Ballycatter.nl. Industriële marktplaats - Vind leveranciers van apparatuur en services
Secure Login System PHP
Secure Login System PHP
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling
  • Customer Service
  • Partners

Geen overeenkomsten, maar we zijn hier om te helpen; Zoekservice


Bedrijfstype

Beschikbaarheid

Kwaliteitsgarantie

Staat

Transactie Type

FRN 3-1/2 inch Subsurface Safety Valve WR

WR-SCSSSV FRN

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Stimstixx 2.5 inch MatrixStixx Thru-Tubing

MatrixStixx 2.5 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Acid Treatments! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! Our Thru-Tubing Acid Stimulation product is designed to deliver outstanding results with minimal hassle. Deploying this innovative solution via electric wireline has never been easier. Whether you choose the HCL or HCL/HF acid blend, our product is formulated to provide exceptional performance tailored to your needs. How does it work? Our secret lies in the specially formulated solid acid stick. Whether it's delivered via slickline, wireline, coil tubing, or tractor, it releases heated acid vapor precisely at the zone of interest. This targeted approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the acid vapor. And here's the best part: the acid vaporizes and becomes fully spent down-hole, resulting in no contaminated effluent. Say goodbye to spills, post-treatment clean-up, and disposal headaches! The benefits of choosing Thru-Tubing Acid Stimulation are abundant. Firstly, you contribute to reducing CO2 emissions, making a positive impact on the environment. With reduced downtime, you can keep operations running smoothly, saving valuable time and money. Implementation is simple, thanks to the user-friendly design and efficient deployment method. The pinpoint accuracy of our solution ensures increased precision, leading to enhanced results. And because it's fast-acting, you'll see the benefits sooner than ever before. But the advantages don't stop there. Thru-Tubing Acid Stimulation also helps lower manpower, rig, and equipment costs. With reduced corrosion and wear, your equipment will last longer, minimizing maintenance and replacement expenses. Furthermore, no surface spillage means a safer working environment and reduced exposure to hazardous materials for your team. Join the ranks of forward-thinking companies that are embracing Thru-Tubing Acid Stimulation by StimStixx Technologies. Experience the power of innovation, efficiency, and environmental consciousness. Get in touch with us today and take your acid treatments to new heights!

Buy

In Stock

Product & Service

New

API

Air Freight


Multi-Process 5001 All-in-One Welder

Welding Machine

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future.

Service

In Stock

Service

New

API

Land Freight


MS-52 EC Extraction Condensing Steam Turbine

Multistage Turbine

Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


MS-32 Multistage Steam Turbine

Back Pressure Turbine

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Valve and Prong Type Equalizing Sub-Assembly

Downhole Tools

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


ROV Transport Case

ROV Shipping Case

Secure Your ROV with Poseidon Robotics' Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. At Poseidon Robotics, we understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always At Poseidon Robotics, safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. The Poseidon Advantage With years of experience in subsea robotics and ROV technology, Poseidon Robotics has earned a reputation for excellence in the industry. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today When it comes to ROV transportation, trust Poseidon Robotics to deliver the best. Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection with Poseidon Robotics!

Buy

In Stock

Distributor

New

ASME

Air Freight


Demolition equipment Leasing

Revolutionize Your Demolition Projects with Equipment Leasing from CWB National Leasing Unleash the Power of Flexibility in Your Demolition Business In the demolition industry, having the right equipment is crucial for efficiency and success. Leasing your demolition equipment through Canadian Western Bank (CWB) National Leasing offers a smart solution that aligns with your business goals and financial strategy. Here's how leasing demolition equipment can propel your business forward: 1. Quick Access to Equipment CWB National Leasing values your time. They ensure a rapid review of your application, often making a decision within 48 hours. This means you can have your demolition equipment delivered swiftly after approval, minimizing downtime and accelerating project commencement. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your buying power. It allows you to acquire the necessary equipment through manageable periodic payments, rather than a substantial upfront cost. This approach frees up capital for other investments and enables you to add extra features or accessories to your equipment with minimal additional expense. 3. Control Over Cash Flow With smaller, spread-out lease payments, your demolition equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Adaptable Payment Plans CWB National Leasing offers flexible payment options tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual structures. This flexibility is particularly beneficial for businesses with fluctuating income. 5. Potential Tax Benefits Leasing can offer tax advantages by enabling you to expense lease payments instead of capitalizing the equipment cost. Always consult with a tax advisor to explore how leasing can optimize your business’s tax position. 6. Customized Payment Structures CWB National Leasing understands that no two businesses are the same. They offer customized leases that align with your specific cash flow, ensuring the terms fit your unique business model. 7. Diverse Buyout Options A variety of buyout options are available at the end of your lease, ranging from a nominal amount to up to 50% of the total equipment cost. This flexibility allows for potential ownership of your demolition equipment. 8. Fair Market Value and Flexible Payments You can defer a portion of the equipment’s cost to the lease's end, with options to purchase at fair market value or upgrade. Step-up or step-down payment options are also available if your business anticipates changes in cash flow. 9. Seasonal Payment Adjustments For businesses with seasonal revenue patterns, CWB National Leasing can tailor a payment cycle to match, such as a six-month-on, six-month-off schedule. Conclusion Leasing your demolition equipment through CWB National Leasing is a strategic decision that offers financial flexibility and operational efficiency. It allows you to stay competitive in the demolition industry by using state-of-the-art equipment while managing your finances effectively, setting your business up for sustainable growth and profitability.

Service

In Stock

Service

New

ISO


Panel cutters Leasing

Streamline Your Production with Panel Cutter Leasing from CWB National Leasing Enhancing Your Manufacturing Precision and Efficiency with Advanced Equipment Solutions For businesses involved in woodworking, construction, or any industry requiring precise panel cutting, having reliable and efficient panel cutters is crucial for maintaining productivity and quality. Leasing panel cutters through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their cutting capabilities. Here’s how leasing panel cutters can benefit your business: 1. Quick Access to High-Precision Cutting Equipment CWB National Leasing values the efficiency of your production processes and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your panel cutters can be delivered and operational quickly. This swift service minimizes downtime and enhances your production capacity, allowing you to meet project deadlines and customer demands more effectively. 2. Increased Financial Flexibility Leasing panel cutters with CWB National Leasing boosts your buying power. It allows you to free up capital by opting for periodic payments over a significant initial purchase. The flexibility to add extra features or accessories to your panel cutters for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Manageable lease payments over the term mean your panel cutters start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing panel cutters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease panel cutters through CWB National Leasing is a strategic decision that equips your business with essential cutting equipment while maintaining financial agility. It ensures access to high-quality panel cutters, vital for precise and efficient cutting operations, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business to excel in its respective industry.

Service

In Stock

Service

New

ISO


CSA 120 unit, non-Locking FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

Meer informatie

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


WR-SCSSSV FXE 3-1/2 inch

WR-SCSSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Injection molding Leasing

Accelerate Your Production with Injection Molding Machine Leasing from CWB National Leasing Enhancing Your Manufacturing Efficiency and Flexibility with Advanced Equipment Solutions For businesses in the manufacturing sector, especially those involved in plastic production, automotive components, or consumer goods, injection molding machines are critical for producing high-quality, precision products. Leasing injection molding machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially sound solution for businesses aiming to enhance their production capabilities. Here’s how leasing injection molding machines can benefit your business: 1. Rapid Access to High-Tech Manufacturing Equipment CWB National Leasing recognizes the importance of keeping your production line up-to-date and efficient. They offer a swift leasing process, typically making decisions within 48 hours of application submission. This ensures that your injection molding machines can be delivered and operational quickly, reducing downtime and increasing your manufacturing output. 2. Increased Financial Flexibility Leasing injection molding machines with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of committing to a large upfront purchase, freeing up capital for other essential business operations. The flexibility to add extra features or accessories to your machines for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Smaller lease payments over the term mean your injection molding machines start contributing to your business’s revenue while they're still being paid off. This strategy is key in maintaining a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing injection molding machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position.

Service

In Stock

Service

New

ISO


Braided Line 7/32 inch Sour Service

Superior Strength and Durability: InWaTec Combined’s 7/32" Braided Line for Sour Service Operations In the demanding and intricate world of well interventions, particularly in sour service conditions, the need for equipment that can withstand the rigors of a corrosive environment is paramount. InWaTec Combined is proud to introduce our 7/32" Supa 75 braided line, a specialized solution crafted for the harsh realities of fishing operations in sour service conditions where hydrogen sulfide (H2S) and other corrosive agents are present. Our 7/32" Supa 75 braided line is at the heart of InWaTec Combined's sour service offerings. Designed with high tensile strength and resistance to corrosive elements, this braided line ensures that fishing operations can be carried out with confidence and security, even in environments where H2S poses a significant risk to standard equipment. Resilience Under Pressure: The Supa 75 braided line is not just another cable; it's a product of rigorous engineering and quality materials, able to endure the stressors of sour well conditions without compromising performance. Corrosion Resistance: Our braided line is treated and constructed to resist the corrosive action of sour gas, ensuring longevity and reliability. This means uninterrupted operations and fewer replacements, saving time and resources. High-Performance Operations: With the Supa 75 line, fishing operations are conducted more efficiently and safely. Its robust build allows for the extraction of stuck equipment from the wellbore without the fear of line failure. Safety as a Priority: The safety of well operations is a non-negotiable aspect of InWaTec Combined’s services. The Supa 75 line's integrity in sour environments means enhanced safety for personnel and the well itself. Our commitment to innovation and customer service means that alongside the provision of the 7/32" Supa 75 braided line, InWaTec Combined offers comprehensive support and expertise. We provide tailored solutions that meet the unique challenges of each operation, ensuring that our clients have the best tools and knowledge at their disposal. Choose InWaTec Combined for your sour service operations and benefit from the advanced performance of our 7/32" Supa 75 braided line. With our technology and support, you can expect to extend the life of your well, maintain production efficiency, and uphold the highest safety standards. Trust in our braided line to deliver when it matters most, ensuring that your operations continue to flow smoothly, even in the face of adversity.

Service

In Stock

Service

New

API

Land Freight


Sand Jet Perforator

SJP Abrasive Perforator

Introducing the SJP Sand Jet Perforator from Marlin Oil Tools: A Revolutionary Approach to Well Intervention and Perforation Marlin Oil Tools proudly presents the SJP Sand Jet Perforator, an advanced downhole tool designed to redefine the standards of well intervention and casing or tubing perforation. Tailored to integrate seamlessly with the Bottom Hole Assembly (BHA), the SJP Sand Jet Perforator utilizes a high-velocity gel-sand mixture to execute precise, abrasive cuts through well casing, cement, and even rock formations, ensuring optimal wellbore connectivity and performance. Key Features of the SJP Sand Jet Perforator: High-Precision Perforation: The SJP employs a gel-sand jet emitted at high speeds from durable, abrasive-resistant nozzles, targeting the inner walls of the casing for efficient perforation. Versatile Operation Modes: Designed with flexibility in mind, the SJP Sand Jet Perforator can operate in a basic continuous circulation mode or a ball-activated mode, offering adaptability to various operational needs. Durable Nozzle Construction: Crafted from materials resistant to abrasion, the perforator's nozzles withstand the harsh conditions of downhole operations, ensuring longevity and reliability. Enhanced Operational Efficiency: Whether performing casing perforation or preparing wells for further intervention, the SJP streamlines operations, reducing downtime and enhancing productivity. Seamless BHA Integration: The SJP Perforator is engineered to work cohesively with other BHA components, facilitating a comprehensive approach to well intervention tasks. Operational Flexibility: The ball-activated mode allows for pressure testing of the BHA or the use of additional tools below the perforator, expanding the tool's application range. Maximize your well intervention success with the SJP Sand Jet Perforator from Marlin Oil Tools, a leading-edge solution designed for unparalleled precision in casing and tubing perforation. Leveraging a high-speed gel-sand mixture for abrasive cuts, the SJP enhances wellbore access and productivity. With its robust, abrasive-resistant nozzles and dual operational modes, this downhole tool is optimized for a wide range of well conditions, ensuring durability and adaptability. Ideal for both continuous circulation and precise operations, the SJP Sand Jet Perforator is your go-to tool for efficient, reliable well intervention. Why Choose the SJP Sand Jet Perforator from Marlin Oil Tools? Precision and Efficiency: Achieve targeted, efficient perforation for improved well performance. Adaptability to Well Conditions: Tailor your operations with continuous or ball-activated circulation modes. Longevity in Harsh Environments: Count on durable, abrasive-resistant nozzles for sustained operation. Comprehensive Well Intervention: Integrate seamlessly with BHA components for a holistic intervention strategy. The SJP Sand Jet Perforator by Marlin Oil Tools represents the cutting edge in downhole perforation technology, offering oil and gas operators a powerful tool for enhancing well intervention outcomes. Incorporate the SJP into your operations to achieve superior precision, efficiency, and reliability in well perforation tasks.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Storm Choke 1-1/2 inch K

K valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


2.62 inch Water Injection Valve WI

Water Injection Valve 2.62

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Pull and Set SCSSV

InWaTec Combined: Ensuring Well Integrity with Advanced Pulling and Setting SCSSV Services The oil and gas industry faces the critical challenge of maintaining well integrity for uninterrupted production. At InWaTec Combined, we understand the importance of robust well operations, and our Pulling and Setting Surface Controlled Subsurface Safety Valve (SCSSV) services are at the forefront of addressing this challenge. Revolutionizing DHSV Repair A malfunctioning Downhole Safety Valve (DHSV) can halt production and compromise well integrity, making timely and efficient repairs crucial. Our services are meticulously designed to repair Tubing Retrievable Subsurface Safety Valves (TRSSSV), a process that not only restores well integrity but also resumes production swiftly. By repairing TRSSSVs, we circumvent the need for lock open operations, avoiding the necessity of installing a Wireline Retrievable Subsurface Safety Valve (WRSSSV) which could potentially restrict production flow. Optimized Repair Techniques Conventional repair methods are often time-consuming and costly, requiring extensive workover operations. InWaTec Combined’s approach replaces these outdated methods with cutting-edge techniques that save time and reduce costs. Our expertise in pulling and setting SCSSVs ensures that if a TRSSSV's functionality and integrity cannot be restored, it can be locked open efficiently. We then install a WRSSSV, which is a strategic move that prevents the need for a complex workover, thereby optimizing the repair process. Maintaining Peak Performance The ability to swiftly switch from a TRSSSV to a WRSSSV without a full workover is a game-changer in well service operations. It minimizes downtime and ensures that wells can continue to operate at peak performance levels. Our dedicated teams are equipped with the latest technology and have the expertise to execute these operations seamlessly, ensuring minimal disruption to your production schedules. A Partner in Well Integrity At InWaTec Combined, we pride ourselves on being your trusted partner in maintaining well integrity. Our Pulling and Setting SCSSV services are not just about repairs; they are about providing a comprehensive solution that safeguards your operations against future integrity issues. With our advanced techniques and committed service, we guarantee that your wells remain productive, secure, and profitable. In conclusion, InWaTec Combined is dedicated to providing superior service in the repair and maintenance of SCSSVs. Our innovative approach is designed to keep your wells functioning smoothly, ensuring that well integrity is not just restored but fortified. Trust us to be the guardians of your well's safety and productivity.

Service

In Stock

Service

New

API

Land Freight


Wisdom Lamp 3A

Cordless Miner's Cap Lamp

Provix in New Lowell

Meer informatie

Experience Advanced Illumination with the Wisdom Lamp 3A – A Revolutionary Cordless Miner's Cap Lamp from Provix Provix proudly presents the Wisdom Lamp 3A, a state-of-the-art cordless miner's cap lamp designed for the modern miner. This lamp is a perfect combination of technology, safety, and convenience, making it an essential tool for mining operations. High-Performance Lighting for Enhanced Visibility The Lamp 3A is equipped with a powerful 7,000mAh battery and a rated voltage of 3.7V, ensuring long-lasting and efficient illumination. It features a main light with two settings: a low mode (LO) providing 50 lumens and a high mode (HI) offering a bright 265 lumens. The main light life span is an impressive 50,000 hours, ensuring reliability and longevity. Dual Light Modes for Versatile Use With its main light working current of 80 mA (LO) and 570 mA (HI), the Lamp 3A is versatile for different lighting needs. The main light power is 0.24W (LO) and 1.71W (HI), providing suitable illumination for various tasks. The lamp lighting degree is 1,800lx (LO) and 12,000lx (HI), ensuring clear visibility in all conditions. Safety and Durability in Harsh Conditions Safety is paramount in mining equipment, and the Lamp 3A adheres to the highest standards. It is explosion-proof, certified with ATEX GROUP II, and has an IP68 waterproof rating. The short circuit protection time of less than 320μs adds to its safety features, making it a reliable choice in hazardous environments. Ergonomic and Convenient Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 3A is designed for comfort and ease of use. Its cordless design enhances mobility, and the USB charging capability allows for easy and convenient charging with a charging time of just 5 hours. Long Battery Life for Extended Use The Lamp 3A offers an impressive continuous discharging time of up to 60 hours in low mode and 13 hours in high mode, ensuring it keeps up with the demands of long mining shifts. Get Your Wisdom Lamp 3A Today Enhance your mining operations with the reliable, efficient, and safe Wisdom Lamp 3A. Available now at Provix, this cordless miner's cap lamp is your solution for advanced lighting in challenging environments. For more details, visit www.provix.net or contact us directly.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Equipped Containers

Shipping Container Offices

Introducing Sivam's modified shipping containers - the perfect solution for anyone in need of a portable, efficient, and reliable office space that stands out from the crowd! Our secure modular offices are not your average office space - they're built from durable shipping containers that are modified to suit your needs. Whether you're looking for a portable site office or a unique office space that sets your business apart, Sivam's modified shipping containers are the perfect choice. Thanks to their portable design, our shipping container offices can be easily moved from site to site, giving you the flexibility to set up your office wherever you need it. And with our commitment to efficiency, you can trust that our offices are designed to maximize productivity and minimize wasted space. But don't let their unique design fool you - our shipping container offices are also incredibly secure. We understand the importance of protecting your valuable assets, which is why we build our offices to the highest security standards, giving you peace of mind that your equipment and documents are safe and secure. At Sivam, we pride ourselves on our commitment to quality and customer satisfaction. That's why we work closely with our clients to design and build offices that meet their exact needs, ensuring that every detail is taken care of. So if you're in need of a portable, efficient, and reliable office space that sets your business apart, choose Sivam's modified shipping containers. Contact us today to learn more about how we can help you take your business to the next level!

