with local and remote visual displays, providing flexibility in how you monitor and track valve positions. Whether you prefer a centralized console or distributed displays, the HDI 2250 seamlessly integrates with your existing setup, providing you with the information you need, where you need it. Reliable and Cost-Effective: At HDI, we understand the importance of reliable and cost-effective solutions. The HDI 2250 Valve Position Indicator System offers both, providing accurate valve monitoring at an affordable price point. With Namur and proximity switch capabilities, you can customize the system to meet your specific requirements, ensuring optimal performance and ease of use. Trust Houston Digital Instruments: With decades of experience in the industry, Houston Digital Instruments has established itself as a leader in measurement and control solutions. Our commitment to safety, accuracy, and reliability shines through in every product we offer. The HDI 2250 Valve Position Indicator System is no exception, delivering exceptional value and performance to our customers. Contact our experienced team today to discuss your valve monitoring needs and discover how the HDI 2250 can enhance your operations. Trust Houston Digital Instruments for dependable valve position indication. Where Clarity Meets Control - HDI, your partner in precision measurement.

Buy

In Stock

Manufacturer

New

API

Air Freight


Seamless Global FX Transactions

Personal FInancial Services

Unlock Your Financial World with Dunbridge Financial's Personal Services Are you ready to take control of your finances and experience a world of seamless global transactions? Look no further than Dunbridge Financial! As the leading financial service provider, we are committed to delivering personal services that prioritize your convenience, security, and financial prosperity. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. When we say "no hidden fees," we mean it. Our commitment is to show you exactly what you'll be charged – what you see is what you get! Access our live exchange rates and enjoy the peace of mind that comes from knowing you're getting the most out of every transaction. Security as Our Top Priority Your trust is invaluable to us, and that's why security is at the core of everything we do. Rest assured, your funds and data are safe with Dunbridge. We've partnered with payment service providers who comply with ISO27001, ensuring that your client funds are managed with the highest level of safety and security. With Dunbridge, you can enjoy peace of mind like never before. Effortless Money Management Across Borders Managing your finances across international borders should be simple, and that's precisely what we offer at Dunbridge Financial. Our easy-to-use service enables you to send money quickly and efficiently to over 100 countries. Whether you need to manage investments in your home country while abroad, explore offshore investment opportunities, pay your mortgage for a vacation villa or investment property, or receive your pay and expenses in your preferred currency – we've got you covered. How It Works 1. Simplified Sending and Receiving Using Dunbridge Financial is as easy as 1-2-3. Choose where and to whom you want to send money, lock in your favorable exchange rate, and you're all set. It's hassle-free and designed to save you time and effort. 2. Personalized Foreign Investment Management Maximize your investment potential with Dunbridge Financial's tailored solutions. We assist you in managing your investments in your home country from abroad, explore lucrative offshore investment opportunities, and facilitate seamless mortgage payments in different countries. Embrace the freedom to pursue your financial goals worldwide. 3. Flexible Payment Solutions Work or travel abroad without worries. With Dunbridge, you can have your pay and expenses paid in your currency of choice, making your international experience truly rewarding. Discover Financial Freedom Today Join the countless individuals who have already experienced the benefits of Dunbridge Financial's personal services. Whether you're a seasoned investor looking for global opportunities or an individual navigating international payments, we are here to empower you with convenience, security, and savings. Take the first step towards unlocking your financial world today. Embrace Dunbridge Financial, where Live Rates, Security, and Ease of Use converge to provide you with an unparalleled personal financial experience. Your journey to financial freedom starts with us!

Service

Made to Order

Service

New

ISO

Air Freight


Heaters Leasing

Optimize Your Construction Site with Heater Leasing from CWB National Leasing Enhance Worksite Comfort and Efficiency with Tailored Leasing Solutions In the construction industry, maintaining a comfortable and safe working environment is crucial, especially in colder climates or during winter months. Construction heaters are essential for these conditions. Leasing construction heaters through Canadian Western Bank (CWB) National Leasing provides a flexible, cost-effective, and efficient solution for your business. Here’s how leasing construction heaters can benefit your construction projects: 1. Rapid Equipment Delivery CWB National Leasing prioritizes the efficiency of your operations. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your construction heaters can be delivered and operational swiftly, minimizing downtime and enhancing worksite productivity and comfort. 2. Increased Financial Flexibility Leasing construction heaters with CWB National Leasing boosts your financial agility. Choosing periodic payments over a large upfront purchase frees up capital for other vital aspects of your project. Additionally, the option to add extra features or accessories to your heaters for a small payment increase allows for customization to meet specific site needs. 3. Effective Cash Flow Management With smaller lease payments over the term, your construction heaters begin to contribute to your project’s efficiency while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is especially beneficial for construction projects with varying timelines and budgets, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing construction heaters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to explore how leasing can enhance your business’s tax position. Conclusion Choosing to lease construction heaters through CWB National Leasing is a strategic decision that equips your construction site with essential heating solutions while maintaining financial flexibility. It ensures access to high-quality heaters, vital for maintaining a safe and comfortable working environment, without the financial burden of a large upfront investment. This leasing approach enables enhanced site efficiency, worker comfort, and increased productivity, helping your construction projects to progress smoothly and efficiently.