Buy

In Stock

Manufacturer

New

ISO

Sea Freight


Upgrade of existing copper DCS network

Upgrading Your Lifeline: Nulux’s Proven Expertise in Copper DCS Network Enhancement Navigating the demands of modern-day industrial operations, particularly in the oil and gas sector, necessitates a robust, dependable, and high-performing Distributed Control System (DCS) network. It's more than an infrastructure; it's the operational lifeline that engineers and professionals in the industry lean on for seamless, uninterrupted, and efficient management of processes. But what happens when this lifeline requires enhancement to meet the escalating demands of your evolving operations? This is where Nulux Network Solutions steps in, fortifying your operational backbone with our unparalleled upgrade services. Elevating Your Operational Efficacy with Upgraded Copper DCS Networks Steeped in two decades of prolific experience, Nulux has pioneered numerous industrial projects in North America, specializing in elevating existing copper networks to meet the next level of operational demands, especially in DCS network upgrades. Our seasoned team, wielding a wealth of knowledge in installing, repairing, and upgrading a myriad of copper cabling systems, ensures your DCS network isn’t merely functional but is a testament to peak performance and reliability. The Nulux Advantage: Upgrading with Precision, Experience, and Technical Mastery When your copper DCS network signals a need for an upgrade, the Nulux team becomes your strategic ally, ensuring the transition is not just seamless but also significantly amplifies your network’s efficiency, reliability, and performance. Here's how we elevate your existing DCS networks: Holistic Network Assessment: Our experts delve deep into your existing network, identifying latent potential and areas necessitating upgrades to ensure that the enhanced network is inherently aligned with your operational demands. Strategic Upgrade Planning: Our plans are carved from a place of operational understanding, ensuring the upgrades augment not just the network’s technical performance but also enhance your process management, control, and data flow. Tailored Solutions: Our upgrade solutions are crafted, ensuring they are inherently in sync with your specific requirements, be it in voice, data, or video services, ensuring the upgraded DCS network is a perfect fit for your operational landscape. Uninterrupted Support: Beyond the upgrade, we stand beside you, offering consistent technical support, ensuring your enhanced network continues to operate at peak performance throughout its lifecycle. Why Copper Remains King: Sustaining Reliability and Performance Copper networks have steadfastly held their ground as a preferred choice for structured cabling due to their high-bandwidth transmission capability, long-term reliability, ease of installation, and cost-effectiveness. Your upgraded DCS network, enriched by the myriad benefits copper brings, becomes a solid, reliable, and efficient operational backbone, ensuring enhanced control, communication, and data management across your industrial processes. Aligning with Nulux: Upgrading Your Network, Upgrading Your Success Choosing Nulux as your copper DCS network upgrade partner translates to aligning with a team that understands networks beyond their technical framework. Our solutions are derived from an innate understanding of what businesses, especially in the oil and gas sector, require to maintain a competitive edge. Our legacy, crafted over 20 years, speaks of our commitment, expertise, and unwavering dedication to delivering high-quality network solutions. It’s not just about staying connected; it’s about ensuring that every pulse of your network propels your operations toward unbridled efficiency and success. Let’s explore how your existing copper DCS network can be transformed into a superior, high-performing asset, driving your operations to new heights of efficiency and control. Connect with Nulux Network Solutions today for a comprehensive consultation and pave the way towards an upgraded operational future.

Service

In Stock

Service

New

ISO


Industrial IOT

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Elevating Energy Excellence through Cutting-Edge IoT Solutions In the dynamic world of the energy sector, innovation isn't just a choice – it's a necessity. ELEKS takes center stage, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. Our expert IoT development services introduce a new era of possibilities, offering custom Industrial Internet of Things (IIoT) solutions that bring efficiency, precision, and safety to the forefront of your operations. Here's how ELEKS can be your driving force in embracing the future of energy management: Tailored IIoT Solutions: Your operations are unique, and so are our solutions. Our expert IoT development services craft custom IIoT solutions that align seamlessly with your operational goals and challenges. Streamlined Management: Wave goodbye to inefficiencies. Our IIoT solutions streamline energy and utilities management, optimizing your processes and resources for maximum efficiency. Proactive Network Monitoring: Monitoring your network becomes a proactive endeavor with IIoT. Receive real-time insights, enabling you to foresee challenges and strategize effectively. Data-Driven Insights: Harness the power of IoT sensors and connected devices. Gather valuable data insights that allow you to detect even the slightest fluctuations in temperature, moisture levels, and vibrations. Predictive Equipment Management: Embrace the power of prediction. Utilize data insights to predict and prevent equipment failures, ensuring continuous operations and minimizing downtime. Safety Redefined: Safety takes center stage with IoT technology. Swiftly detect anomalies and potential risks, ensuring the safety of your assets, teams, and environment. Precision Unleashed: Combine IoT with location-based services for unprecedented precision. Monitor assets in real-time, optimize their performance, and make data-driven decisions. Automated Inspection Mastery: The synergy of IoT and drones elevates inspections to a new realm. Conduct automated inspections of facilities and power lines with unmatched precision and effectiveness. Swift Data Analysis: Gathering data is important, but analyzing it efficiently is vital. Our IoT solutions enable swift and insightful data analysis, empowering informed decision-making. A Future of Possibilities: With ELEKS, your future is limitless. Our energy sector technology expertise paves the way for future-ready operations, ensuring you stay ahead of industry trends. ELEKS: Shaping Energy Excellence ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise redefines industry standards, transforming challenges into opportunities and inefficiencies into streamlined success stories. Join us in scripting the energy narrative where innovation blends seamlessly with precision, safety reigns supreme, and efficiency marks every step. With ELEKS, you're not just adopting IoT solutions – you're embracing a vision of a safer, more efficient, and sustainable energy future. Step into a world where IoT-driven solutions redefine energy excellence, and your operational aspirations become reality.

Service

Made to Order

Service

New

ISO


HDI 3200 MGS Differential Monitoring System

Mud Gas Monitor

Ensure precise monitoring of liquid seal pressure, mud gas pressure, and mud temperature with the advanced HDI 3200 MGS Differential Monitoring System. Designed as a stand-alone, battery-powered solution, this monitoring system is specifically engineered to provide accurate readings and reliable performance in the most demanding environments. Unparalleled Accuracy and Reliability: At HDI, accuracy and reliability are at the core of everything we do. The HDI 3200 MGS system utilizes field-proven HDI Gauges, renowned for their precision and durability. With our system, you can trust that your pressure and temperature measurements are accurate and dependable, empowering you to make informed decisions and maintain optimal operational control. Detailed Monitoring and Differential Readings: The HDI 3200 MGS system goes beyond basic pressure and temperature measurements. It offers the unique capability to monitor the differential pressure between liquid seal and mud gas pressures, providing valuable insights into your well conditions. By accurately measuring the differential, you can gain a deeper understanding of the dynamics within your system, enabling you to make timely adjustments and optimize performance. Alternate Engineering Units for Versatile Applications: Flexibility is key in any monitoring system. With the HDI 3200 MGS, you can easily switch between engineering units to suit your specific needs. Whether you prefer PSI increments or an alternative unit of measurement, our system accommodates your requirements, ensuring compatibility with your existing workflows and standards. Seamless Integration and Secondary Output: The HDI 3200 MGS system offers seamless integration with local and remote visual displays, providing you with the flexibility to monitor and track readings from different locations. Additionally, the system features a 4-20mA secondary output, allowing for easy integration with other monitoring systems or data acquisition devices. This enables you to centralize your data and streamline your monitoring processes for enhanced efficiency. Depend on Houston Digital Instruments: With a legacy of excellence in measurement and control solutions, Houston Digital Instruments is a trusted partner in the industry. Our commitment to accuracy, reliability, and safety shines through in every product we develop. The HDI 3200 MGS Differential Monitoring System is a testament to our dedication to providing innovative solutions that meet the evolving needs of our customers. Experience the power of precision monitoring. Contact our knowledgeable team today to discuss your specific requirements and discover how the HDI 3200 MGS can revolutionize your operations. Trust Houston Digital Instruments for accurate, reliable, and efficient monitoring solutions. Where Precision Meets Performance - HDI, your partner in measurement excellence.

Buy

In Stock

Manufacturer

New

API

Air Freight


Monitors Leasing

Supercharge Your Business with Leased Monitors from CWB National Leasing Is your business ready to take a leap forward, boost efficiency, and increase profitability? Look no further than CWB National Leasing for all your monitor leasing needs. Here's why you should choose us: Get Your Equipment Fast In today's fast-paced business world, access to cutting-edge technology is essential. At CWB National Leasing, we understand the importance of obtaining your equipment promptly. When you apply for a monitor lease with us, you can expect swift decision-making. Just how fast are we? Typically, within a mere 48 hours of your approval, we notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your top-notch monitors are delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By opting for leasing, you can unlock vital cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your equipment with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is crucial for the success of any business. When you lease monitors with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your monitors, they will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we recognize that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your monitor lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing monitors through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing monitors with confidence. In conclusion, leasing monitors with CWB National Leasing is the strategic choice for business owners determined to elevate their operations, enhance productivity, and maximize profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your monitor leasing needs today!

Service

In Stock

Service

New

ISO


Solvable Bridge Plug

SBP Solvable Bridge Plug

Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Continuous RD-Short 6’10”

Regular Duty

Introducing Safe-T-Whip™ Continuous RD-Short 6’10” (SW-RD-02-S): Unmatched Safety and Reliability for Short Restraint Applications At Safe-T-Whip & Restraints Inc., we take safety seriously, and our commitment to providing the best safety solutions is unwavering. We are thrilled to present our latest innovation - the SW-RD-02-S Safe-T-Whip™ Continuous RD-Short. Designed specifically for regular duty applications that require a shorter restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-S Safe-T-Whip™ Continuous RD-Short is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a shorter restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Short to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Short is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Short is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Short is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Short, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-S Safe-T-Whip™ Continuous RD-Short is the ultimate safety restraint for short applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Contact us to learn more and secure your Safe-T-Whip™ Continuous RD-Short today.

Buy

In Stock

Product & Service

New

API

Air Freight


MS-201EC Extraction Condensing Steam Turbine

Multistage Turbine

Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Subsea Transformer for ROV

ROV Transformer

Poseidon Robotics Introduces the Subsea Transformer: Taking Telemetry to New Depths In our unwavering commitment to advancing subsea robotics and ROV technology, Poseidon Robotics is thrilled to introduce our latest breakthrough: the Subsea Transformer. As part of our renowned Modular Telemetry System, this innovative subsea transformer assembly is set to redefine the capabilities of telemetry in deep-water operations. Unlocking New Possibilities At Poseidon Robotics, we understand the unique challenges faced by subsea professionals, and we continuously strive to provide solutions that exceed expectations. The Subsea Transformer is a testament to this dedication, offering a seamless integration of state-of-the-art components to empower your subsea missions. High Voltage Meets High Performance Designed with precision engineering and utilizing cutting-edge technology, our Subsea Transformer boasts a 3kV input and delivers an impressive 240VAC + HV motor output. This combination of high voltage and performance ensures efficient and reliable power distribution for your critical subsea operations. MacArtney Opto-Link Connectors The Subsea Transformer is equipped with MacArtney Opto-Link connectors, renowned for their robustness and reliability. These connectors ensure secure data transmission, minimizing the risk of signal loss and maintaining a seamless flow of information between your subsea equipment and surface systems. CWDM Technology To further optimize data transmission and maximize the potential of your subsea operations, our Subsea Transformer incorporates Coarse Wavelength Division Multiplexing (CWDM) technology. By enabling multiple signals to be transmitted over a single fiber optic cable, CWDM enhances the efficiency of your telemetry system, reducing cable requirements and streamlining your subsea setup. Unparalleled Integration The Subsea Transformer assembly is engineered to seamlessly integrate with our Modular Telemetry System, forming a powerful combination that is greater than the sum of its parts. This integration empowers you with a comprehensive telemetry solution, allowing you to focus on your subsea objectives without the distractions of technical complexities. Reliability and Performance You Can Trust When it comes to subsea operations, reliability is paramount. Poseidon Robotics has meticulously tested and validated the Subsea Transformer to ensure it performs flawlessly even in the harshest subsea environments. With our product, you can trust that your telemetry system will operate at peak performance, unleashing new possibilities for your subsea endeavors. Elevate Your Subsea Missions with Poseidon Robotics Discover a new era of subsea telemetry capabilities with Poseidon Robotics' Subsea Transformer. Whether you are exploring the depths of the ocean or conducting critical subsea inspections, our solution is here to support and enhance your operations. Contact Us Today To learn more about the Subsea Transformer and how it can elevate your subsea missions, contact Poseidon Robotics today. Our team of experts is eager to collaborate with you in shaping the future of subsea robotics and ROV technology. Embrace the power of innovation with Poseidon Robotics!

Buy

In Stock

Manufacturer

New

ASME

Air Freight


HCR-3000

HCR-3000

Introducing HCR-3000: The Safe and Effective Synthetic Acid™ Replacement At Cleanstream, we're committed to delivering high-performance oilfield solutions that are both environmentally responsible and safe for workers. That's why we're proud to introduce HCR-3000, our latest Synthetic Acid™ replacement product that delivers the same results as mineral acids but without the halogen content. HCR-3000 is a strong, non-fuming, and non-oxidizing acid alternative that can be used in a variety of oilfield applications, including scale removal, well stimulation, and acidizing. Unlike traditional mineral acids, HCR-3000 is non-corrosive to skin and safe on chrome and chrome plating, making it a safer and more reliable choice for your operations. With its comprehensive spending nature, HCR-3000 is an excellent choice for operators looking to cut down on chemical costs. Plus, its non-fuming, non-regulated formula makes it easy and safe to transport and handle, reducing the risk of accidents and exposure to hazardous chemicals. But don't let its eco-friendly and worker-safe properties fool you. HCR-3000 is a powerful acid replacement that delivers high-temperature stability of over 1800C, making it an excellent choice for high-temperature applications. And with the ability to be enhanced through the addition of conventional oilfield chemistry, HCR-3000 can be customized to meet your specific needs and requirements. Say goodbye to traditional mineral acids and hello to HCR-3000, the safer, more effective Synthetic Acid™ replacement from Cleanstream.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Geotechnical ROV tooling skid

Custom Designed Geotechnical Skid for ROV's

Unleashing the Power of Customization: Introducing Poseidon Robotics' Geotechnical ROV Tooling Skid At Poseidon Robotics, we understand that every subsea mission is unique, and each underwater challenge demands a tailored approach. That's why we are thrilled to present our latest innovation - the Custom Designed Geotechnical ROV Tooling Skid. This revolutionary tooling solution empowers you to optimize your ROV's capabilities for geotechnical exploration like never before. Designed for Your Mission No two subsea projects are alike, and we believe that your equipment should reflect that. Our Geotechnical ROV Tooling Skid is designed with customization at its core. Our team of experts works closely with you to understand the specific requirements of your mission, ensuring that the tooling skid is precisely tailored to suit your needs. Versatility Redefined The Geotechnical ROV Tooling Skid is engineered to be highly versatile, accommodating a wide range of geotechnical tasks. From seabed sampling and sediment coring to geophysical surveying and subsea drilling, this tooling skid is your ultimate companion in the quest for understanding the ocean floor. Precision and Control When it comes to geotechnical operations, precision is paramount. Our tooling skid is equipped with state-of-the-art controls that offer you unparalleled accuracy and maneuverability. You'll have complete control over your ROV's movements, allowing you to navigate complex terrains with ease. Robust and Reliable Durability and reliability are critical in the challenging subsea environment. We take great pride in the craftsmanship of our Geotechnical ROV Tooling Skid, ensuring that it can withstand the rigors of deep-sea missions. Built with high-quality materials and cutting-edge engineering, this tooling skid is built to last. Expandable and Future-Proof We understand that subsea exploration is an evolving field, and your equipment should be able to keep up with advancements. Our Geotechnical ROV Tooling Skid is designed to be expandable and future-proof. As your mission requirements evolve, the tooling skid can be easily adapted to integrate new sensors, tools, or functionalities. Unmatched Expertise Poseidon Robotics boasts a team of seasoned experts in subsea robotics and ROV technology. With years of industry experience, our engineers and technicians have an in-depth understanding of the challenges faced in the subsea domain. You can trust us to deliver a custom-designed tooling skid that aligns perfectly with your project's objectives. Your Partner in Subsea Excellence At Poseidon Robotics, we take pride in being your partner in subsea excellence. Our commitment to innovation, quality, and customer satisfaction drives us to deliver cutting-edge solutions that transform the way you explore the ocean's depths. Unleash Your ROV's Potential Are you ready to revolutionize your geotechnical exploration capabilities? Unlock the power of customization with Poseidon Robotics' Geotechnical ROV Tooling Skid. Let us work together to design a tooling solution that matches your mission's unique requirements. Contact us today to embark on a new era of subsea possibilities.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Tapered Mill