Service

In Stock

Service

New

ISO


MS-52 EC Extraction Condensing Steam Turbine

Multistage Turbine

Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Wireless Communication Tower Construction

Soaring Above Communication Challenges: Nulux Network Solutions Pioneers in Wireless Tower Construction for the Oil and Gas Industry Exploration, extraction, and operational activities in the oil and gas industry are intrinsically bound to the formidable environments - remote locations, vast distances, and oftentimes, challenging terrains. Navigating through these physical barriers to establish a stable, secure, and scalable communication network necessitates innovative and robust solutions. This is where Nulux Network Solutions ascends, bridging the communication divide with unparalleled expertise in Wireless Communication Tower Construction. Pillars of Communication: Why Tower Construction Matters The landscape of the oil and gas sector demands the creation of a network that is not only extensive but also exceptionally reliable. Communication towers become the veritable backbone, linking disparate operations, ensuring data flow, and maintaining a coherence that is vital for smooth functionalities and decision-making processes. Constructing these towers, especially in the arduous terrains that characterize the oil and gas industry, requires a blend of engineering expertise, practical experience, and an acute understanding of wireless communication nuances. Nulux’s Distinction: A Synthesis of Experience and Innovation With an illustrious history in designing and implementing an array of wireless systems and infrastructures, Nulux has emerged as a leader in wireless tower construction and rigging, ensuring that the tapestry of communication across your operations, be it P2P or Multipoint networks, remains uninterrupted and secure. Adaptivity and Scalability: As your operations evolve, so does your communication network. Our towers are constructed with a forward-looking approach, ensuring they are capable of adapting to technological advancements and scalable to accommodate your expanding operational horizons. Reliability in Rigorous Environments: Our construction protocols and strategies are molded by our extensive experience in various terrains and environments, ensuring that the towers stand resilient in the face of geographical and meteorological challenges. A Mesh of Connectivity: Whether linking the executive decisions from central offices to the far-reaching extraction sites or facilitating data-driven operations across the entire network, our towers ensure that every node remains perpetually connected. Navigating Through P2P and Multipoint Networks Understanding and integrating varied network configurations such as P2P and Multipoint networks into our tower construction strategy, we ensure that the specific communicational and operational prerequisites of your business are met. End-to-End P2P Solutions: For secure, dedicated, and high-speed communication between two points, our P2P network solutions, enabled by strategically positioned towers, ensure that your data travels securely and swiftly. Expansive Multipoint Configurations: When the operational framework demands centralized communication with multiple nodes, our towers facilitate a sturdy and coherent multipoint communication network. Your Partner in Progress: Nulux Network Solutions As we stride into the future, where the fusion of technology and operations will become even more intrinsic, Nulux stands as your partner, ensuring that the wireless communication networks powering your operations are not just contemporaneous but also future-ready. Connect with us, and let’s architect a communication network that empowers, enhances, and ensures the seamless functionality of your operations in the oil and gas industry, traversing through the present and into the future.

Service

In Stock

Service

New

ISO


Cybersecurity Assessments

Cybersecurity

ALCiT in Mississauga

Meer informatie

Unlock Peace of Mind with ALCiT's Cybersecurity Assessment Are you ready to take charge of your digital security? Do You Cybersecure®? At ALCiT, we're not just asking questions – we're providing solutions that empower Small and Medium Enterprises (SMEs) to become and remain cybersecure. Step into the realm of confidence, armed with knowledge and actionable insights to safeguard your digital future. Curious to Learn and Improve? Your curiosity could be your greatest asset in the world of cybersecurity. ALCiT, a team of seasoned cybersecurity experts, has meticulously crafted an assessment that reveals where you stand and how you can elevate your security posture. Our quick yet comprehensive assessment is designed to uncover vulnerabilities and opportunities for improvement. Fast-Track to Cybersecurity Excellence At ALCiT, we understand that time is of the essence. Our assessment process is complemented by workshops and cutting-edge tools. This synergy enables us to swiftly extract essential information and deliver a detailed report that not only benchmarks your current status against peers but also outlines short- and long-term actions to enhance your cybersecurity resilience. Three Scenarios, One Solution: Cybersecurity Assessment Confidence Confirmation: Think you've covered all your bases? Don't leave it to chance. Our Cybersecurity Assessment acts as your second opinion, confirming your security efforts and offering suggestions for further strengthening. Navigating the Unknown: If issues loom and you're unsure where to begin, our Cybersecurity Assessment is your guiding light. Gain actionable insights, pinpoint vulnerabilities, and receive a roadmap for securing your digital realm. Preventing the Next Headline: News of the latest hack might send shivers down your spine. Don't wait for disaster to strike. Enroll in our 'Become Cybersecure Accelerator,' a comprehensive package that includes our Cybersecurity Assessment and immediate remediation. With us by your side, you'll be equipped to thwart potential threats before they materialize. Secure Today, Thrive Tomorrow Your journey to becoming cybersecure starts now. Take that crucial step towards safeguarding your organization, your data, and your future. Choose ALCiT as your cybersecurity partner, and let us illuminate the path to a more secure digital landscape.