TPM Tapered Mill

Introducing the TPM Tapered Mill from Marlin Oil Tools: The Essential Downhole Tool for Precision Well Intervention Marlin Oil Tools is proud to offer the TPM Tapered Mill, a specialized downhole tool crafted for superior performance in well intervention tasks. Designed to navigate and resolve wellbore challenges efficiently, the TPM Tapered Mill excels in grinding and washing out objects that are softer than the mill's cutters, from intentionally placed equipment like bridge plugs to unexpectedly lost tools. Key Features of the TPM Tapered Mill: Versatile Milling Capabilities: Engineered to remove a wide array of downhole obstructions, ensuring a clear path for well operations. Optimized Debris Removal: Equipped with multiple flushing holes, the TPM facilitates the circulation of drilling fluid, efficiently clearing milled particles from the well and cooling the cutting edge. Durable Carbide Construction: Features a robust body with carbide welded on, available in crushed carbide and various insert designs to match milling requirements against different materials. Customizable Geometry: The tapered design is tailored to enhance the ID of wellbore restrictions, with customizable geometry including the length of the cone, minimal OD, and maximal OD based on client specifications. Extended Service Life: The longevity of the carbide components is maximized through optimal milling modes and can be further extended with Marlin Oil Tools' comprehensive redress services for worn carbide. Powered by Downhole Motors: Rotation facilitated by a downhole motor enhances the milling efficiency, making the TPM an integral part of the well intervention toolkit. Elevate your well intervention operations with the TPM Tapered Mill from Marlin Oil Tools, a leading-edge solution designed for the efficient removal of downhole obstructions in the oil and gas industry. This downhole tool combines advanced milling technology with a tapered design to effectively increase the ID of wellbore restrictions, ensuring operational success. With its durable construction, customizable geometry, and optimized debris removal capabilities, the TPM Tapered Mill is essential for achieving a clear and operational wellbore. Whether addressing emergency lost equipment or routine well maintenance, the TPM Tapered Mill offers precision, efficiency, and reliability. Trust Marlin Oil Tools for your well intervention needs and experience unparalleled performance and service life with the TPM Tapered Mill. Why Choose the TPM Tapered Mill from Marlin Oil Tools? Precision Milling: Delivers unmatched efficiency in grinding down and removing wellbore obstructions. Customization to Fit Operational Needs: Offers tailored solutions to meet specific well intervention challenges. Robust and Reliable: Built to withstand the harsh downhole environment and ensure prolonged tool effectiveness. Expert Support and Services: Backed by Marlin Oil Tools' commitment to quality and customer support, including redress services for extended tool life. The TPM Tapered Mill by Marlin Oil Tools represents the pinnacle of downhole milling innovation, providing a versatile, durable, and efficient solution for well intervention and maintenance operations. Incorporate the TPM Tapered Mill into your toolkit for smoother, more effective well interventions.

Buy

Made to Order

Manufacturer

New

API

Land Freight


NORM Storage

Warehousing and storage of Radioactive Material

Cleanstream: Ensuring Safe and Efficient Storage of NORM Material At Cleanstream, we understand the importance of maintaining a safe and sustainable environment. That's why we have developed rigorous procedures and controls to ensure that NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. NORM, or Naturally Occurring Radioactive Material, is present in many industries, including oil and gas, mining, and manufacturing. While it is a naturally occurring substance, it can be harmful if not handled properly. That's why Clearstream has taken proactive steps to ensure that our clients can safely and responsibly manage their NORM material. Our state-of-the-art storage facilities are equipped with the latest technology to monitor and control environmental factors, including temperature, humidity, and radiation levels. Our experienced team of professionals is trained to handle NORM material safely and efficiently, ensuring that it is stored in compliance with all regulatory requirements. At Cleanstream, we understand that our clients' needs are unique, and we work closely with them to develop customized solutions that meet their specific requirements. Our flexible storage options are designed to accommodate various types of NORM material, and we can quickly and efficiently adapt to changing circumstances. We take great pride in our commitment to safety, quality, and environmental responsibility. Our rigorous procedures and controls ensure that our clients can have peace of mind, knowing that their NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. Contact us today to learn more about how Cleanstream can help you safely and responsibly manage your NORM material.

Rental

Currently in Use

Service

New

ISO

Land Freight


Software Testing and QA Services

Software Development

Eleks in Toronto

Meer informatie

ELEKS Software Testing and QA Services: Elevate Your Product Excellence In the fast-paced realm of software development, delivering a product that not only works but excels is the key to standing out in the crowd. ELEKS Software Testing and QA Services empower you to not just meet industry standards, but to exceed them. With our custom-built services, you can ensure a robust, high-performing, and user-centric product that captures your audience's attention. ELEKS Software Testing and QA Services: Your Path to Excellence Deliver Seamless User Experience: Our performance testing service empowers you to address issues related to peak performance, responsiveness, security, and stability long before your users encounter your product. By mitigating brand-damaging lag or downtime, you can confidently deliver an experience that resonates with your audience. Accelerate Time-to-Market: With our support, you can speed up your product's journey to market by up to 80%. Through performance and test automation services that align with continuous integration and deployment, we identify issues early in the development cycle, enabling you to avoid costly rework. Trim Development Costs: ELEKS' testing services uncover issues during the early stages of your Software Development Lifecycle (SDLC) when rectifications are less expensive. Experience up to 20% reduction in testing costs with our test automation service, which streamlines human resources and testing time. What's more, your custom test scripts can be reused at no additional cost. Scale Your Business Rapidly: Implement continuous Quality Assurance (QA) to adapt swiftly to your customers' evolving needs. Our independent testing service offers an impartial second opinion, enhancing your ability to identify pitfalls and risks and giving you the confidence to scale your business. Ensure Software Compliance: Guarantee your software aligns with critical quality standards like IEEE 829, ISO 29119, IEEE 730, and ISO 25010. Our framework adheres to industry standards across performance testing, independent testing, and automated testing processes. ELEKS Software Testing and QA Services: Unveiling Excellence Software Audit: Assess your code's quality, test coverage, security, user experience, and integration layer with our software audit service. Make the necessary enhancements to ensure your product's integrity. Performance Testing: Leverage our performance testing service to construct responsive, stable, and scalable applications with an astounding 80% reduction in testing time. Test Automation: Experience up to 20% cost reduction in manual QA expenses. Our test automation detects bugs, eliminates human errors, and tests your software's resilience, ensuring excellence at every level. ELEKS Software Testing and QA Services: Elevate Your Excellence ELEKS Software Testing and QA Services lead you on a journey where quality isn't just a goal – it's a guarantee. Elevate your software products to excellence, with high-performance, user-optimized solutions that exceed expectations. Harness the power of ELEKS to not only meet industry standards but to set new benchmarks for software excellence.

Service

Made to Order

Service

New

ISO


SMAW Welder MMA 201

Welding Machine

Powerful, Portable, and Versatile: Introducing the MMA 201 Welding Machine At Canaweld, we take pride in providing welders with top-notch equipment that delivers high-quality performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we are excited to present the MMA 201 - a welding machine that exceeds expectations in power, versatility, and durability. Powerful Performance on the Go The MMA 201 is your ultimate welding companion, offering the best-in-class duty cycle in its category. With a maximum current of 200A and the ability to deliver 160A with a 100% duty cycle, this welding machine provides the extra power you need to tackle challenging welding tasks all day long. Whether you're on a construction site or working in the oil & gas industry, the MMA 201 has got your back. Portable and Lightweight Design We understand the importance of mobility for welders on the go. That's why we've designed the MMA 201 to be portable and lightweight, making transportation effortless. The included carrying belt ensures ease of movement, allowing you to take this welding powerhouse wherever your work demands. Unmatched Versatility The MMA 201 is more than just a Stick Welding machine. It also excels in TIG welding with a lift start, providing you with the versatility to take on a wide range of welding applications. Whether you're working with steel, stainless steel, or aluminum, the MMA 201 delivers excellent arc characteristics with the most common rods up to 5/32 inches. Built to Withstand the Toughest Conditions The MMA 201 is tested in extreme conditions, proving its resilience in temperatures up to 104°F (40°C). Its rugged construction and large size Dinse style welding connectors ensure durability and reliability even in the harshest environments. Advanced Features for Effortless Welding With automatic hot start, arc force function, and electrode anti-sticking capabilities, the MMA 201 provides an unmatched welding experience. It's fan-cooled and thermally protected against overheating, safeguarding your equipment for long-lasting performance. Experience Excellence with Canaweld When you choose the MMA 201, you choose excellence backed by Canaweld's comprehensive 3-year warranty. Trust in a welding machine that's engineered to exceed your expectations and deliver the power, versatility, and durability you need. Empower your welding journey with the MMA 201 Welding Machine. Elevate your skills, tackle challenging projects, and take your welding to new heights with Canaweld. Your welding success begins with the MMA 201 - Where Power Meets Portability!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Retail Verticals

Cybersecurity

ALCiT in Mississauga

Meer informatie

Transforming Retail Operations with ALCiT's Tailored Solutions In the dynamic world of retail, whether it's a bustling store or a bustling restaurant, the need for seamless operations and enhanced security is non-negotiable. ALCiT is your answer – your strategic partner in navigating the intricate landscape of retail demands. Welcome to the future of retail excellence. Security and Compliance Unleashed Security isn't just a buzzword; it's a non-negotiable requirement. ALCiT ensures that your network aligns with your compliance needs, from PCI to SOR/2018-144. With us, you can rest assured that your operations are fortified against potential threats and aligned with industry standards. Connectivity That Powers Progress In the digital age, reliable connectivity is your lifeline. ALCiT ensures that your Internet connection is robust, enabling you to place orders, monitor operations, and stay ahead. Efficiency is the name of the game, and we provide you with the tools to excel. Empowering Seamless Shopping Experiences Retail isn't just about products; it's about experiences. ALCiT's reliable WiFi solutions create multiple networks, catering to your devices, mobile point of sale systems, and even your customers. With us, your retail space becomes a hub of connectivity, enhancing engagement and satisfaction. Visual Insight at Your Fingertips Monitoring isn't just surveillance; it's strategic insight. ALCiT's video monitoring and recording solutions offer a watchful eye over your operations. Whether it's security, customer behavior analysis, or staff performance, our solutions empower you to make informed decisions. Remote Asset Management Made Easy Retail is fast-paced, and ALCiT ensures your electronic assets keep up. Our efficient remote management solutions enable you to maintain, optimize, and monitor your assets from anywhere, ensuring seamless operations and minimal disruptions. Secure Today, Flourish Tomorrow ALCiT's retail solutions redefine efficiency, connectivity, and security. Embrace the future of retail excellence where your operations run seamlessly, your connectivity is unwavering, and your customers' experiences are unforgettable. Elevate your retail operations with ALCiT's tailored solutions.

Service

Made to Order

Service

New

ISO


QUP Retrievable Bridge Plug

QUP Plug

Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more!

Buy

In Stock

Product

New

API

Sea Freight


Big Data and AI

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Revolutionizing Energy Sector Through Big Data and AI Expertise The energy sector is undergoing a seismic shift, and at ELEKS, we're proud to be at the forefront of this transformation. Our unrivaled expertise in Big Data and artificial intelligence (AI) opens new avenues of efficiency and innovation for your organization. With a deep commitment to reshaping the energy landscape, we present you with a list of ten compelling benefits that our services can offer: 1. Data-Driven Decision-Making: Harness the power of data-driven insights. ELEKS' data modelling expertise and AI solutions empower you to make informed decisions that steer your organization towards success. 2. Streamlined Data Analytics: From diagnostic to predictive, our services streamline the entire spectrum of data analytics, providing clarity and actionable insights to support your strategic planning. 3. Swift Load-Flow Calculation: Embrace lightning-fast load-flow calculations powered by AI. Experience a significant reduction in calculation times, enabling quicker responses and better resource allocation. 4. Efficient Asset Management: Manage your energy assets with precision. Our AI-driven tools offer accurate asset insights that facilitate optimal utilization, maintenance planning, and resource allocation. 5. Risk Management Enhancement: Anticipate risks and mitigate them effectively. ELEKS' AI-based solutions help identify potential risks, enabling you to proactively address challenges and ensure continuity. 6. Innovation at Scale: ELEKS doesn't just adapt to change; we pioneer it. Our innovative approach ensures you stay ahead in an evolving energy landscape. 7. Personalized Solutions: Tailored to your organization's unique needs, our AI-powered offerings provide custom solutions that align seamlessly with your goals. 8. Technical Excellence: Expect precision and accuracy in every solution we deliver. Our team of experts ensures that you receive results of the highest technical caliber. 9. Collaborative Partnership: Partner with ELEKS to unlock your energy sector's potential. We collaborate closely with you, combining your industry knowledge with our technical prowess. 10. Future-Ready Resilience: With ELEKS, you're prepared for the future. Our AI solutions equip your organization to adapt, thrive, and excel as the energy sector evolves. At ELEKS, we're not just offering services; we're forging a path towards a more efficient, innovative, and sustainable energy sector. Join us in this journey of transformation as we leverage Big Data and AI to reshape the energy landscape. Trust ELEKS to empower your organization to make informed decisions, optimize operations, and drive success in the dynamic energy sector of tomorrow.

Service

Made to Order

Service

New

ISO


Lead Impression Block

Downhole Tools

Elevate Downhole Diagnostics with HOCA Oil Tools' Lead Impression Blocks In the intricate world of downhole operations, understanding the precise conditions within the wellbore is not just beneficial—it's imperative. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools that cater to the diverse needs of the oil and gas industry. A standout in our product lineup is the Lead Impression Block (LIB), an indispensable tool designed for capturing clear, detailed impressions of downhole conditions. Lead Impression Blocks: The Key to Accurate Downhole Intelligence HOCA's Lead Impression Blocks are engineered for exceptional performance, providing operators with the critical data needed to make informed decisions. Made with high-quality materials, our LIBs are designed to withstand the challenging environments found within wellbores, ensuring reliable results every time. Six Benefits of Using HOCA's Lead Impression Blocks: Precision Diagnostics: Our LIBs provide precise imprints of the downhole environment, enabling accurate identification of obstructions, tool fishings, and the condition of the wellbore. Cost-Efficiency: By delivering accurate downhole data, our LIBs help avoid unnecessary operations and reduce the risk of costly mistakes, leading to more efficient and cost-effective well management. Easy Interpretation: The clear impressions made by our LIBs allow for straightforward analysis, enabling quick decision-making and streamlined operations. Durability and Reliability: Designed for the rugged downhole environment, HOCA's Lead Impression Blocks are built to last, providing consistent, reliable results even in the most challenging conditions. Versatility: Compatible with various downhole tools and suitable for multiple applications, our LIBs are a versatile addition to any downhole toolset, making them ideal for a wide range of operations. Enhanced Safety: By providing accurate information about downhole conditions, our LIBs help minimize the risks associated with downhole operations, enhancing overall safety for personnel and equipment. Transform Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to innovation and excellence. Our Lead Impression Blocks are a testament to our dedication to providing the oil and gas industry with tools that not only meet but exceed expectations. By integrating our LIBs into your operations, you can expect enhanced diagnostic capabilities, improved operational efficiency, and reduced costs. Embrace the clarity and precision offered by HOCA's Lead Impression Blocks and experience a new level of downhole diagnostic prowess. Choose HOCA Oil Tools for all your downhole needs and unlock the full potential of your wellbore operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Automate Mass-Payments and Empower Your Workforce

Business FX Services

Transform Your Business with Dunbridge Financial: Automate Mass-Payments and Empower Your Workforce As a forward-thinking business, staying ahead of the competition means embracing automation and efficiency in every aspect of your operations. With Dunbridge Financial, you can revolutionize the way you pay employees and sub-contractors. Our financial service allows you to automate mass-payments, ensuring your workforce is paid promptly and accurately in their local or preferred currency. Automate Mass-Payments for Streamlined Operations Time is a valuable asset, and we understand that managing individual payments can be time-consuming and prone to errors. With Dunbridge Financial, you can automate mass-payments effortlessly, saving you precious time and resources. Say goodbye to manual payment processing and embrace the future of streamlined operations. Pay Employees and Sub-Contractors in Local or Preferred Currency We believe in empowering your workforce and sub-contractors by offering payment options that suit their preferences. With Dunbridge Financial, you can pay employees and sub-contractors in their local currency or their preferred currency, ensuring that they receive their earnings with ease and convenience. Why Choose Dunbridge Financial for Automated Mass-Payments? 1. Seamless Automation Our platform is designed to automate your mass-payments with ease. Whether you're paying a large group of employees or multiple sub-contractors, our system streamlines the process, reducing manual intervention and minimizing errors. 2. Flexible Payment Options At Dunbridge Financial, we prioritize the preferences of your workforce. By offering payments in local or preferred currencies, you enhance employee satisfaction and foster positive relationships with sub-contractors. 3. Real Accounts in Your Company's Name Our financial service provides real accounts in your company's name, giving your business a professional and credible image. Your employees and sub-contractors will appreciate the clarity and transparency of receiving payments from your company. 4. Expert Support Navigating the world of automated mass-payments can be complex, but not with Dunbridge Financial. Our dedicated account managers are here to provide you with expert guidance, ensuring a smooth and successful implementation of automated payment processes. Join Us Today and Embrace Financial Efficiency Don't let manual payment processing slow down your business. Join Dunbridge Financial today and experience the power of automated mass-payments. Streamline your operations, pay your workforce accurately and efficiently, and elevate your business to new heights. Seize the Opportunity with Dunbridge Financial By choosing Dunbridge Financial, you gain a strategic advantage in managing your payments. Embrace automation, enhance employee satisfaction, and boost operational efficiency. Experience the Difference Unlock a world of financial efficiency and automation with Dunbridge Financial. Sign up now and embrace the future of streamlined mass-payments. Empower your workforce, simplify your payment processes, and elevate your business to new levels of success. The future of financial efficiency starts here.