Service

Made to Order

Service

New

ISO


SP TR-SCSSSV 2-3/8 inch

SCSSSV - Model SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Truck Oil Absorbent Spill Kit

Oil Absorbent Spill Kit

OilHungry in Stoney Creek

Meer informatie

The spill kit contains, 10 Pads 8” x 19” 2 Sorbent Socks 3” x 4 ft 1 Pair Nitrile Gloves 2 Disposal Bags Pads 8” x 19” Deploy these absorbent pads on liquid spills, especially those involving oil-based substances. Their dimensions and absorbent properties make them effective in quickly containing and cleaning up spills, contributing to a cleaner and safer environment. Whether as part of an emergency response kit or for routine maintenance, these absorbent pads provide a practical solution for liquid cleanup needs. The absorbent pads come in a pack of 10, with each pad measuring 8 inches by 19 inches. This size provides practical coverage for various applications. 2 Sorbent Socks 3” x 4 ft Whether as part of an emergency kit or for routine maintenance, these Sorbent Socks offer a practical solution for managing liquid spills. Quantity: The package contains 2 Sorbent Socks, offering a practical quantity for spill response. Dimensions: Each sock is 3 inches in diameter and 4 feet in length, providing versatility in deployment. Material: Made from sorbent materials designed to effectively contain and absorb liquid spills. Hydrophobic Nature: Repels water, focusing on absorbing oil-based substances. Adaptability: Mouldable model allows the socks to conform to different surfaces and shapes. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 2 Disposal Bags Includes 2 Disposal Bags, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal Bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met spills. Truck Oil Absorbent Spill Kit Used in industrial settings, transportation and areas dealing with hazardous materials.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Tubing Retrievable SCSSSV 3-1/2 inch SP

TR-SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Cameras Leasing

Enhance Your Visual Capabilities with Camera Equipment Leasing from CWB National Leasing Capturing Success with Advanced and Flexible Photographic Solutions For businesses in the fields of photography, filmmaking, marketing, or any industry requiring high-quality visual content, state-of-the-art camera equipment is essential. Leasing camera equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and intelligent solution for businesses seeking to elevate their visual production quality. Here’s how leasing camera equipment can benefit your business: 1. Rapid Access to Professional Camera Gear Understanding the dynamic nature of visual content creation, CWB National Leasing offers a swift leasing process. Decisions are typically made within 48 hours of application, ensuring that your camera equipment can be delivered and operational quickly. This prompt service allows you to stay ahead in the fast-paced world of digital content. 2. Increased Financial Flexibility Leasing camera equipment with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of a substantial initial purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your camera equipment for a small payment increase enables customization to meet specific project needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your camera equipment starts contributing to your business’s productivity while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal projects, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing camera equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease camera equipment through CWB National Leasing is a strategic decision that provides your business with the latest in photographic technology while maintaining financial agility. It ensures access to top-tier camera gear, vital for producing high-quality visual content, without the financial burden of a large upfront investment. This leasing approach enables enhanced creative capabilities, improved content quality, and increased competitiveness in the visual media market.

Service

In Stock

Service

New

ISO


Flat deck trailers Leasing

Maximize Your Business Flexibility with Flat Deck Trailer Leasing from CWB National Leasing Enhancing Your Transportation Capabilities with Smart Leasing Solutions For businesses that require versatile transportation solutions, flat deck trailers are invaluable. They offer the flexibility to transport a wide range of goods, from construction materials to heavy equipment. Leasing flat deck trailers through Canadian Western Bank (CWB) National Leasing provides a strategic, adaptable, and financially beneficial option for your business. Here’s how leasing flat deck trailers can support your operational needs: 1. Swift Equipment Access CWB National Leasing recognizes the importance of minimizing downtime in your operations. Their leasing process is designed for speed, with decisions on applications typically made within 48 hours. This efficiency means your flat deck trailers can be delivered and ready for use quickly, ensuring your transportation and logistics operations continue seamlessly. 2. Enhanced Financial Flexibility Leasing flat deck trailers with CWB National Leasing boosts your buying power. Opting for periodic payments instead of a large upfront purchase helps free up cash for other essential business activities. Additionally, the option to add extra features or accessories to your trailers for a small payment increase allows for customization according to your specific business requirements. 3. Effective Cash Flow Management With smaller lease payments over the term, your flat deck trailers begin to contribute to your business’s revenue while still being paid off. This approach helps in maintaining a healthy balance between expenses and income, which is crucial for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly advantageous for businesses with fluctuating or seasonal income, ensuring that payments are manageable and suit your financial flow. 5. Potential Tax Advantages Leasing flat deck trailers can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease flat deck trailers through CWB National Leasing is a strategic move that equips your business with essential transportation resources while maintaining financial agility. It ensures access to versatile trailers necessary for a wide range of transportation needs without the financial strain of a large initial investment. This leasing approach enables enhanced operational efficiency, business expansion, and increased profitability in your diverse business ventures.

Service

In Stock

Service

New

ISO


Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch

WR-SCSSSV Bigbore 4.5 inch

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Safety Valve for Water Injectors 5.71 inch

WI Valve 5.71

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


WI Valve for injection wells (3.39 inch)

3.39 inch safety valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Professional Hand Controller

ROV Controller

Introducing Poseidon Robotics' Professional Hand Controller: Elevating ROV Operations to New Heights At Poseidon Robotics, we understand the crucial role that precision and control play in the success of your subsea missions. That's why we are thrilled to present our Professional Hand Controller – the ultimate tool for commanding your underwater operations with unparalleled accuracy and ease. A Perfect Match for the Lanai ROV The Professional Hand Controller comes as standard equipment with our highly-acclaimed Lanai ROV. Born from years of research, development, and feedback from industry professionals, the Lanai ROV is a testament to our commitment to excellence. And now, it is accompanied by a hand controller that is as exceptional as the ROV itself. Customization Options to Suit Your Style We believe that your tools should not only perform flawlessly but should also reflect your personality and style. The Professional Hand Controller comes in an elegant black anodized finish as standard, exuding a sense of professionalism and reliability. However, we understand that individuality matters, which is why we offer the option to customize the hand controller in a blue anodized finish or a variety of colors. Ergonomic Design for Enhanced Comfort Poseidon Robotics places great emphasis on user experience. The Professional Hand Controller's ergonomic design ensures that your hands will remain comfortable even during extended periods of operation. Its intuitive layout and tactile controls make commanding the Lanai ROV a breeze, allowing you to focus on your mission without any distractions. Seamless Integration and Intuitive Control When it comes to subsea operations, every second counts. The Professional Hand Controller is designed to integrate seamlessly with the Lanai ROV, ensuring a hassle-free setup process. Its responsive and intuitive controls provide you with precise command over the ROV's movements, making it feel like an extension of your own arm. A Trusted Companion for Professional Explorers Poseidon Robotics has earned the trust of subsea professionals worldwide through our unwavering commitment to quality and innovation. The Professional Hand Controller is no exception – built with durability and reliability in mind, it is designed to withstand the harsh conditions of the underwater environment, providing you with a trusted companion on all your missions. Unlock New Possibilities with Poseidon Robotics As pioneers in subsea robotics, we are dedicated to equipping you with the most advanced tools for exploration and discovery. The Professional Hand Controller, paired with the Lanai ROV, unlocks new possibilities in the field of underwater operations. Whether you are conducting scientific research, performing intricate inspections, or engaging in search and rescue missions, our hand controller enhances your capabilities and brings you closer to your objectives. Choose Precision, Choose Poseidon Robotics Take your subsea operations to new heights with Poseidon Robotics' Professional Hand Controller. Embrace precision, embrace control, and embark on a journey of exploration and achievement like never before. Elevate your ROV experience and choose Poseidon Robotics as your trusted partner in subsea robotics. Get Your Professional Hand Controller Today Contact Poseidon Robotics now to learn more about our Professional Hand Controller and how it can revolutionize your underwater missions. Let us be your guide as you navigate the depths and uncover the wonders that lie beneath the surface. Together, we will redefine what is possible in subsea exploration.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Modular Telemetry System

Subsea Telemetry MUX

Unlock the Power of Deep-Water Connectivity with Poseidon's Modular Telemetry System Discover the Versatile Solution for Subsea Communications Diving into the depths of the ocean requires cutting-edge technology that can handle the challenges of the underwater world. Poseidon Robotics proudly presents the Modular Telemetry System (MTS) - a game-changing solution that will redefine the way you communicate with your remote underwater systems. The Bottleneck Breaker Trying to fit a bottle into a square space? Say goodbye to those limitations with the Poseidon MTS. Our rectangular design revolutionizes subsea telemetry, offering a multitude of Ethernet, video, and serial connections for deep-water ROVs, drills, and other systems. Tested to exceed 4,000m water depth, this system is built to perform even in the harshest subsea environments. Simplicity in Retrofitting Upgrading older ROVs and expanding their capabilities has never been easier. The MTS package provides everything you need to make use of a spare fiber connection and A/C or high voltage power. Retrofitting older ROVs with multiple sensors on a tooling skid or integrating custom equipment like geotechnical platforms has never been more streamlined. Compact Yet Powerful The Poseidon MTS boasts an impressive feature set while maintaining a compact size. Measuring at less than 2 feet long and only 5.5 inches wide, it's about the height of a coffee mug. But don't be fooled by its size; it packs a punch with up to 18 different accessory connections and half a kilowatt of onboard power, all rated to a remarkable 4,000 meters depth. Engineering Excellence Using modern 7075 Aluminum alloy and employing advanced FEA modeling and testing, we've ensured the MTS is built to withstand the most challenging subsea conditions. Its robust construction guarantees durability and reliability, offering peace of mind during your underwater missions. Customization and Expansion The MTS's versatility knows no bounds. It replaces larger telemetry bottles, offering ample space for multiple pieces of equipment. Whether you need a full telemetry system with instrument power or wish to expand your ROV skids, the MTS has got you covered. Unmatched Connectivity The MTS Subsea Mux is the heart of the system, featuring: • Depth Rating: Dive confidently up to 4,000 meters, exploring new depths with ease. • Multiple Connectivity: Enjoy 16x serial ports, 2x PAL/NTSC video, and 1x Ethernet, providing you with a wide range of communication options. • Onboard Power: Boasting 500W of onboard regulated 26/12VDC power, it ensures your remote sensors receive the power they need. Seamless Surface Integration The Surface Rack complements the MTS with its 19-inch Rack 2U chassis and RJ45 outputs, delivering low latency connections for a smooth surface experience. Powerful Transformation with MTSX If you require a full telemetry system with instrument power, our compact MTSX transformer assembly is the perfect addition. Featuring an integrated umbilical gland and oil-filled 3kW transformer with 3kV input, it provides unparalleled performance. Explore with Confidence Poseidon Robotics empowers you to explore the depths with confidence. With the Modular Telemetry System by your side, you have the keys to unlocking new subsea possibilities. Learn More Today To discover how the Poseidon Modular Telemetry System can elevate your subsea operations, reach out to us and join the ranks of industry leaders who trust the future of deep-water communications with Poseidon Robotics. Dive Deeper, Go Farther.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Cap Lamp All-in-One Toolkit