Service

Made to Order

Service

New

ISO

Air Freight


Scanners Leasing

Boost Your Business Efficiency with Leased Scanners from CWB National Leasing Are you ready to supercharge your business, streamline your operations, and enhance your profits? Look no further than CWB National Leasing for all your scanner leasing needs. Here's why leasing scanners with us is the perfect choice: Get Your Equipment Fast In today's fast-paced business environment, quick access to cutting-edge technology is vital for staying competitive. At CWB National Leasing, we understand the urgency of acquiring your scanners promptly. When you apply for a scanner lease with us, you can expect a lightning-fast decision-making process. Just how fast are we? Typically, within a mere 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your high-quality scanners are delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By choosing leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your scanners with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease scanners with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your scanners, they will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your scanner lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing scanners through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing scanners with confidence. In conclusion, leasing scanners with CWB National Leasing is the strategic choice for business owners determined to enhance their efficiency, reduce costs, and increase profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your scanner leasing needs today!

Service

In Stock

Service

New

ISO


Coiled Tubing Sliding Sleeve Activator

SSA Sliding SLeeve Actuator

Introducing the SSA (Sliding Sleeve Actuator) from Marlin Oil Tools: Revolutionizing Multistage Fracturing Operations Marlin Oil Tools proudly presents the SSA (Sliding Sleeve Actuator), a state-of-the-art downhole tool designed to optimize well intervention and multistage fracturing operations. Engineered to activate sliding sleeves with unparalleled efficiency and precision, the SSA is an essential tool for modern well completion strategies. By eliminating the need for traditional activation balls, the SSA streamlines fracturing operations, significantly reducing intervention times and enhancing overall well productivity. Key Features of the SSA (Sliding Sleeve Actuator): Efficient Sleeve Activation: The SSA is specifically designed to activate sliding sleeves in the liner of the well, targeting planned fracturing spots with accuracy. Simplifies Operations: Replaces the conventional method of dropping activation balls into the well, thereby simplifying the activation process. Rapid Deployment and Retrieval: Engineered for use with coil tubing, the SSA ensures quick deployment and retrieval, minimizing downtime in fracturing operations. Eliminates Milling or Catching: By using the SSA, the need to mill or catch activation balls post-fracturing is removed, enhancing operational safety and efficiency. Seamless Integration: Optimally designed to integrate with existing well completion setups, the SSA facilitates a smooth fracturing process. Precision in Fracturing: Offers precise control over the activation of sliding sleeves, ensuring effective multistage fracturing exactly where needed. Elevate your well intervention and fracturing operations with the SSA (Sliding Sleeve Actuator) from Marlin Oil Tools, a groundbreaking solution tailored for the oil and gas industry. This innovative downhole tool revolutionizes sliding sleeve activation during multistage fracturing, offering a more efficient and precise alternative to traditional activation balls. Designed for rapid deployment and retrieval via coil tubing, the SSA not only simplifies fracturing operations but also significantly enhances well productivity and safety. Choose the SSA for a streamlined, effective approach to modern well completions and fracturing. Why Choose the SSA from Marlin Oil Tools? Operational Efficiency: Dramatically reduces intervention times, allowing for faster and more efficient fracturing operations. Enhanced Safety and Simplicity: Removes the complexities and safety concerns associated with milling or catching traditional activation balls. Precision Activation: Ensures accurate activation of sliding sleeves, maximizing the effectiveness of multistage fracturing. Innovative Design: The SSA's design is optimized for ease of use with coil tubing, ensuring seamless operation and integration into fracturing workflows. The SSA (Sliding Sleeve Actuator) by Marlin Oil Tools represents the forefront of innovation in downhole tools, providing operators with an advanced solution to meet the challenges of today's fracturing operations. Incorporate the SSA into your well intervention toolkit to achieve superior efficiency, safety, and performance in multistage fracturing.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Dual Circulation Sub for Coiled Tubing

DCS Coiled Tubing Tool

Introducing the DCS (Dual Circulation Sub) from Marlin Oil Tools: A Pioneering Solution for Enhanced Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present the DCS (Dual Circulation Sub), a state-of-the-art downhole tool designed to revolutionize coiled tubing operations. Engineered for seamless integration into the borehole assembly (BHA), the DCS is typically installed just below the hydraulic disconnect, offering unparalleled flexibility and efficiency in managing downhole circulation. Here’s a comprehensive look at the DCS’s functionality, benefits, and why it's an indispensable tool for your operations. Key Features of the DCS (Dual Circulation Sub): Activation by Steel Ball: The DCS is activated by dropping a specific size steel ball inside the coiled tubing from the surface, which travels down to seat in the shifting piston, initiating the tool's function. Pressure-Activated Circulation: Once the ball seats, it blocks downward flow, causing pressure to build above the ball. Reaching a predetermined shear level cuts the shear screws, allowing the piston to move down and open the circulation holes. Burst Disc Feature for Lost Circulation: In scenarios where circulation through the coiled tubing is lost, and the activation ball cannot be pumped down, the DCS includes a burst disc. This disc bursts under specific pressure, opening a small circulation hole to the annulus and allowing for the activation ball to be circulated down. Enhanced Operational Flexibility: The DCS offers dual circulation paths, enabling operators to manage downhole conditions more effectively and maintain continuity in operations, even in challenging circumstances. Elevate your coiled tubing operations with the DCS (Dual Circulation Sub) from Marlin Oil Tools, a leading-edge downhole tool designed for optimal fluid management and operational efficiency in the oil and gas sector. Featuring an innovative activation mechanism via a steel ball and a pressure-activated system for opening circulation holes, the DCS ensures reliable control over downhole fluid dynamics. With the added burst disc feature for overcoming lost circulation challenges, the DCS enhances operational flexibility and safety, making it a vital component of any BHA during coiled tubing interventions. Choose the DCS for a robust solution to maintaining effective circulation and operational integrity under varying downhole conditions. Why Choose the DCS from Marlin Oil Tools? Innovative Activation Mechanism: Simplifies operations with a steel ball drop method for tool activation. Dual Circulation Capability: Offers versatile circulation options to adapt to changing downhole conditions. Safety and Efficiency in Lost Circulation: The burst disc feature provides a fail-safe option for maintaining circulation. Operational Continuity: Ensures uninterrupted operations, even in challenging downhole environments. The DCS (Dual Circulation Sub) by Marlin Oil Tools represents the cutting edge in coiled tubing technology, providing operators with the tools necessary to achieve safer, more efficient, and flexible downhole operations. Incorporate the DCS into your coiled tubing operations to experience improved operational outcomes and enhanced control over well intervention processes.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Seamlessly Send Funds Back Home

Personal FX Services

Empowering Financial Freedom: Repatriate Funds with Dunbridge Financial's Personal Services Life as an expat or immigrant can be both exciting and challenging, but managing financial commitments across borders shouldn't be one of your worries. At Dunbridge Financial, we understand the importance of repatriating funds to support your loved ones or make essential purchases back home. Our Personal Services are tailor-made to ensure a seamless and secure process, allowing you to focus on what matters most. Repatriation of Funds - Your Bridge to Home Whether you're an expat making purchases back home or sending money to support your family, Dunbridge Financial is here to be your reliable bridge to home. Our services make it easy for you to repatriate funds with confidence and efficiency. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Repatriate Funds with Ease Don't let international financial transactions be a burden. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you're an expat making purchases back home or supporting your family, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Repatriate funds with confidence and ease, knowing that you have a trusted partner by your side.

Service

Made to Order

Service

New

ISO

Air Freight


Safe-T-Whip Rentals

Restraint Rentals

Discover the Convenience of Safe-T-Whip Equipment Rental: Your Hassle-Free Solution At Safe-T-Whip & Restraints Inc., we understand the ever-changing needs of your oilfield projects. That's why we are thrilled to offer our top-of-the-line Safe-T-Whip restraints on rental, providing you with a maintenance-free, certified, and budget-friendly solution. Maintenance-Free Peace of Mind: Say goodbye to the hassles of maintenance and inspections. With Safe-T-Whip equipment rental, you'll receive a full line of pre-inspected and certified restraints, ready to tackle the challenges of your projects. Focus on your core operations, while we take care of the safety aspect for you. Try Before You Commit: Not sure if the Safe-T-Whip system is right for your project? Our equipment rental option is perfect for trying out the system before making a long-term commitment. Discover the benefits and efficiency of our restraints firsthand. Flexibility for Short-Term Projects: Short-term projects demand flexibility, and we've got you covered. Our rental service caters to projects of any duration, allowing you to equip your site with top-notch safety restraints for the required timeframe, without long-term commitments. Certified Installation or In-House Training: As part of our turn-key project services, our team of certified installers can assemble the entire Safe-T-Whip system for you, ensuring everything is in place for optimal safety. Alternatively, we offer comprehensive training to one of your own team members through our Safe-T-Whip certification process, empowering them to assemble or disassemble the system on demand. Nationwide Availability: Easy access to our safety solutions is our top priority for you. Safe-T-Whip equipment rental is available throughout Canada, either directly from Safe-T-Whip & Restraints Inc. or through our approved and certified suppliers. No matter where your project is located, we've got you covered. Tailored Solutions for Your Needs: Every project is unique, and so are our rental plans. Let us know your project requirements, and we'll work closely with you to provide the best-suited solution, ensuring the fastest and easiest way to secure the required number of restraint lengths, no matter the project's size. Safety Simplified: Safe-T-Whip equipment rental offers a simplified approach to safety, empowering you to focus on your operations with the confidence that your workforce is protected by the industry's best restraint system. Contact us today and explore the world of convenience and safety with Safe-T-Whip & Restraints Inc. Let us take care of your safety needs while you focus on what you do best - running a successful oilfield operation.

Rental

Made to Order

Service

New

API

Air Freight


HDI M100 Pressure Gauge

Electronic Pressure Gauge

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Service

Tempory Sold Out

Service

New

API

Air Freight


WR-SCSSSV FRN 2-7/8 inch

WR-SCSSSV FRN

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Wire Brush for Slickline

Downhole Tools

Achieve Superior Wellbore Cleanliness with HOCA Oil Tools' Wire Brush In the demanding realm of oil and gas extraction, the cleanliness and integrity of wellbores are paramount for operational success. Recognizing this critical need, HOCA Oil Tools has developed a premier solution: the Wire Brush, an essential component of our comprehensive downhole slick line tools portfolio. Designed to tackle the toughest wellbore contaminants, our Wire Brush is engineered for excellence, ensuring your operations maintain peak efficiency and safety. HOCA's Wire Brush: Pioneering Downhole Cleanliness At HOCA Oil Tools, we understand that every downhole environment poses unique challenges. That's why our Wire Brush is meticulously crafted to remove deposits, scale, and other obstructions with unmatched efficiency. Constructed from durable materials capable of withstanding harsh downhole conditions, the HOCA Wire Brush is your ally in maintaining wellbore integrity and optimizing production flow. Elevating Downhole Maintenance with HOCA Oil Tools Innovation, quality, and customer satisfaction are at the core of HOCA Oil Tools' mission. Our Wire Brush exemplifies these values, providing a solution that not only meets but exceeds the demands of modern downhole operations. With the HOCA Wire Brush, operators can expect a level of cleanliness and efficiency that sets new industry standards. Adopting the HOCA Wire Brush into your downhole cleaning regimen is an investment in your operation's future. It signifies a commitment to operational excellence, safety, and cost-effectiveness. Our dedicated team at HOCA Oil Tools is committed to supporting your success by providing superior downhole solutions that address the specific challenges of the oil and gas industry. Embrace the future of downhole maintenance with HOCA Oil Tools’ Wire Brush – your solution for maintaining pristine wellbores and maximizing operational outcomes. Experience the difference that comes with using tools crafted for excellence and backed by an unwavering commitment to your operational success. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Wire Brush to keep their operations running smoothly, safely, and efficiently.

Buy

In Stock

Product & Service

New

API

Air Freight


Cloud Based Solutions

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation.

Service

Made to Order

Service

New

ISO


Safe-T-Whip Equipment Recertification

Annual Re-certification

Annual Recertification Made Easy with Safe-T-Whip & Restraints Inc. At Safe-T-Whip & Restraints Inc., we understand the importance of maintaining the highest safety standards in the oilfield industry. That's why we offer a hassle-free and cost-effective Annual Recertification process for our soft rope restraints, ensuring that your equipment remains in peak condition and compliant with safety regulations. Convenient Shipping and Inspection: Our lightweight Safe-T-Whip Restraint system makes shipping to our recertification centers easy and inexpensive. Once received, each restraint undergoes a thorough inspection process, including visual checks and strength testing. This rigorous evaluation guarantees that your restraints are in top-notch condition to continue their crucial safety role. Serialized Registered Documentation: During the recertification process, each restraint is provided with serialized registered documentation. This ensures that every individual restraint is accounted for and easily identifiable. With our comprehensive database, we keep track of each restraint's purchase date and recertification status, giving you complete peace of mind and a reliable record for compliance purposes. Safety-First Inspection Tags: After successfully completing the recertification process, each restraint is equipped with a heavy-duty vinyl inspection tag. The tag is stamped with the new inspection date and securely zip-tied to the restraint. This safety tag serves as a visual indicator to safety inspectors that the restraint has been recertified, contributing to a safer work environment. Documentation Backup and Quick Access: We understand that maintaining documentation can be a challenge on-site. That's why Safe-T-Whip & Restraints Inc. takes the responsibility off your shoulders. We keep all recertification data securely backed-up, ensuring you have easy access to certificates and records whenever needed. Effortless Compliance: With our recertification process, you can be confident in meeting safety compliance requirements effortlessly. Our team is always available to assist with any queries, and should compliance or safety inspectors require it, we can quickly reissue certificates to help you stay compliant and on track. Choose Safe-T-Whip & Restraints Inc. for seamless and reliable Annual Recertification. Our dedication to safety and efficiency ensures that your safety restraints are always up to the task, providing you with peace of mind and full backup. Contact us today to schedule your Annual Recertification and experience safety without compromise.