Cap Lamp Complete Kit

Provix in New Lowell

Meer informatie

Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


External Dimple Connector for Coiled Tubing

EDC Coiled Tubing Tool

Introducing the Revolutionary EDC (External Dimple Connector) from Marlin Oil Tools: The Essential Link for Coiled Tubing Applications in the Oil and Gas Industry Marlin Oil Tools proudly presents our state-of-the-art EDC (External Dimple Connector), a groundbreaking solution designed to seamlessly integrate the smooth lower end of coiled tubing (CT) with any requisite downhole tool for efficient well intervention operations. The EDC stands out in the oil and gas sector for its innovative design and unparalleled reliability, making it a must-have for your well intervention toolkit. Key Features of the EDC (External Dimple Connector): Seamless Integration: The EDC provides a flawless connection between the smooth-walled end of the CT and the threaded interface of downhole tools, ensuring a secure and efficient link for well intervention jobs. Advanced Connection Mechanism: Equipped with a unique holes matrix in the upper housing, the EDC utilizes set screws installed in precision-pressed dimples, offering a robust and reliable connection without compromising the integrity of the coiled tubing. Threaded Lower Part: The connector's lower portion features a meticulously designed thread for attaching any downhole tool, facilitating a versatile and adaptable solution for various well intervention needs. High-Performance Sealing: Installation of the EDC is enhanced with two O-rings made from the durable FKM 90 material, providing a high-integrity seal between the internal space of the connector and the annulus, ensuring operational safety and efficiency. Effortless Installation: The EDC can be effortlessly installed using a dimple tool, capable of mechanical or hydraulic pressing, simplifying the assembly process and minimizing downtime during critical operations. At Marlin Oil Tools, we understand the complexities and challenges of well intervention in the oil and gas industry. Our EDC (External Dimple Connector) is designed to address these challenges, offering a reliable, efficient, and high-quality connection solution for coiled tubing operations. Whether you are conducting routine maintenance, stimulation, or any other well intervention job, the EDC ensures a seamless, secure, and effective operation. Why Choose Marlin Oil Tools' EDC? Unmatched Reliability: Engineered for durability and performance, the EDC withstands the harsh conditions of downhole operations, ensuring reliability when it matters most. Versatility: Compatible with a wide range of downhole tools, the EDC offers unparalleled flexibility for your well intervention needs. Quality Assurance: At Marlin Oil Tools, quality is at the forefront of everything we do. The EDC is manufactured to the highest industry standards, ensuring peak performance and safety. Elevate your coiled tubing operations with the EDC (External Dimple Connector) from Marlin Oil Tools. Contact us today to learn more about how our innovative solutions can enhance your well intervention strategies and drive operational success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Technical Feasibility Study

Software Development

Eleks in Toronto

Meer informatie

Unlocking Technological Opportunities with ELEKS' Technical Feasibility Study In today's fast-paced business landscape, staying ahead means embracing innovation. But before you invest your resources, it's essential to understand the potential of emerging technologies. At ELEKS, we're your partners in exploring the latest tech trends and uncovering their possibilities for your business. Our Technical Feasibility Study, backed by our award-winning R&D team, empowers you to make informed decisions that drive innovation and success. Empowering Innovation: Explore Emerging Technologies: Navigating the vast landscape of emerging technologies can be overwhelming. We're here to guide you. Our experts delve into the realms of blockchain, IoT, AR/VR, RPA, and AI to evaluate their potential impact within your unique business environment. Solve Problems Innovatively: With reduced financial risks, you can adopt a more innovative problem-solving approach. Our seasoned engineers collaborate closely with your project team throughout the feasibility study, tackling even the most complex challenges head-on. Validate Ideas Before Investment: Mitigate risks by testing uncharted solutions to your most intricate business problems before making significant investments. Our Technical Feasibility Study minimizes technological uncertainties, giving you and your stakeholders the confidence to invest in solutions that truly work. Craft a Vision for the Future: ELEKS assists you in evaluating the alignment of emerging technologies with your current market situation and potential for investment. If a technology isn't immediately viable, we help you strategize for the right time, ensuring a solid use-case or resource-saving potential. Gain a Competitive Edge: Identify untapped market opportunities and develop solutions grounded in real-world demands using cutting-edge technology. Our expertise empowers you to create a unique selling proposition, elevating your existing products and introducing new high-tech solutions to gain a competitive advantage. Navigating the Path to Technological Success: Structured Feasibility Studies: 1. Initial Research: Our R&D team conducts exhaustive research to understand your business challenges, defining clear goals for your solution. We then assemble a team equipped to deliver on those goals. 2. Hypothesizing and Testing: With expert insights, we develop problem-solving hypotheses and rigorously test them to define the optimal technological approach. 3. Technology Selection: We identify software stacks and hardware components that align with your business requirements. Our deep knowledge allows us to assess the advantages and disadvantages of innovative technologies. 4. Deployment and Next Steps: Our experts guide you through deployment, ensuring smooth technology integration and uptake. Our Centers of Excellence provide dedicated support, including project management, BA, QA, and customer support, tailored to your feasibility study. ELEKS: Your Gateway to Technological Vision: With ELEKS' Technical Feasibility Study, you're not just investing; you're innovating with confidence. Our unwavering commitment to technology exploration and excellence positions us as your trusted partner in shaping a future defined by cutting-edge solutions. Step into the realm of innovation with ELEKS and witness the transformation of your ideas into tangible success. Embrace the future today – because your technological vision is worth it.