Service

Made to Order

Service

New

API

Air Freight


Bomb Hanger Running Tool

Downhole Tools

Elevate Your Downhole Operations with HOCA Oil Tools' Bomb Hanger Running Tools In the intricate and demanding environment of downhole operations within the oil and gas industry, precision, reliability, and safety are paramount. HOCA Oil Tools, a leader in innovative downhole slick line tools, presents its Bomb Hanger Running Tools, specifically designed to enhance the deployment and retrieval of downhole gauges and instruments, commonly referred to as "bombs" in the industry. These specialized tools are critical for ensuring the accurate collection of downhole data, a vital aspect of well diagnostics and optimization. HOCA's Bomb Hanger Running Tools: Precision at Every Depth The Bomb Hanger Running Tools from HOCA Oil Tools are engineered to facilitate the secure placement and retrieval of downhole pressure and temperature recording devices. Designed with precision and manufactured from high-grade materials, these tools stand up to the rigors of the downhole environment, ensuring that critical data collection devices are accurately positioned within the wellbore for optimal performance and data integrity. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are dedicated to advancing the capabilities of the oil and gas industry through our innovative and reliable downhole solutions. Our Bomb Hanger Running Tools epitomize this dedication, offering a solution that not only meets but exceeds the demanding requirements of modern well diagnostics. Incorporating our Bomb Hanger Running Tools into your downhole toolkit is a step towards enhanced operational efficiency, accuracy, and safety. With HOCA Oil Tools, you gain more than a product; you acquire a partner committed to your success, providing advanced solutions and expert service tailored to your unique downhole challenges. Choose HOCA Oil Tools for your Bomb Hanger Running Tool needs and elevate your downhole operations to new levels of efficiency and accuracy. Partner with us and unlock the full potential of your well diagnostics and optimization efforts. With HOCA Oil Tools, you're investing in more than just equipment; you're investing in the future of your downhole operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Labeling machines Leasing

Enhance Your Product Labeling with Labelling Machine Leasing from CWB National Leasing Revolutionizing Your Packaging Process with Advanced and Flexible Equipment Solutions In the competitive world of retail and manufacturing, having efficient and reliable labelling machines is crucial for maintaining product integrity and brand consistency. Leasing labelling machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to improve their packaging process. Here’s how leasing labelling machines can benefit your business: 1. Quick Access to Advanced Labelling Technology CWB National Leasing understands the need for efficient packaging solutions in your business. They offer a fast leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This efficiency ensures that your labelling machines can be delivered and operational quickly, enhancing your production line and reducing packaging bottlenecks. 2. Increased Financial Flexibility Leasing labelling machines with CWB National Leasing enhances your buying power. It allows you to spread costs over manageable periodic payments instead of a significant upfront purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your labelling machines for a small payment increase enables customization to meet specific packaging needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your labelling machines start contributing to your business’s revenue while they're being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with seasonal variations in demand, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing labelling machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease labelling machines through CWB National Leasing is a strategic decision that equips your business with essential packaging tools while maintaining financial agility. It ensures access to high-quality labelling technology, vital for efficient product packaging and branding, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved packaging quality, and increased competitiveness in the market, helping your business thrive in today’s dynamic business environment.

Service

In Stock

Service

New

ISO


Hydrogen Solutions

Hydrogen

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Buy

In Stock

Product & Service

New

ANSI

Land Freight


Power System Stability

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Empowering Power System Stability for a Resilient Future Step into a new era of power system stability with ELEKS. Our energy software development solutions empower you to monitor and manage your power systems in real-time, ensuring accuracy, reliability, and financial security. Collaborate with our team of energy software development experts to create custom energy management software solutions that automate stability analysis and optimize load flow calculation for unparalleled efficiency. Elevate Your Power System Stability with ELEKS Energy Software Development: Embrace cutting-edge energy management software solutions that redefine the way you approach power systems. Enhance productivity, accessibility, safety, and sustainability across your business power ecosystem. Real-Time Monitoring and Management: Our solutions enable real-time monitoring and management of your power systems, ensuring accuracy and reliability across your entire power infrastructure. Avoid errors and financial losses with automated stability analysis and optimized load flow calculation. Custom Solutions Tailored to You: Collaborate with ELEKS to develop custom energy management software solutions that align precisely with your business needs. Our experts craft solutions that optimize stability, efficiency, and overall power system performance. Why Choose ELEKS? Unleash Efficiency: Experience the power of automation with our energy management solutions. Streamline stability analysis and load flow calculations to enhance overall efficiency and reduce manual errors. Expertise That Matters: With a rich legacy spanning thirty years, ELEKS brings a wealth of expertise to the energy software development arena. Trust our team of specialists to understand and address your unique power system challenges. Cutting-Edge Technologies: Our solutions are powered by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace a future of unparalleled power system stability. Empower a Resilient Future: In a world that demands accuracy, reliability, and sustainability, ELEKS' energy software development solutions empower you to meet these challenges head-on. Future-proof your power systems with ELEKS. Join the Energy Revolution with ELEKS Revolutionize your power system stability and elevate your energy management with ELEKS. Our energy software development solutions are designed to propel your business into a future of resilience and reliability. Embrace innovation – choose ELEKS to lead the way into a brighter, more stable energy future.

Service

Made to Order

Service

New

ISO


Internet of Things Specialization

Integrating IoT Capabilities into the Oil and Gas Sector with Nulux Network Solutions In the perpetually evolving landscape of the oil and gas industry, the adoption and integration of Internet of Things (IoT) technologies have become pivotal in navigating through the complex, dynamic, and critical operational scenarios. Nulux Network Solutions, drawing from its extensive proficiency in wireless systems and infrastructure, proudly extends its specialization in IoT, ensuring that your operations are not merely efficient but are resonating with the rhythm of technological advancement. Why IoT in the Oil and Gas Industry? The infusion of IoT into the oil and gas sector amplifies operational intelligence, providing real-time data, optimizing processes, enhancing safety protocols, and significantly reducing operational costs. From remote monitoring, predictive maintenance, automated safety checks, to data-driven decision-making, IoT stands out as the bridge connecting the physical and digital realms of your operations. Nulux - Your Beacon into the IoT Universe Navigating through the intricate world of IoT, Nulux emerges as your ally, ensuring that your step into the IoT universe is stable, secure, and symbiotic with your operational dynamics. Our IoT Specialization encapsulates: Device Integration: Ensuring that sensors and devices are seamlessly integrated into your operations, capturing pivotal data points from every nook and corner of your processes. Data Analytics: Utilizing data harvested from various IoT devices, our systems facilitate astute analytics, enabling you to draw actionable insights, and thereby, enhancing operational decision-making. Security: In the IoT sphere where data is omnipresent, we enforce rigorous security protocols ensuring that every byte of information is shielded against potential cyber threats. Harnessing Nulux’s Wireless Prowess in IoT Implementation Implementing IoT is not just about embedding sensors; it's about ensuring that the data travels securely and reliably to where it's needed. Harnessing our profound expertise in wireless communication technologies, such as point-to-point and multipoint line configurations, we ensure that your IoT devices are not isolated islands but are communicatively interconnected, facilitating a continuous flow of data. Point to Point Configurations for Direct, Secure, and Reliable Data Transmission between two nodes, ensuring that critical data is transmitted securely and without loss. Multipoint Configurations enabling data transmission across multiple points, ensuring that your IoT network is expansively interconnected. Elevate Operational Intelligibility with Nulux IoT Imagine a world where your operational decisions are backed by real-time data, where predictive maintenance mitigates unplanned downtimes, and where your safety protocols are automated and perpetually vigilant. With Nulux's IoT specialization, this isn’t a distant dream but an achievable reality. Our solutions are meticulously crafted, considering the unique challenges and needs of the oil and gas sector, ensuring that your step into the world of IoT is not just progressive but is also coherent with your operational nature and future aspirations. Future-Proof Your Operations with Nulux Embark on a journey where every operational element is interlinked, every decision is data-driven, and every process is optimized through the intelligent, secure, and reliable integration of IoT into your operational fabric. With Nulux Network Solutions, step into a future where your operations are not just managed but are intelligently orchestrated, ensuring safety, efficiency, and a perennial evolution alongside technological advancements. Engage with Nulux, and let’s sculpt a future where your operations echo with intelligence, security, and unparalleled efficiency.

Service

In Stock

Service

New

ISO


3-1/2 inch K Storm Choke

K Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


ImplosionStixx by StimStixx

ImplosionStixx

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here.

Buy

In Stock

Product & Service

New

API

Air Freight


MIG Spool Gun CST251

Aluminum Welding Spool Gun

Introducing the Canaweld MIG Spool Gun CST251: Your Ultimate Solution for Precise Aluminum Welding When it comes to welding aluminum, achieving a stable arc and reliable feed is crucial for success. Meet the Canaweld MIG Spool Gun CST251, a game-changing accessory designed to enhance the "feed ability" of aluminum and other challenging wires, providing welders with exceptional control and precision. Unleash the Power of Aluminum Welding - Experience Unmatched Feeding Performance The Canaweld CST251 Spool Gun revolutionizes the welding experience with its short feed distance, offering a steady, reliable feed of soft aluminum wire. This pistol-grip style spool gun houses a compact 1 lb. 1/4-inch diameter spool of wire, delivering the perfect solution for feeding difficult wires like aluminum through the standard MIG gun. Experience Efficiency and Reliability - Designed for Excellence The CST251 spool gun is a lightweight, well-balanced semi-automatic gun with dual groove drive rolls and a heavy-duty all-metal wire feeder. Setting up the spool gun is a breeze, ensuring welders can quickly and efficiently achieve exceptional aluminum wire feeding with a variety of CV power sources and engine-driven welders. Remarkable Features that Make a Difference Let's explore the outstanding features of the Canaweld MIG Spool Gun CST251: 1. Multiple Processes: The CST251 is suitable for MIG (GMAW), Pulsed MIG (GMAW-P) with pulsing power sources, and FCAW, providing versatility for a wide range of welding applications. 2. Wire Types: Designed to handle aluminum, steel, and flux-cored wire, the CST251 is the ultimate companion for welding various materials with ease. 3. Industrial Applications: From trucks, trailers, and railcars to aerospace hardware, boat/yacht building, and recreational vehicles, the CST251 excels in diverse industrial applications. 4. Precision Welding: Perfect for automotive/motorcycle frames, sports products like scooters and bicycles, furniture, ladders and frames, ship decks, sign manufacturers, and general repair and maintenance. 5. Easy Maintenance: The CST251 features easy access to the drive assembly, reducing service time, and allowing routine maintenance without disassembling the gun. Elevate Your Welding with Canaweld MIG Spool Gun CST251 At Canaweld, we are dedicated to empowering welders with cutting-edge solutions that enhance their productivity and performance. The CST251 Spool Gun is a testament to our commitment to excellence, providing welders with the tools they need to achieve precise and reliable aluminum welding in diverse industrial settings. Experience the difference of seamless aluminum wire feeding with the Canaweld MIG Spool Gun CST251 - Your Ultimate Solution for Precision Welding!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts.

Service

In Stock

Service

New

ISO


X-Span bridge plug - BPX-SPAN

Bridge Plug

Introducing the BPX-SPAN, the elastomer-free bridge plug designed to withstand even the toughest well conditions. With the use of our patented metal to metal X-SPAN seal technology, the BPX-SPAN provides a mechanical seal and anchor to the casing wall, making it a great solution for wells that cause elastomers to swell on standard bridge plugs while running in the hole. The BPX-SPAN has a short design for quick removal and is capable of setting in any grade casing, including P-110. It also boasts a range of optional equipment, including a ceramic knock out sub, pump out sub, burst disc, tailpipe assembly with profile subs, and a velocity string, making it a versatile system for any well application. Unlike standard bridge plugs that can have exposed elastomers to create a seal to the casing wall, the BPX-SPAN's sealing element utilizes a metal to metal seal that bonds and seals to the casing wall, ensuring a reliable seal that won't fail during run-in and setting. With no moving parts, slips, shear screws, or set screws, you can trust the BPX-SPAN to provide a long-lasting solution for temporary or permanent service. Please note that for bridge plug applications, our published pressure ratings may not apply to the system, as those ratings are based on collapse and burst pressure ratings. However, with a rating of over 550°F, you can trust the BPX-SPAN to withstand even the harshest well conditions. If you have any questions about the BPX-SPAN or any other ID OILTOOLS system, please contact our Tech Services department for assistance. Choose the BPX-SPAN for a reliable, elastomer-free solution for all your well application needs.

Buy

In Stock

Product & Service

New

API

Sea Freight


Home Country Tax Payments for Expats

Personal FX Services

Stay Committed to Your Home Country with Dunbridge Financial's Personal Services: Simplify Tax Payments Life can take us to different corners of the world, but it's essential to stay connected to our home country and fulfill our commitments, especially when it comes to tax payments. At Dunbridge Financial, we understand the importance of keeping your home country obligations up to date, and that's why we offer Personal Services tailored to your specific needs, including hassle-free tax payments. Ensure Your Home Country Commitments with Ease Paying taxes to your home country while living abroad can be a daunting task. But with Dunbridge Financial, it's a breeze. Our streamlined services enable you to fulfill your tax responsibilities promptly and securely, no matter where you are in the world. Stay committed to your financial duties and gain peace of mind knowing that your tax payments are in safe hands. Experience Our Personal Services At Dunbridge Financial, we believe in providing services that make managing your personal finances simple and stress-free. Here's what sets us apart: 1. Live Rates with No Hidden Fees Transparency is the foundation of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and ensure that you're making the most out of your money. 2. Security is Our Priority The security of your funds and data is of utmost importance to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your finances are managed with the highest levels of safety and security. Enjoy peace of mind knowing that your financial transactions are protected. 3. Easy to Use, Easy to Save Managing your finances shouldn't be complicated. With Dunbridge Financial, it's as simple as can be. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your trusted partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for seamless and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Simplify Your Tax Payments Don't let tax payments be a source of stress. Join Dunbridge Financial today and experience a world of ease, convenience, and security when it comes to managing your personal finances. Whether you're making tax payments to your home country or sending money to loved ones abroad, we are here to make your financial journey a breeze. Simplify your tax payments with Dunbridge Financial. Sign up now and embrace a worry-free, well-connected financial experience.

Service

Made to Order

Service

New

ISO

Air Freight


Geothermal

Revolutionizing Geothermal Well Interventions: InWaTec Combined's Mini-Coil Services In the dynamic world of geothermal energy production, where the efficient management of well interventions is paramount, InWaTec Combined is pioneering with our Mini-Coil Services. Designed to navigate the unique challenges of geothermal wells, our Mini-Coil Tubing offers a versatile and high-pressure tolerant solution for fluid placements and well stimulation. Geothermal wells demand a delicate balance between precision and strength. Our Mini-Coiled Tubing services are tailored to meet these needs, providing an ideal solution for the small quantity placements of fluids that are often required in geothermal operations. Whether it's for precision acidizing, scale removal, or other chemical treatments, the Mini-Coil is an invaluable tool. Compact Power: Our Mini-Coiled Tubing is compact yet robust, designed to handle the high pumping pressures needed for effective interventions in geothermal wells. Its smaller diameter does not compromise its ability to withstand intense conditions underground. Efficiency in Production: Lifting wells into production efficiently is crucial for maintaining the economic viability of geothermal operations. The Mini-Coil facilitates this by enabling operators to deliver targeted treatments and interventions that can revitalize well performance. Tailored to Geothermal Needs: While traditional coiled tubing operations may be limited by flow and snubbing capabilities, our Mini-Coil Tubing is engineered to overcome these constraints, providing enhanced pressure handling that is especially beneficial in the high-temperature, high-pressure environments characteristic of geothermal wells. It's true that Mini-Coil Tubing has its limitations regarding flow and snub, but what it offers in return is the capacity to handle significantly higher pumping pressures. This attribute is particularly advantageous in geothermal applications where the subsurface conditions can be extreme. InWaTec Combined's commitment to innovation is further demonstrated by the integration of advanced monitoring technologies that accompany our Mini-Coil Services. Real-time data acquisition allows for precise control and assessment of the intervention process, ensuring that operations are not only successful but also conducted with an emphasis on safety and sustainability. In the realm of geothermal energy, where the right interventions can drastically enhance the output and longevity of wells, InWaTec Combined's Mini-Coil Services emerge as a clear choice for operators seeking to optimize their wells. Our services are a testament to our dedication to providing solutions that are both efficient and effective, reducing downtime and maximizing production. Partner with InWaTec Combined for your geothermal well needs and experience the next level of well intervention services. Let our Mini-Coil Tubing unlock the full potential of your geothermal operations, where precision meets power, and innovation drives production.

Service

In Stock

Service

New

API

Land Freight


Slickline Rope Socket

Rope Socket

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide.

Buy

In Stock

Product & Service

New

API

Air Freight


On-Line Safe-T-Whip Training

Restraint Training

Safe-T-Whip e-Learning: Safety Training at Your Fingertips At Safe-T-Whip & Restraints Inc., we believe that safety training should be accessible and convenient, regardless of geographical constraints. That's why we are proud to offer our comprehensive safety training courses in an e-Learning format, allowing your team to learn at their own pace, anytime, anywhere. Flexibility Meets Safety: We understand that the oilfield industry operates on tight schedules and unpredictable conditions. While a hands-on approach is always ideal for learning, we recognize that it may not always be feasible due to distance and timing constraints. That's where our e-Learning courses come in, bridging the gap between safety training and the practicalities of the field. Comprehensive Online Courses: Our e-Learning platform offers two comprehensive courses tailored to meet your specific needs: 1. Anchors and Whips Course: This course covers all aspects of handling anchors and whips, ensuring your team is equipped to use them safely and effectively. 2. Continuous Flow-lines Course: For those dealing with continuous flow-lines, this course provides in-depth knowledge on their proper use and linkage, ensuring maximum safety during operations. Safety Certificate for Success: Upon completing our e-Learning course, your team members will undergo a final test to assess their understanding and proficiency. Those who pass the test will receive a Safety Certificate, recognizing their successful completion of the training program. Wallet Cards for Your Convenience: To further support the safety commitment of your personnel, we provide registered wallet cards to individuals who successfully complete the e-Learning course. These wallet cards serve as tangible reminders of their qualification and commitment to safety excellence. The Future of Safety Training: With Safe-T-Whip e-Learning, we bring safety training to the palm of your hand. No matter where your team is located, they can access our high-quality training content and gain the expertise they need to handle our safety restraints with confidence. Choose Safe-T-Whip & Restraints Inc. for cutting-edge safety solutions and convenient e-Learning options. Together, we build a safer future for the oilfield industry. Contact us today to enroll your team in our e-Learning safety training courses and take the first step towards a safer and more secure work environment. Safety is just a click away!