Service

Made to Order

Service

New

ISO


WI Water Injection Valve 1.75 inch

Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Construction Verticals

Cybersecurity

ALCiT in Mississauga

Meer informatie

Revolutionize Your Construction Workflow with ALCiT's Vertical Solutions In the dynamic world of construction, a traditional office environment just won't cut it. Your team is always on the move, navigating worksites, and thriving in the face of challenges. At ALCiT, we've crafted tailored solutions to ensure that every day is a productive day, whether it's on the road or on-site. Welcome to the future of construction efficiency. Crafting Efficiency Wherever You Roam We understand that the construction industry thrives outside the traditional office. Your solution demands versatility and durability. ALCiT introduces a groundbreaking solution – a ruggedized tablet that's not just for the worksite, but also transforms into a full-fledged office experience when tethered to a docking station. Seamlessly transition between field and office without missing a beat. Unleash Collaboration Beyond Boundaries With teams scattered across locations, staying connected and collaborating is paramount. ALCiT's online collaboration tools empower your workforce to seamlessly share ideas, updates, and vital information, fostering teamwork even when miles apart. No more barriers – just smooth communication and collective progress. Adaptability in Every Scenario The construction industry is synonymous with unpredictability. That's why ALCiT's tools are engineered to adapt to any situation. Our solutions work online and offline, ensuring that your team remains productive and efficient, regardless of internet availability. Be ready to tackle any challenge, no matter what the day brings. Temporary Offices, Perpetual Efficiency Project sites are your canvas, and ALCiT is here to help you paint it with efficiency. Our expertise extends beyond devices and software. We create temporary offices at your worksites, facilitating seamless connectivity and productivity even in the most challenging environments. Secure Today, Build Tomorrow ALCiT's vertical solutions for the construction industry are more than just tools – they're your key to unparalleled efficiency, connectivity, and progress. Embrace a future where your team thrives, where collaboration knows no boundaries, and where adaptability reigns supreme. Embrace the future of construction efficiency with ALCiT's solutions.

Service

Made to Order

Service

New

ISO


QUP Retrievable Bridge Plug

QUP Plug

Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more!

Buy

In Stock

Product

New

API

Sea Freight


Storm Choke WI Valve 3.97 inch

Water Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Partnered with Logitech

Cybersecurity

ALCiT in Mississauga

Meer informatie

Revolutionize Your Meetings with ALCiT's Logitech Partnership Online meetings – we've all been there. The constant echo of 'Can you hear me?' and the perpetual mute button fiasco. Say goodbye to these frustrating hurdles, as ALCiT proudly partners with Logitech to bring you seamless Meeting Room Solutions that redefine how you connect, collaborate, and communicate. Experience Meetings Without Hassles At ALCiT, we understand that meetings should be about progress, not problems. That's why our partnership with Logitech is a game-changer. Whether it's a huddle room or a 30-seat conference, our solutions ensure that every meeting is a seamless interaction, allowing you to focus on the agenda, not the technology. Logitech: The Prestigious Tech Pioneer Since its inception in 1981, Logitech has stood as a beacon of innovation and reliability. With products spanning across the globe, Logitech's technology excels at uniting people regardless of distance. Now, ALCiT brings this excellence to your meeting spaces, transforming collaboration dynamics. Unveiling the Magic of Logitech Solutions MeetUp: Compact Brilliance: Small space, big ideas. MeetUp packs impressive features into a compact solution, catering to intimate conferences with crystal-clear audio and sharp video. Rally Camera: Ultra-HD Excellence: Experience brilliance like never before. Rally Camera delivers Ultra-HD imaging, vibrant colors, and optical accuracy that redefine video conferencing quality. Logitech Tap: Touch of Convenience: Empower your workspace with sleek touch control. Tap brings ease to online meetings, with silent operation and an always-ready motion sensor. H820e Headset: Noise-Canceling Revolution: Transform your conference experience with these noise-canceling headsets. With up to 10 hours of talk time and a wide range, your conversations become crystal-clear dialogues. Empower Collaboration, Erase Setup Frustrations ALCiT and Logitech share a common goal – to enhance collaboration and streamline communication. Our Meeting Room Solutions reduce setup complexities and save you precious time. The best part? These solutions seamlessly integrate with your existing services, ensuring a smooth transition. Seamless Meetings: A Click Away ALCiT's partnership with Logitech redefines meetings – from frustrating fumbles to seamless experiences.