Service

Made to Order

Service

New

API

Air Freight


Shelving Leasing

Optimize Your Storage Solutions with Shelving Leasing from CWB National Leasing Streamlining Your Space Management with Flexible and Economical Equipment Leasing For businesses in retail, warehousing, or any sector that requires efficient space management, robust and versatile shelving systems are crucial. Leasing shelving through Canadian Western Bank (CWB) National Leasing provides a smart, adaptable, and financially sensible solution to enhance your storage and organization capabilities. Here’s how leasing shelving can benefit your business: 1. Rapid Equipment Accessibility CWB National Leasing understands the need for efficient space management in your business operations. They offer a quick leasing process, typically providing decisions within 48 hours of application submission. This ensures that your shelving systems can be delivered and operational quickly, enhancing your storage capabilities without significant delays. 2. Enhanced Financial Flexibility Leasing shelving with CWB National Leasing boosts your buying power. By opting for periodic payments over a large upfront purchase, you free up capital for other critical business needs. Additionally, the option to add extra features or accessories to your shelving systems for a small payment increase allows for customization to meet your specific storage requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your shelving systems start contributing to your business’s efficiency while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing shelving can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease shelving systems through CWB National Leasing is a strategic decision that provides your business with essential storage solutions while maintaining financial agility.

Service

In Stock

Service

New

ISO


Streamlined International Payments and Receipts

Foreign Exchange Business Services

Expand Your Global Business Horizons with Dunbridge Financial: Streamlined International Payments and Receipts As a thriving global business, you understand the importance of efficient and cost-effective international transactions. Say goodbye to complexities and uncertainties with Dunbridge Financial's comprehensive Business Services. We empower you to take advantage of foreign exchange opportunities, manage multiple currencies effortlessly, and benefit from personalized concierge customer service. One Platform, Limitless Possibilities At Dunbridge Financial, we believe in simplifying your international business operations. Our elegant platform is designed to cater to all your needs, from collecting and managing foreign currencies to making secure international payments. Embrace the convenience of handling your global finances from a single platform, eliminating the need for multiple systems. Concierge Customer Service - Your Dedicated Business Partner Our commitment to customer satisfaction goes beyond transactional interactions. With Dunbridge Financial, you get more than just a service; you gain a dedicated business partner. Experience how we embed with our customers to understand their unique needs and develop a tailored payment strategy that suits your business objectives. Each customer is assigned a dedicated account manager, ensuring that you receive personalized support every step of the way. Fast and Secure International Payments Speed and security are the cornerstones of our international payment services. Benefit from our global banking relationships, allowing you to make cost-effective payments to over 100 currencies and 120 countries. Rest assured that your financial information is safeguarded with our market-leading platform, compliant with ISO27001. Multi-Currency Accounts for Seamless Transactions Managing multiple currency balances has never been easier. With Dunbridge Financial, you can receive and manage funds in your company's name, all within a single account. Enjoy the convenience of receiving like a local with real accounts featuring IBAN, ACH, and SEPA capabilities. When needed, effortlessly transfer funds between currencies, maximizing your financial flexibility. Mass Payments - Efficiency at Its Finest Time is money, and we value both for your business. Our Mass Payments feature allows you to upload, manage, and pay up to 1000 payees at a time. Streamline your Accounts Payable processes, saving time and effort while ensuring accuracy and promptness in every transaction. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider; we are your dedicated partner in driving your international business growth. When you choose us, you gain access to: • Expert guidance and personalized support from our dedicated account managers • Secure, compliant, and efficient global banking relationships for seamless transactions • Cutting-edge technology that simplifies complex financial processes Join Us Today and Embrace Global Business Success Unlock the full potential of your global business with Dunbridge Financial. Sign up for your free global business account within 24 hours and experience the ease of managing all your international payments and receipts from one elegant platform. Take the complexity out of your FX payment strategy, optimize your financial efficiency, and elevate your international business endeavors with confidence. Empower your global business horizons with Dunbridge Financial. Sign up now and open the door to a world of limitless possibilities. Take your business to new heights with streamlined international transactions, personalized customer service, and unwavering financial support.

Service

Made to Order

Service

New

ISO

Air Freight


Thru-Tubing MatrixStixx 2 inch

Acid Stick 2 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success!

Buy

In Stock

Manufacturer

New

API

Sea Freight


CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them.

Service

In Stock

Service

New

API

Land Freight


Heaters Leasing

Optimize Your Construction Site with Heater Leasing from CWB National Leasing Enhance Worksite Comfort and Efficiency with Tailored Leasing Solutions In the construction industry, maintaining a comfortable and safe working environment is crucial, especially in colder climates or during winter months. Construction heaters are essential for these conditions. Leasing construction heaters through Canadian Western Bank (CWB) National Leasing provides a flexible, cost-effective, and efficient solution for your business. Here’s how leasing construction heaters can benefit your construction projects: 1. Rapid Equipment Delivery CWB National Leasing prioritizes the efficiency of your operations. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your construction heaters can be delivered and operational swiftly, minimizing downtime and enhancing worksite productivity and comfort. 2. Increased Financial Flexibility Leasing construction heaters with CWB National Leasing boosts your financial agility. Choosing periodic payments over a large upfront purchase frees up capital for other vital aspects of your project. Additionally, the option to add extra features or accessories to your heaters for a small payment increase allows for customization to meet specific site needs. 3. Effective Cash Flow Management With smaller lease payments over the term, your construction heaters begin to contribute to your project’s efficiency while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for the financial health and growth of your business. 4. Flexible Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is especially beneficial for construction projects with varying timelines and budgets, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing construction heaters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It’s advisable to consult with a tax advisor to explore how leasing can enhance your business’s tax position. Conclusion Choosing to lease construction heaters through CWB National Leasing is a strategic decision that equips your construction site with essential heating solutions while maintaining financial flexibility. It ensures access to high-quality heaters, vital for maintaining a safe and comfortable working environment, without the financial burden of a large upfront investment. This leasing approach enables enhanced site efficiency, worker comfort, and increased productivity, helping your construction projects to progress smoothly and efficiently.

Service

In Stock

Service

New

ISO


TIG AC/DC 201 Pulse-D

TIG Welder

Achieve Precision and Perfection with the TIG AC/DC 201 Pulse D Welding Machine At Canaweld, we understand that precision and sleek design are paramount when it comes to welding in industries like marine, aerospace, and medical. That's why our wide range of TIG welders is meticulously designed to provide you with the utmost control necessary to achieve professional results with various parent metals. When excellence is your standard, trust Canaweld to deliver the welding solutions you need. Introducing the TIG AC/DC 201 Pulse D - Your Powerful Ally The TIG AC/DC 201 Pulse D stands as a powerful, portable, and versatile welding machine that embodies innovation and excellence. Capable of both AC and DC TIG welding on stainless steel, mild steel, and aluminum, as well as Stick welding, this unit offers unmatched versatility for welders who demand the best. The Pulse of Precision Welding The pulse features of the TIG AC/DC 201 Pulse D, combined with the HF start, make it the ultimate choice for welders seeking high-quality TIG welds, even on the thinnest materials, without any distortion. This machine sets new standards in welding performance, empowering you to tackle challenging projects with confidence and finesse. Exemplary Features for Superior Results The TIG AC/DC 201 Pulse D is equipped with an array of features that elevate your welding experience: • AC/DC capabilities, including all pulse parameters of a TIG welding machine, offering maximum versatility for various welding tasks. • Rigorously tested in (104°F/40°C) to ensure optimal performance even in the toughest conditions, so you can weld with confidence in any environment. • Excellent welding quality on aluminum, stainless steel, and other materials, providing professional-grade results every time. • The ability to weld very thin materials, especially aluminum, with precision and without compromising on quality. • Digital control of all welding parameters, including pre-flow, starting current, slope-up, welding current, base current, pulse duration, pulse frequency, slope-down, crater arc current, post-flow, AC frequency, AC balance, and more, giving you complete control over your welding process. • Generator compatible design for flexibility and adaptability in various worksites. • Excellent welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Digital ammeter and Hold Function of the last read value, ensuring accurate parameter monitoring and adjustment. • Automatic fan ensuring protection against overheating, saving energy, and keeping dust and debris away from the machine, enhancing its durability and performance. • Adjustable Arc Force in Stick mode, allowing you to fine-tune your welding experience for exceptional results. • Durable metal face panel, ensuring longevity and safeguarding your investment. Your Welding Excellence, Our Commitment At Canaweld, we stand by the quality and reliability of our products. That's why the TIG AC/DC 201 Pulse D comes with a comprehensive 3-year warranty, providing you with peace of mind and assurance in your welding endeavors. Elevate Your Welding Standards with Canaweld The TIG AC/DC 201 Pulse D is the epitome of precision and perfection in welding. Whether you work in the marine, aerospace, or medical industries or any other field where precision is crucial, this welding machine will exceed your expectations and deliver superior results. Invest in the welding machine that empowers you to achieve greatness. Choose the TIG AC/DC 201 Pulse D from Canaweld and experience welding like never before. Experience the pulse of precision welding and elevate your welding projects to new heights. Trust Canaweld for welding excellence. Make the TIG AC/DC 201 Pulse D your welding ally today. Unleash the power of precision welding with Canaweld.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Junk Basket - Valve Catcher

Downhole Tools

Elevate Downhole Cleanliness and Efficiency with HOCA Oil Tools' Junk Basket - Valve Catcher In the dynamic world of oil and gas extraction, maintaining a clean and functional wellbore is crucial for optimal operation and productivity. HOCA Oil Tools, as a specialist in downhole slick line tools, introduces the Junk Basket - Valve Catcher, an indispensable tool designed to enhance the integrity and efficiency of downhole operations. This innovative tool is specifically engineered to capture debris, ensuring your wellbore remains clear and operational. HOCA's Junk Basket - Valve Catcher: Your Solution to Downhole Debris Management The HOCA Junk Basket - Valve Catcher is meticulously crafted to provide a robust solution for capturing and removing all forms of downhole junk, including sand, perforation debris, and broken hardware. Its unique design allows for effective debris retrieval without hindering valve operations, making it an essential tool for maintaining well integrity. Constructed with high-grade materials, our Junk Basket - Valve Catcher withstands the harsh downhole environment, ensuring durability and reliability. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are committed to advancing the field of downhole operations with innovative, high-quality tools that address the specific challenges faced by the oil and gas industry. Our Junk Basket - Valve Catcher is a prime example of this commitment, offering a practical, effective solution for maintaining wellbore cleanliness and functionality. Incorporating the HOCA Junk Basket - Valve Catcher into your downhole operations signifies a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a partner dedicated to your success in the challenging world of oil and gas extraction. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Junk Basket - Valve Catcher to keep their operations running smoothly and efficiently. Partner with HOCA and transform your downhole challenges into successes.

Buy

In Stock

Product & Service

New

API

Air Freight


Re-perforating

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time.

Service

In Stock

Service

New

API

Land Freight


Lock Mandrel Running Tool

Downhole Tools

Maximize Your Downhole Success with HOCA Oil Tools' Running Tools for Lock Mandrels In the complex world of downhole operations, the necessity for precision, safety, and efficiency cannot be overstated. HOCA Oil Tools, a leader in providing advanced downhole slick line tools, introduces a range of Running Tools specifically designed for Lock Mandrels, ensuring seamless integration and operation in your wellbore activities. HOCA’s Running Tools for Lock Mandrels: Precision, Versatility, and Reliability Our Running Tools for Lock Mandrels are engineered with precision, crafted to deliver unmatched performance in downhole settings. These tools are essential for setting or positioning downhole flow controls and devices at predetermined depths efficiently and accurately. Designed for versatility, they accommodate various sizes and types of Lock Mandrels, ensuring compatibility and flexibility for different downhole requirements. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that set new standards in quality, efficiency, and reliability. Our Running Tools for Lock Mandrels are a testament to this commitment, designed to enhance your downhole operations and drive success. Incorporating our Running Tools into your downhole toolkit not only ensures optimal performance but also aligns your operations with the highest standards of precision and safety. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole success with innovative solutions and exceptional service. Choose HOCA Oil Tools’ Running Tools for your Lock Mandrels and elevate your downhole operations to new heights. Partner with us and experience the difference that precision engineering, reliability, and dedicated support can make in your wellbore activities. Embrace the future of downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency.

Buy

In Stock

Product & Service

New

API

Air Freight


Magna Range Bridge Plug

Bridge Plug, Magna Range

Introducing the Magna Range Bridge Plug from ID OilTools – the ultimate solution to passing restrictions and securely setting in larger tubing or casing. Our plug has been specially designed to handle differential pressures of up to 10,000psi at 350°F, making it the perfect choice for your downhole operations. Due to the extended setting range this plug has no pressure rating and as such the differential pressures are not guaranteed, even though the plug has passed several tests in these conditions. What sets our plug apart is its extended setting range, which allows it to pass through restricted I.D. tubing, saving you valuable time and money. With case-hardened slips above and below a three-piece nitrile rubber pack-off system, our plug is designed to maintain a constant sealing pressure. The slips are specially heat-treated to ensure a secure anchoring even in P-110 casing, with a hard outer layer for gripping and a soft inner layer for easier milling. To ensure centered setting of the small diameter plug in large I.D. pipe, our Magna Range Plug features ribbed cones that direct the slips to evenly spaced positions against the pipe. And should it be necessary to remove the plug after setting, a milling process is recommended as the plug is constructed of mild steel and is not considered drillable. Don't compromise on quality and reliability when it comes to your downhole operations. Choose the Magna Range Bridge Plug from ID OilTools, and experience the ultimate in performance and efficiency.

Buy

In Stock

Product

New

API

Sea Freight


Mesh Network Design and Installation

Pioneering Mesh Network Solutions for the Oil and Gas Industry: Nulux Leads the Way The oil and gas industry, characterized by its vast operations, challenging terrains, and the imperative for seamless communication, is a sector where reliable connectivity can make a profound difference. In this intricate web of operations, Mesh Network Design and Installation by Nulux Network Solutions emerges as the paramount solution for engineering professionals in the industry. Understanding Mesh Networks Unlike traditional Point-to-Point (P2P) or Multipoint configurations, mesh networks form a web of interconnected devices. Each node or device in this network is connected to multiple others, creating a network where information can take several paths to its destination. This interconnectedness ensures that even if one node fails, the network remains intact by rerouting data through other nodes, offering unparalleled reliability. Why Mesh Networks are a Game Changer for Oil and Gas Operations Robust Connectivity: Given the sprawling nature of oil and gas facilities, with sites spread across large geographic areas and often in remote locations, a mesh network ensures that there's no single point of failure. This robustness is crucial for operations where downtime can result in significant financial and operational setbacks. Scalability: As operations expand or evolve, mesh networks can be effortlessly scaled. With every new device acting as a node, the network becomes more resilient and extensive. Efficient Data Flow: With the capability to choose the quickest route for data transmission, mesh networks optimize the flow of information, ensuring timely decision-making and operational efficiency. Nulux's Expertise: Meshing Excellence with Experience Having an extensive background in various wireless infrastructures, Nulux Network Solutions has channeled its expertise into creating mesh network solutions that cater specifically to the challenges faced by the oil and gas industry. Customized Solutions: Recognizing that each operation is unique, our team tailors mesh network designs to align with the specific needs and challenges of each facility. End-to-End Service: From the initial design phase to the final installation, Nulux ensures that every aspect of the mesh network is handled with precision, ensuring optimal performance. Future-Ready: In an industry that's rapidly embracing digitization and smart technologies, our mesh networks are designed to be future-ready, compatible with emerging tech and capable of integrating with IoT devices and sensors. Driving Operational Efficiency with Wireless Solutions Beyond mesh networks, Nulux is committed to offering a comprehensive suite of wireless solutions. From designing Wireless Access Points (WiFi) that cater to bustling work environments to implementing secure and cost-effective Point-to-Point (P2P) networks, Nulux remains at the forefront of wireless tech, ensuring that the oil and gas sector is always one step ahead in its communication game. Conclusion In a sector where operational efficiency, safety, and timely decision-making are paramount, having a reliable communication network is non-negotiable. Nulux Network Solutions, with its cutting-edge Mesh Network Design and Installation services, offers the oil and gas industry a chance to revolutionize its communication infrastructure. Connect with us and let's chart a path to seamless connectivity together.