Service

Made to Order

Service

New

ISO


Equalizing Sub-Assembly

Downhole Tools

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


2.62 inch Water Injection Valve WI

Water Injection Valve 2.62

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Stickwelder 162 D

SMAW Welder

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Cyber Security Services

Software Development

Eleks in Toronto

Meer informatie

ELEKS Cyber Security Services: Safeguarding Your Digital Future In today's digital landscape, security is not a luxury – it's a necessity. At ELEKS, we're your partners in fortifying your digital infrastructure against the evolving threats that lurk in the shadows. Our Cyber Security Services are your shield against cyber adversaries, helping you minimize damage, mitigate risks, and keep your business safe in the face of the ever-changing threat landscape. Empowering Your Digital Defense: Streamline Compliance Efforts: Navigating the complex world of industry standards and regulations is a daunting task. Our experts offer unbiased evaluations of your processes, products, and systems. By implementing security controls aligned with industry standards, you'll ensure business resilience and alleviate the compliance burden. Prioritize Attack Survivability: Prevention is the key to security success. Our services identify and rectify security issues before product launch, ensuring your products are secure by design and by default. Embedding security controls in the early stages of development safeguards against penalties, risks, and reputational damage. Assure Control Effectiveness: ELEKS' security services go beyond implementation – we verify control effectiveness in complex environments, intricate IT infrastructures, and mission-critical applications. With our expertise, maintain operations and deliver your core business vision without compromising security. Enhance Corporate Security Posture: Our structured process evaluates the risks associated with your operations, identifying vulnerabilities and assessing risks to develop essential steps for mitigation. We empower your business with a robust security strategy, enabling you to combat threats proactively. Craft a Resilient Security Strategy: At the heart of our approach lies a commitment to understanding the root causes of your risks. Our security team develops comprehensive remediation plans that drive long-term strategic improvements, prioritizing lasting solutions over short-term fixes. Unveiling the Power of ELEKS Security Services: Discover, Assess, and Enhance: 1. Discovery: Gain a clear understanding of your project's scope and resource requirements to maximize efficiency. 2. Assessment & Testing: Thoroughly evaluate processes, products, or systems to pinpoint gaps and non-conformities. 3. Analysis: Uncover threats, needs, and opportunities to drive innovative security solutions. 4. Reporting: Tailor a technological solution to address vulnerabilities, backed by a comprehensive action plan. 5. Implementation: Work collaboratively to implement new solutions, ensuring seamless integration and protection. 6. Managed Services: Receive ongoing support and recommendations to adapt to evolving threats and enhance efficiency. ELEKS Security Services: Strengthening Your Defenses: 1. Security Testing Services: Comprehensive testing services to uncover vulnerabilities, including penetration testing for web, mobile, desktop, and infrastructure. Adherence to recognized standards ensures comprehensive coverage. 2. Compliance Automation Platform: Empower regulated sectors to consolidate and automate compliance efforts, reducing costs and ensuring regulatory compliance across your entire value chain. Why Choose ELEKS' Cyber Security Services? 1. Expertise: With a team of certified experts, we offer decades of experience in building secure solutions. 2. Proactive Approach: Our strategies are designed to prevent breaches and protect you from emerging threats. 3. Compliance Mastery: Navigate industry regulations confidently with our compliance-focused services. 4. Holistic Solutions: From discovery to implementation, our comprehensive approach addresses your unique security needs. Elevate Your Security with ELEKS: In the digital battlefield, trust ELEKS to be your guardian against cyber threats. Our Cyber Security Services are not just about mitigating risks – they're about empowering your business to thrive securely. Join hands with ELEKS and safeguard your digital future. Your security is our priority – let's secure it together.

Service

Made to Order

Service

New

ISO


HDI 2200 Choke Position Indicator System

Choke Position Indicator

Houston Digital Instruments (HDI) proudly presents the HDI 2200 Choke Position Indicator System, a state-of-the-art solution for monitoring choke positions with unrivaled accuracy and reliability. Designed specifically for the oil and gas industry, this intrinsically safe, certified electronic choke position indicator will revolutionize your operations and provide peace of mind. Unparalleled Precision and Adaptability: The HDI 2200 offers precise monitoring of choke positions in 1% increments, allowing you to maintain optimal control over your operations. Compatible with a wide range of chokes commonly found in the industry, including linear, rotary, and retractable potentiometers, this system adapts seamlessly to your specific requirements. Say goodbye to the complexities and limitations of traditional air line position indicators—HDI 2200 eliminates the need for air lines, streamlining your monitoring process and enhancing overall efficiency. Reliability That Matters: Safety and reliability are at the forefront of our design principles. The HDI 2200 Choke Position Indicator System carries important certifications, including CSA Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D, ensuring compliance with stringent industry standards. With HDI, you can trust that our gauges are built to withstand the most demanding environments, providing accurate readings and consistent performance even in challenging conditions. Easy Maintenance and User-Friendly Interface: We understand the importance of simplicity and ease of use. The HDI 2200 features a solid-state display with an analog bar graph and a divided scale, making it easy to interpret choke positions at a glance. The system is designed to be field-repairable, minimizing downtime and reducing maintenance costs. A low battery indicator ensures you're always aware of the system's power status, providing peace of mind during critical operations. Calibration is a breeze with the system's simple interface, enabling quick adjustments to maintain accuracy. Tailored to Your Needs: At HDI, we believe in customization. The HDI 2200 Choke Position Indicator System offers a range of configuration options to suit your specific requirements. Choose from 4-20mA output (with an additional barrier), 4-20mA input (non-certified option), externally powered with 12VDC or 24VDC (non-certified option), or backlight options (12VDC or 24VDC, non-certified). This flexibility ensures seamless integration with your existing systems and enhances the overall functionality of your operations. Experience HDI Quality: With HDI, you can trust that you're partnering with a reliable and innovative provider of measurement solutions. Our gauges are synonymous with safety, accuracy, reliability, and low maintenance. The HDI 2200 Choke Position Indicator System is no exception. Join countless satisfied customers who have experienced the HDI difference firsthand. Elevate Your Monitoring Capabilities: Upgrade your choke position monitoring to new levels of precision and reliability with the HDI 2200 Choke Position Indicator System. Enjoy effortless adaptability, easy maintenance, and a user-friendly interface that simplifies your operations. Discover why HDI is the trusted choice for the oil and gas industry. Contact Houston Digital Instruments today and experience the power of the HDI 2200 Choke Position Indicator System. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Buy