Service

In Stock

Service

New

ISO


SP TR Surface Controlled Subsurface Safety Valve 6-5/8 inch

SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


API-611 Steam Turbine

Single Stage Turbine

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Partnered with Logitech

Cybersecurity

ALCiT in Mississauga

Meer informatie

Revolutionize Your Meetings with ALCiT's Logitech Partnership Online meetings – we've all been there. The constant echo of 'Can you hear me?' and the perpetual mute button fiasco. Say goodbye to these frustrating hurdles, as ALCiT proudly partners with Logitech to bring you seamless Meeting Room Solutions that redefine how you connect, collaborate, and communicate. Experience Meetings Without Hassles At ALCiT, we understand that meetings should be about progress, not problems. That's why our partnership with Logitech is a game-changer. Whether it's a huddle room or a 30-seat conference, our solutions ensure that every meeting is a seamless interaction, allowing you to focus on the agenda, not the technology. Logitech: The Prestigious Tech Pioneer Since its inception in 1981, Logitech has stood as a beacon of innovation and reliability. With products spanning across the globe, Logitech's technology excels at uniting people regardless of distance. Now, ALCiT brings this excellence to your meeting spaces, transforming collaboration dynamics. Unveiling the Magic of Logitech Solutions MeetUp: Compact Brilliance: Small space, big ideas. MeetUp packs impressive features into a compact solution, catering to intimate conferences with crystal-clear audio and sharp video. Rally Camera: Ultra-HD Excellence: Experience brilliance like never before. Rally Camera delivers Ultra-HD imaging, vibrant colors, and optical accuracy that redefine video conferencing quality. Logitech Tap: Touch of Convenience: Empower your workspace with sleek touch control. Tap brings ease to online meetings, with silent operation and an always-ready motion sensor. H820e Headset: Noise-Canceling Revolution: Transform your conference experience with these noise-canceling headsets. With up to 10 hours of talk time and a wide range, your conversations become crystal-clear dialogues. Empower Collaboration, Erase Setup Frustrations ALCiT and Logitech share a common goal – to enhance collaboration and streamline communication. Our Meeting Room Solutions reduce setup complexities and save you precious time. The best part? These solutions seamlessly integrate with your existing services, ensuring a smooth transition. Seamless Meetings: A Click Away ALCiT's partnership with Logitech redefines meetings – from frustrating fumbles to seamless experiences.

Service

Made to Order

Service

New

ISO


Custom Application Development Services

Software Development

Eleks in Toronto

Meer informatie

Unleash Innovation and Elevate Your Business with ELEKS' Custom Application Development Services In today's dynamic business landscape, having a cutting-edge software solution that caters to your unique needs is no longer a luxury – it's a strategic necessity. ELEKS, a leader in the software engineering industry, offers a comprehensive suite of custom application development services that empower you to bring your boldest software visions to life. Our end-to-end approach ensures that your business stays ahead of the curve, delivering an exceptional user experience that sets you apart from the competition. Transforming Visions into Reality: How We Can Help You At ELEKS, we understand that every software vision is unique. Our custom application development service is designed to assist you in every step of your journey, from idea inception to implementation. Here's how we'll make a difference for you: 1. Validating Your Vision We kick-start your application development process with product design workshops that help shape your concepts and validate your ideas through data-led product design. Our Proof of Concept (PoC) development enables you to explore and invest in ideas that hold real business value, ensuring that your efforts are directed towards solutions with a high potential for success. 2. Innovating and Competing Innovation is at the heart of what we do. Our dedicated Research and Development (R&D) team is adept at crafting strategic solutions for even the most complex custom application development projects. Leveraging innovative technologies, we ensure that your products are tailor-made for rapidly evolving markets, giving you a competitive edge. 3. Maximizing Efficiency Automation is the key to releasing resources for delivering superior service. Once we've defined your application development requirements, we take full responsibility for the delivery team and project implementation. This allows you to concentrate on your core business activities while we handle the technical intricacies. 4. Accelerating Delivery Meeting demanding deadlines is crucial. Our nearshore team of software experts is here to assist you in cost-effectively achieving your goals, surpassing what in-house development alone can offer. With decades of experience and a proven delivery framework, we ensure consistency and minimize bottlenecks, enabling faster project delivery. 5. Ensuring Future-Proofing Future-proofing is paramount in the tech world. We establish a continuous integration/delivery process that lets you seamlessly check and deliver code changes across multiple platforms. This approach not only enhances your software ecosystem but also allows you to provide an exceptional service to your customers. 6. Ensuring Operational Resilience and Agility Incorporating Cloud, AI, and RPA technologies, we help you build digitally resilient ecosystems. These ecosystems allow you to adapt swiftly to market changes, fostering business growth. Our rigorous business analysis ensures a tailored, cost-effective technology solution that supports your business needs and continuity plans. Unveiling Our Services: Transforming Concepts into Reality ELEKS offers a range of comprehensive application development services to cater to all your needs: Desktop Software Our full-cycle application development includes seamless desktop app integration for various operating systems, ensuring a smooth experience for users of Windows, macOS, and Linux. Web Applications From technology consulting and UX design to front and back-end development, deployment, and support, our web application development service covers every aspect of creating successful web solutions. Custom Mobile Apps Our mobile application development services provide end-to-end solutions for iOS and Android platforms, delivering flawless performance, robust security, and an enhanced user experience. Data Warehouse and BI Solutions We specialize in delivering advanced Data Warehouse and Business Intelligence solutions across different domains, unlocking actionable insights and driving operational efficiency. Our Workflow: Making Your Vision a Reality Our application development process involves key steps that ensure the success of your project: 1. Idea Validation: We collaborate with you to outline your requirements, identifying ideas that hold the most potential for long-term success. 2. Innovation and Development: Our expert development team designs a custom solution utilizing emerging technologies to address gaps in your current IT ecosystem. 3. Software Testing: We ensure your custom app meets both functional requirements and quality standards, performing user acceptance testing and providing support with technical documentation. 4. Project Governance: Our governance covers product deployment, progress reporting, and issue resolution, keeping you informed and your project on track. When you partner with ELEKS, you're partnering with a Top 100 Global Outsourcing development company that places your project in capable hands. Unlock Your Potential with ELEKS ELEKS' custom application development services are more than just solutions – they are opportunities to innovate, compete, and thrive in the digital age. With a dedicated team of over 2000 software experts and a proven track record of success, we're ready to transform your ideas into reality. Contact us today to embark on a journey of innovation, efficiency, and growth with ELEKS as your trusted partner.

Service

Made to Order

Product & Service

New

ISO


Coiled Tubing Cement Mill

CEM, Cement Mill

Introducing the CEM Cement Mill from Marlin Oil Tools: The Premier Solution for Efficient Wellbore Milling Operations Marlin Oil Tools proudly presents the CEM Cement Mill, a state-of-the-art milling tool designed to optimize cement mill-out operations and tackle various downhole obstacles in oil and gas wells. Engineered for versatility and efficiency, the CEM Cement Mill is capable of grinding and washing out any object within the well that is softer than the mill's cutters, ranging from intentionally placed equipment like bridge plugs to inadvertently lost tools. Key Features of the CEM Cement Mill: Optimized for Cement Removal: Specifically designed to excel in cement mill-out operations, ensuring a clean and clear wellbore for subsequent interventions. Broad Milling Applications: Capable of milling a wide array of downhole obstacles, providing flexibility across well intervention tasks. Effective Debris Management: Equipped with multiple flushing holes, the CEM Cement Mill facilitates the circulation of drilling fluid, which efficiently removes milled particles and cools the cutting edge. Superior Cutting Technology: Features durable carbide inserts welded inside the mill body, offering exceptional grinding performance and longevity. Cooling and Lubrication: The circulation of drilling fluid not only removes debris but also prevents overheating, extending the life of the carbide inserts. Redress Services: Marlin Oil Tools offers comprehensive redress services for worn carbide inserts, ensuring your CEM Cement Mill remains at peak performance. Elevate your well intervention and milling operations with the CEM Cement Mill from Marlin Oil Tools, a leading-edge solution designed for unparalleled efficiency in cement mill-out and obstacle removal in the oil and gas industry. With its advanced design, the CEM Cement Mill tackles downhole challenges with ease, ensuring operational success. Whether you're dealing with cement, bridge plugs, or lost equipment, the CEM Cement Mill's carbide inserts and flushing holes ensure effective milling and debris removal, enhancing wellbore integrity and facilitating subsequent operations. Opt for Marlin Oil Tools' CEM Cement Mill for your milling needs and experience the difference in precision, efficiency, and durability. Why Choose the CEM Cement Mill from Marlin Oil Tools? Versatile Milling Solution: Offers a versatile tool for a wide range of downhole milling challenges. Enhanced Operational Efficiency: Designed to maximize milling efficiency and minimize downtime. Durable and Reliable: Built with high-quality materials and carbide inserts for prolonged service life. Comprehensive Support: Backed by Marlin Oil Tools' expert redress services, ensuring your tool is always in optimal condition. The CEM Cement Mill by Marlin Oil Tools represents the forefront of downhole milling technology, providing oil and gas operators with a reliable, efficient, and versatile tool for enhancing well intervention outcomes. Incorporate the CEM Cement Mill into your operations for smoother, more effective wellbore preparation and obstacle management.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Cranes, hoists, and lifts Leasing

Elevate Your Construction Business with Crane, Hoist, and Lift Leasing from CWB National Leasing Transform Your Operations with Flexible Equipment Leasing In the dynamic world of construction, having access to the right equipment like cranes, hoists, and lifts can be a game-changer for your business. Canadian Western Bank (CWB) National Leasing provides an excellent opportunity to lease this vital equipment with terms that align with your business needs. Here's how CWB National Leasing makes leasing cranes, hoists, and lifts a wise decision for your construction business: 1. Speedy Equipment Access Time is crucial in construction, and CWB National Leasing understands this. They offer a fast and efficient leasing process, often approving applications within 48 hours. This rapid turnaround means you can have your crane, hoist, or lift on-site and operational with minimal delay. 2. Enhanced Purchasing Power With CWB National Leasing, you can maximize your financial resources. Leasing allows for manageable periodic payments instead of a substantial upfront investment, freeing up capital for other business areas. Plus, you can customize your equipment with additional features or accessories for a slight adjustment in payment. 3. Effective Cash Flow Management Manageable lease payments spread over time mean your equipment can start generating revenue for your business while you are paying for it. This helps maintain a healthy balance between your income and expenditures. 4. Flexible Payment Options CWB National Leasing offers adaptable payment plans, including seasonal, semi-annual, or annual options. This flexibility ensures that your payments align with your business's cash flow, especially important in the construction industry where project timelines and revenue can vary. 5. Potential Tax Benefits Leasing can offer tax advantages, such as the ability to expense lease payments, as opposed to depreciating the capital cost of equipment. Always consult with a tax advisor to understand how leasing can benefit your business’s tax situation. 6. Customized Payment Structures CWB National Leasing tailors its leases to fit your unique business needs. Payment plans are designed to match your specific cash flow, ensuring the lease works for your business model. 7. Diverse Buyout Options At the end of your lease, a variety of buyout options are available, from as low as $1 to up to 50% of the total equipment cost. This flexibility allows for eventual ownership of your crane, hoist, or lift. 8. Fair Market Value and Adaptive Payment Options You can opt to defer a portion of the equipment’s cost to the end of the lease, with options to purchase at fair market value or to upgrade to newer models. The step-up or step-down payment options are ideal if you anticipate fluctuations in your cash flow. 9. Seasonal Payment Plans Ideal for businesses with seasonal cash flows, CWB National Leasing can design payment schedules that suit your specific revenue patterns, such as a six-month-on, six-month-off plan. Conclusion Leasing cranes, hoists, and lifts through CWB National Leasing is a strategic decision that can significantly enhance your construction operations. It offers a way to access essential, high-value equipment while maintaining financial flexibility and stability, enabling your business to take on more projects and grow in a competitive market.

Service

In Stock

Service

New

ISO


Replaceable Blade Stabilizer for Coiled Tubing Applications

RBS, Replaceable Blades Stabilizer

Introducing the RBS (Replaceable Blades Stabilizer) from Marlin Oil Tools: The Ultimate Solution for Precise Well Intervention Marlin Oil Tools is proud to unveil the RBS (Replaceable Blades Stabilizer), a cutting-edge downhole tool engineered to enhance the precision and efficiency of well interventions. Designed for seamless integration into the Bottom Hole Assembly (BHA), the RBS is essential for operations requiring the stabilization and centralization of the BHA within wells of varying inclinations and geometries. Key Features of the RBS (Replaceable Blades Stabilizer): Optimal BHA Centering: The RBS ensures that the BHA remains centered relative to the well's axis, vital for maintaining operational integrity in inclined wells up to 90 degrees. Versatile Blade Replacement: Equipped with replaceable blades, the RBS offers unparalleled adaptability, allowing for customization based on wellbore size and operational requirements. Enhanced Milling and Perforation: By centralizing the tool within the well, the RBS significantly improves the effectiveness and accuracy of milling and perforation tasks. Correction of Eccentric Placement: The stabilizer addresses issues related to the residual bending of coiled tubing, ensuring the CT BHA is correctly positioned within the well. Wide Range of Operations: With a set of different size blades, one tool can accommodate various operational needs, making it a versatile addition to any well intervention toolkit. Elevate your well intervention strategies with the RBS (Replaceable Blades Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum operational precision in the oil and gas industry. Featuring innovative replaceable blades for adaptability and enhanced centralization capabilities, the RBS stabilizer ensures accurate positioning for critical tasks such as milling and perforation. Suitable for wells with significant inclinations and equipped to correct coiled tubing bending issues, the RBS is your go-to tool for ensuring BHA stability and efficiency. Choose the RBS for a reliable, versatile solution to meet the demands of complex well interventions. Why Choose the RBS from Marlin Oil Tools? Precision in Well Intervention: Guarantees accurate BHA positioning for improved operational outcomes. Customizable for Specific Needs: Interchangeable blades provide flexibility for a wide array of well conditions and tasks. Ideal for Challenging Wells: Effectively stabilizes the BHA in wells with up to 90 degrees of inclination. Operational Versatility: One tool can adapt to multiple operational scenarios, reducing the need for multiple specialized tools. The RBS (Replaceable Blades Stabilizer) by Marlin Oil Tools represents the pinnacle of downhole stabilization technology, providing operators with a powerful tool for enhancing well intervention accuracy and efficiency. Incorporate the RBS into your operations to achieve superior performance and operational success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Plug with Equalizing Prong and Valve Sub-Assembly

Downhole Tools

HOCA Oil Tools: Revolutionizing Downhole Operations with Plug with Equalizing Prong and Valve Sub-Assembly In the dynamic and demanding world of downhole operations within the oil and gas industry, the quest for innovation, efficiency, and safety is relentless. HOCA Oil Tools, a leading provider of specialized downhole slick line tools, meets this challenge head-on with our advanced Plug with Equalizing Prong and Valve Sub-Assembly. This tool is meticulously designed to enhance the functionality and safety of downhole operations, providing a solution that is both versatile and reliable. HOCA’s Plug with Equalizing Prong and Valve Sub-Assembly: Tailored for Optimal Performance Our Plug with Equalizing Prong and Valve Sub-Assembly is engineered for precision and durability, designed to address the complex needs of modern downhole activities. This innovative tool combines the functionality of a plug for secure sealing and isolation with the added advantage of an equalizing prong and valve mechanism. This integration allows for controlled pressure equalization, crucial in preventing potential downhole complications and ensuring the safety of the well and personnel. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Plug with Equalizing Prong and Valve Sub-Assembly means opting for a product that stands at the confluence of innovation, quality, and safety. We are committed to providing solutions that not only meet the current demands of the oil and gas industry but also anticipate future challenges, ensuring our clients are equipped for success. Integrating our advanced plug assembly into your downhole operations signifies a move towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your operational goals with cutting-edge solutions and comprehensive service. Select HOCA Oil Tools for your downhole needs and leverage the advantages of our Plug with Equalizing Prong and Valve Sub-Assembly to optimize your operational outcomes. Partner with us and step into a new era of downhole operations, where efficiency, safety, and performance are paramount. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards and drive your success in the competitive oil and gas landscape.