In Stock

Manufacturer

New

API

Air Freight


FXE Wireline Retrievable SCSSSV 5 inch

WR-SCSSSV FXE 5

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Mixers Leasing

Streamline Your Operations with Mixer Leasing from CWB National Leasing Enhancing Efficiency and Financial Flexibility in Construction In the realm of construction and manufacturing, mixers play a pivotal role in maintaining efficiency and productivity. Opting to lease mixers through Canadian Western Bank (CWB) National Leasing presents a strategic and financially savvy approach for businesses seeking to upgrade or expand their equipment capabilities. Here's how leasing mixers can benefit your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in your operations. They offer a swift leasing process, typically approving applications and notifying your equipment dealer about the payment within 48 hours. This efficiency ensures that your mixers are delivered and operational promptly, keeping your projects moving without delay. 2. Enhanced Purchasing Power Leasing mixers with CWB National Leasing boosts your financial flexibility. You can avoid a large upfront purchase and instead enjoy the benefits of manageable periodic payments. This frees up capital for other vital aspects of your business. Additionally, you have the option to enhance your mixers with extra features or accessories for a small increase in your payments. 3. Balanced Cash Flow Management Smaller, spread-out lease payments mean that your mixers can start contributing to your business’s revenue even as they are being paid off. This approach helps maintain a healthy expense-to-revenue ratio, which is essential for financial stability and growth. 4. Flexible Payment Options CWB National Leasing offers adaptable payment plans, including seasonal, semi-annual, or annual options, to suit your business’s cash flow. This flexibility is especially beneficial for businesses with variable income streams, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing mixers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It's advisable to consult with a tax advisor to understand how leasing can enhance your business’s tax position. Conclusion Choosing to lease mixers through CWB National Leasing is more than just an equipment acquisition; it’s a smart business decision that empowers your operations with essential tools while preserving financial flexibility. It enables you to utilize advanced mixers for your projects while managing your finances effectively, paving the way for enhanced operational efficiency, growth, and profitability in the competitive world of construction and manufacturing.

Service

In Stock

Service

New

ISO


Industrial Ethernet

Industrial Ethernet Solutions by Nulux Network Solutions: Unifying Robust Connectivity in the Oil and Gas Sector Navigating the robust yet intricate world of the oil and gas industry necessitates a network that can not merely withstand the test of operational rigours but can effortlessly blend reliability with performance. At the heart of ensuring such seamless communications and data transfer within your intricate operational frameworks rests Industrial Ethernet, and at the helm of delivering exemplary Ethernet solutions is Nulux Network Solutions. A Beacon in the Industrial Networking Landscape: Nulux Network Solutions In a sector that doesn’t afford the luxury of pauses, your network must not merely be a conduit for communication, but a fortress of secure, unwavering, and efficient data transfers. For over two decades, Nulux has been a pivotal part of countless industrial projects across North America, offering a spectrum of networking solutions, with a notable proficiency in Industrial Ethernet solutions, among others. Our seasoned team, embodying a meticulous and perfectionist ethos, not only installs, maintains, and troubleshoots copper cabling systems including ethernet but elevates the quality of workmanship, sculpting solutions that are resilient, reliable, and tailor-fitted to your unique operational needs. The Quintessence of Copper in Your Industrial Ethernet Framework Ensuring that your business thrives in the dynamic arena of energy extraction and refinement, Nulux provides a well-rounded, comprehensive copper network design, maintenance, and upgrade solution, harnessing the intrinsic virtues of copper: Unbridled Data Transmission: Safeguarding data transfers up to 10 Gbps, ensuring your operations are never bottlenecked by data transfer delays. Unwavering Reliability: Guaranteeing a network that stands undeterred amidst operational demands. Affordability & Ease: Merging cost-effectiveness with simple installation and termination procedures. Nulux's Industrial Ethernet: Solidifying Your Operational Backbone As technology continues to weave itself into every fabric of the industry, industrial Ethernet by Nulux stands as a testament to a network solution that is flexible yet fiercely durable and reliable. Our service ambit encapsulates: Pioneering Network Designs: That dovetail impeccably with your existing and prospective operational frameworks. Constant Network Evolution: Ensuring your networks are perpetually contemporaneous, mitigating obsolescence. Bespoke Solutions: Tailoring our services to precisely cater to your unique data, voice, and video service requirements. Your Operations, Backed by Nulux’s Industrial Ethernet Expertise In a sector where every byte of data, every communication, and every connection can be pivotal, Nulux ensures that your operations are perpetually enveloped in a cocoon of sturdy, reliable, and efficient network infrastructure. Our Industrial Ethernet solutions, fortified by the proven reliability of structured cabling and our unwavering commitment to impeccable service delivery, stand as a silent, steadfast guardian of your operations, facilitating operational continuity and data integrity. Allow Nulux Network Solutions to become the architects of your network infrastructure, ensuring that while you navigate through the operational complexities of the oil and gas sector, your data travels through a network that is as resilient, reliable, and robust as your operations demand. Contact Nulux Network Solutions today, and let’s sculpt a future where your network is the least of your concerns, ensuring your focus remains undeterred – on operational excellence and industry leadership.

Service

In Stock

Service

New

ISO


CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them.

Service

In Stock

Service

New

API

Land Freight