Buy

In Stock

Product & Service

New

API

Air Freight


Capillary Deliquification Safety System

Cap String

In mature fields, liquid loading of gas wells is a common problem. In the short term, this can lead to decreased production, and if not managed correctly, can ultimately reduce overall reservoir recovery. One option for managing the problem is the use of surfactants as foaming agents to artificially unload the well. The preferred method would allow automatic and continuous delivery of these surfactants. The capillary deliquification safety system facilitates delivery of surfactants or other chemicals and liquids to a specified point within the completion, while maintaining the purpose and functionality of a downhole safety device. The deliquification safety system can be installed in an existing completion with the appropriate safety valve landing nipple (SVLN) profile — either a dedicated SVLN or within a tubing-retrievable safety valve (TRSV) in which the control system communication is activated to operate an installed wireline-retrievable safety valve (WLRSV). The system’s injection feature operates via the WLRSV control system. When control-line pressure reaches a predetermined pressure, a regulator installed below the WLRSV opens, allowing chemical injection to occur. Use of the existing control line provides a cost-effective method of installing a semi-permanent injection system without the need to modify the wellhead. The WLRSV is designed to shut in the well at a point below the surface and is opened with hydraulic control pressure. In this application, the applied chemical injection pressure maintains the safety valve in the open position during injection, and the valve closes when injection is stopped. Applications » Chemical injection for gas well deliquification or scale treatment purposes » Available for landing nipples/TRSVs with 2.75-in. and larger sealbores Features » Field-proven WLRSV » Equalizing or non-equalizing-type flapper closure *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Ultra-Sonic Inspection Tool (USIT) runs

Advancing Well Integrity with InWaTec Combined’s Ultra-Sonic Inspection Tool Services In the pursuit of operational excellence within the oil and gas industry, maintaining the integrity of well infrastructure is paramount. InWaTec Combined is proud to present our Ultra-Sonic Inspection Tool (USIT) Services, a cutting-edge solution for comprehensive cement evaluation, casing inspection, and integrity assessment. The USIT is a marvel of diagnostic precision, utilizing a single transducer mounted on an Ultrasonic Rotating Sub (USRS) at the tool's base. This sophisticated apparatus emits ultrasonic pulses ranging from 200 to 700 kHz, meticulously recording the waveforms reflected from both internal and external casing interfaces. The decay rate of these waveforms is a direct indicator of the cement bond's quality, while the resonant frequency readings of the casing yield accurate wall thickness measurements—critical data for assessing pipe integrity. Thanks to the transducer's placement on the rotating sub, our USIT Services ensure a full 360° scan of the casing circumference, leaving no aspect of the wellbore unexamined. This comprehensive coverage is pivotal for evaluating cement bond quality and determining the condition of the casing with unmatched precision. Our tool’s high angular and vertical resolutions can detect even the narrowest channels, down to 1.2 inches in width, providing a detailed assessment of well integrity. Our real-time data acquisition and analysis at the wellsite generate self-explanatory maps and valuable metrics, including cement bond logs, casing thickness, internal and external radii. These insights are indispensable for: Cement evaluation to ensure zonal isolation and well integrity. Casing inspection to ascertain ongoing wellbore stability. Corrosion detection and monitoring to prevent potential well failures. Identification of internal and external damage or deformation, safeguarding against unexpected operational hazards. Casing thickness analysis, crucial for calculating collapse and burst pressure parameters and prolonging the life of the well. InWaTec Combined's USIT Services are not just diagnostic tools—they are a testament to our commitment to safeguarding our clients' assets and optimizing well performance. By embracing our Ultra-Sonic Inspection Tool Services, operators gain the assurance that their wells remain robust, compliant, and productive throughout their lifecycle. In an industry where well integrity is synonymous with operational success, InWaTec Combined stands as your sentinel of safety and efficiency. Deploy our USIT Services, and harness the power of precision ultrasonic technology to illuminate the unseen, ensuring your operations are secure from the inside out.

Service

In Stock

Service

New

API

Land Freight


Lathes Leasing

Enhance Your Manufacturing Precision with Lathe Leasing from CWB National Leasing Transforming Your Production with Flexible and Advanced Equipment Solutions In the manufacturing and metalworking industries, lathes are essential for precision shaping and machining of various materials. Leasing lathes through Canadian Western Bank (CWB) National Leasing provides a strategic and financially sensible solution for businesses looking to upgrade or expand their production capabilities. Here’s how leasing lathes can benefit your manufacturing operations: 1. Rapid Equipment Procurement CWB National Leasing understands the need for timely equipment acquisition in fast-paced manufacturing environments. They offer a swift leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround means your lathes can be delivered and operational promptly, minimizing disruption and enhancing your production line efficiency. 2. Increased Financial Leverage Leasing lathes with CWB National Leasing empowers your business with enhanced buying power. Opting for periodic payments over a hefty initial purchase frees up capital for other vital business needs. Additionally, the flexibility to add extra features or accessories to your lathes for a small payment increase allows for customization to meet your specific production requirements. 3. Effective Cash Flow Management Smaller lease payments over the term mean your lathes start contributing to your business’s revenue while they're still being paid off. This approach is essential in maintaining a balanced expense-to-revenue ratio, crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with fluctuating or seasonal income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing lathes can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease lathes through CWB National Leasing is a strategic decision that equips your manufacturing business with essential machinery while maintaining financial agility. It ensures access to advanced lathes, vital for precise and efficient production, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased production capacity, and greater profitability, helping your business to thrive in the competitive manufacturing sector.

Service

In Stock

Service

New

ISO


PMIT

Unveiling Subsurface Precision: InWaTec Combined's PMIT Services for Optimal Wellbore Assessment In the ever-evolving landscape of the oil and gas industry, the quest for precision in subsurface analysis is relentless. InWaTec Combined's Platform Multifinger Imaging Tool (PMIT) Services stand at the forefront of this quest, offering unparalleled accuracy in the radial measurement of tubing and casing strings' internal diameters. The PMIT is an innovation par excellence, a multifinger caliper tool that delves into the heart of the wellbore to capture highly precise data. This tool is not just a measuring device; it is the embodiment of accuracy and technological sophistication. With its multiple sensor fingers, the PMIT glides along the tubing or casing surface, meticulously logging variations in the internal diameter that could indicate potential issues such as corrosion, wear, or deformation. Our PMIT services are crucial for ensuring the integrity and performance of downhole tubulars. With its ability to provide a 360-degree internal view, the PMIT helps operators make informed decisions about maintenance, workover needs, and overall well management. The accuracy of the PMIT’s measurements allows for the early detection of anomalies that, if left unchecked, could lead to operational failures or safety hazards. At InWaTec Combined, we believe that a thorough understanding of the wellbore condition is essential for the longevity and productivity of wells. Our PMIT Services deliver this understanding through detailed assessments that support proactive intervention strategies. The data gathered by the PMIT facilitates accurate planning for remedial operations, ensuring that any service performed is targeted and effective. In an industry where the margin for error is increasingly narrow, the PMIT offers a significant advantage. Operators can trust the data from our PMIT Services to reflect the true conditions within their wells, providing a solid foundation for all subsequent operational decisions. Choose InWaTec Combined's PMIT Services for your wellbore assessment needs, and experience the confidence that comes from precision technology and detailed, actionable data. Our commitment is to provide you with the insights necessary to maintain the highest standards of well integrity and performance. With InWaTec Combined, you are not just measuring the depths—you are mastering them.

Service

In Stock

Service

New

API

Land Freight


Wisdom Cap Lamp KL12MS

Corded Miner's Cap Lamp

Provix in New Lowell

Meer informatie

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Well Flow Control Valve Direct Response 4.36 inch

Injection Valve WI 4.36

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Tubing Swage

Downhole Tools

Unlock Efficiency in Oilfield Operations with HOCA Oil Tools’ Tubing Swages In the dynamic world of oilfield services, precision and reliability are non-negotiable. At HOCA Oil Tools, we understand the critical nature of downhole operations. That’s why we're proud to present our premium Tubing Swages – Type A and Type C – designed to meet and exceed the challenging demands of downhole slick line tools applications. Revolutionize Downhole Challenges with Tubing Swages Our Tubing Swages are engineered for excellence, ensuring your downhole operations are seamless and efficient. The Type A and Type C Tubing Swages are crafted with the highest quality materials, ensuring durability and long-lasting performance in the harshest environments. Type A Tubing Swage: This variant is meticulously designed to re-expand constricted tubing, ensuring a free passage for wireline tools and sub-surface controls. Its tapered ends facilitate easy navigation through tubing, while the central hole and lateral ports allow fluid bypass, optimizing performance. Type C Tubing Swage: Building on the features of Type A, the Type C Tubing Swage includes an additional box connection at the bottom, enhancing its functionality and application range. This feature ensures greater versatility, meeting diverse operational needs with ease. Six Benefits of Using HOCA’s Tubing Swages: Enhanced Productivity: By rectifying constrictions in the tubing, our swages ensure smooth operations, significantly reducing downtime and boosting productivity. Versatility: Available in various sizes, the Tubing Swages cater to a wide range of tubing diameters, ensuring the right fit for your specific operational needs. Durability: Crafted with high-quality materials, our swages withstand the challenging downhole environment, offering long-term reliability and reducing the need for frequent replacements. Efficient Design: The tapered design and fluid bypass capability ensure minimal resistance during operations, enhancing efficiency and effectiveness. Cost-Effective: By maintaining the integrity of your downhole tools and minimizing operational delays, our Tubing Swages prove to be a cost-effective solution in the long run. Safety: Designed with safety in mind, our swages help prevent accidents and equipment damage, ensuring a safer working environment. Transform Your Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to providing solutions that drive success. Our Tubing Swages are a testament to our commitment to quality, efficiency, and safety. Embrace the change with HOCA’s Tubing Swages and experience unparalleled downhole operational excellence.

Buy

In Stock

Product & Service

New

API

Air Freight


HDI 2021 Pressure Transmitter System

Pressure Transmitter

When it comes to precise and reliable pressure measurement, the HDI 2021 Pressure Transmitter System sets the standard for excellence. Built with the high-quality components that HDI is renowned for, this intrinsically safe, certified, solid-state 4-20mA transmitter ensures exceptional performance in even the most demanding applications. Tailored to Your Needs: The HDI 2021 is available in a variety of configurations, allowing customers to specify the housing that best suits their unique application requirements. With customisation options at your disposal, you can trust that the transmitter will seamlessly integrate into your operational setup. Complete Assembly for Easy Installation: Delivered as a complete assembly, the HDI 2021 Pressure Transmitter System is ready for quick and hassle-free installation. We understand the value of your time, which is why we provide a comprehensive solution that saves you effort and resources. Unparalleled Safety and Reliability: All HDI Transmitters are designed to provide unmatched safety, accuracy, reliability, and low maintenance for our users. With the 2021 Pressure Transmitter System, you can have peace of mind knowing that it meets the highest industry standards and is built to last. Versatility for Various Applications: The HDI 2021 can be customized not only for pressure measurement but also for load, force, and torque applications across different industries. Whether you are in oil and gas, manufacturing, or any other field, our team can work with you to tailor the system to your specific needs. Certifications You Can Trust: The HDI 2021 Pressure Transmitter System boasts certifications that ensure compliance and performance. It is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Key Features: • Field repairable system, minimizing downtime and reducing maintenance costs • Wide pressure range options, including 5,000 psi, 6,000 psi, 10,000 psi, 16,000 psi, and 20,000 psi • Multiple connection types, such as 2" 1502, 2" 2002, 2" 2202, or flanged connections, providing flexibility for installation • 4-20mA output available, ensuring compatibility with your existing systems • Solid-state platform with no fluids or moving parts, guaranteeing long-term reliability and accuracy Trust HDI for Unmatched Performance: When it comes to pressure measurement, the HDI 2021 Pressure Transmitter System stands out as the pinnacle of quality and precision. Contact our experienced team today to discuss your specific application requirements and experience the HDI advantage. With our unwavering commitment to excellence, we deliver solutions that meet your needs and exceed your expectations. Houston Digital Instruments - Your Partner in Precision Measurement.

Buy

In Stock

Manufacturer

New

API

Air Freight


Circulating Type Chokes for Nipples

Downhole Tools

HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Boot Basket for Coiled Tubing

BBT Coiled Tubing Tool

Introducing the BBT Boot Basket from Marlin Oil Tools: The Ultimate Solution for Efficient Debris Management in Oil and Gas Operations Marlin Oil Tools is proud to present the BBT Boot Basket, a cutting-edge tool designed for optimal debris management during oil and gas drilling, milling, or garbage collection operations. Engineered to trap large pieces of sludge that cannot be circulated out of the well to the surface, the BBT Boot Basket is an essential component for maintaining clean and efficient wellbore conditions. Here’s why the BBT Boot Basket is a must-have for your operations. Key Features of the BBT Boot Basket: Efficient Debris Capture: Utilizing a unique design, the BBT Boot Basket efficiently captures large particles. The high-speed upstream flow created by the annular space's small restriction in the lower part of the tool allows for effective trapping as the flow slows down when it passes the upper part, where the gap increases sharply. Optimal Positioning: Designed to be positioned as close to the mill or bit as possible, the BBT Boot Basket ensures that milling procedures can be carried out in normal mode with standard circulation, maximizing debris capture efficiency. Enhanced Capacity Options: To accommodate varying operational needs, several BBT Boot Baskets can be used within the same Bottom Hole Assembly (BHA) to increase overall debris trapping capacity. Customizable Length: Recognizing the diverse requirements of our clients, Marlin Oil Tools offers the option to produce the BBT Boot Basket in different lengths, ensuring a perfect fit for every operation. Durability and Ease of Maintenance: The simple yet robust design of the BBT Boot Basket not only ensures excellent strength characteristics for withstanding torsion and tension but also allows for quick and easy redress, minimizing downtime and extending tool life. Elevate your wellbore cleaning operations with the BBT Boot Basket from Marlin Oil Tools, a premier solution for trapping large sludge particles during drilling, milling, or garbage collection in the oil and gas industry. Featuring an efficient design for optimal debris capture and customizable length options, the BBT Boot Basket enhances operational cleanliness and efficiency. With the capability to position the tool close to the mill or bit and the option to use multiple units for increased capacity, the BBT Boot Basket is adaptable to various operational needs. Its durable construction and easy maintenance ensure long-term reliability and performance. Choose the BBT Boot Basket for a cleaner, more efficient wellbore. Why Choose the BBT Boot Basket from Marlin Oil Tools? Superior Debris Management: Effectively traps large particles, ensuring cleaner wellbore conditions. Customizable and Versatile: Offers options for different lengths and the use of multiple baskets for increased capacity. Durable and Easy to Maintain: Designed for durability and easy redress, reducing operational downtime and costs. Optimized for Efficiency: Enhances milling procedures and maintains normal circulation, optimizing well intervention operations. For operators looking to improve their debris management strategy and maintain efficient well operations, the BBT Boot Basket by Marlin Oil Tools is the ideal solution. Contact us today to learn more about how our innovative oil and gas coiled tubing tools can benefit your operations.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Coffee machines Leasing

Elevate Your Business Ambiance with Coffee Machine Leasing from CWB National Leasing Brewing Success with Advanced and Cost-Effective Beverage Solutions For businesses in the hospitality sector, offices, or any setting where offering a quality coffee experience is essential, having a top-notch coffee machine can significantly enhance customer satisfaction and employee morale. Leasing coffee machines through Canadian Western Bank (CWB) National Leasing presents a flexible, economical, and practical solution for businesses looking to upgrade their beverage services. Here’s how leasing coffee machines can benefit your business: 1. Swift Access to High-Quality Coffee Machines CWB National Leasing values the importance of enhancing your business ambiance and offers a rapid leasing process. With decisions typically made within 48 hours of application submission, your coffee machines can be delivered and operational quickly. This efficiency means you can start offering premium coffee experiences without significant delay, enhancing your customer service and workplace environment. 2. Enhanced Financial Power Leasing coffee machines with CWB National Leasing boosts your financial flexibility. It allows you to spread costs over manageable periodic payments rather than making a large upfront investment, freeing up capital for other key business needs. The option to add extra features or accessories to your coffee machines for a small payment increase allows for customization to meet your specific service requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your coffee machines start contributing to your business’s ambiance and productivity while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing coffee machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease coffee machines through CWB National Leasing is a strategic decision that equips your business with essential beverage equipment while maintaining financial agility. It ensures access to state-of-the-art coffee machines, vital for delivering high-quality coffee experiences, without the financial burden of a large upfront investment. This leasing approach enables enhanced customer satisfaction, improved employee well-being, and increased overall appeal of your business setting.

Service

In Stock

Service

New

ISO


Wisdom EX Cap Lamp

Wisdom EX Cap Lamp, 7.0Ah, Class I, II, III, Division I, CSA C22.2, UL 913, -20C-40C

Provix in New Lowell

Meer informatie

Illuminate Your Work with the Wisdom EX Cap Lamp – A Robust Solution from Provix Provix is excited to introduce the Wisdom EX Cap Lamp (model NWI-WLAMP3-EX), a high-performance lighting solution designed to meet the needs of professionals in various industries. This cap lamp combines superior illumination with the highest safety standards. Advanced Lighting for Challenging Environments The Wisdom EX Cap Lamp is equipped with a powerful 7.0Ah battery, providing long-lasting and reliable illumination for extensive work periods. Designed to operate efficiently in extreme conditions, it functions perfectly in temperatures ranging from -20°C to 40°C, making it ideal for a wide range of working environments. Compliance with Safety Standards Safety is paramount in professional settings, and the Wisdom EX Cap Lamp meets stringent safety standards. It is certified for Class I, II, and III, Division I, and complies with CSA C22.2 and UL 913 standards. This compliance ensures that the lamp is safe for use in hazardous locations where explosive gases or dust may be present. Durable and Reliable Built to withstand the rigors of industrial use, the Wisdom EX Cap Lamp is a durable and reliable choice for professionals. Its robust construction ensures it can endure the tough conditions often found in mining, construction, and other industrial settings. Ergonomic and User-Friendly Design Weighing in at a comfortable level, the Wisdom EX Cap Lamp is designed for ease of use and comfort, ensuring that it can be worn for extended periods without causing fatigue. Its ergonomic design makes it a practical choice for daily use in demanding work conditions. Versatile for Various Industrial Applications The Wisdom EX Cap Lamp is not only suitable for mining but also for other applications such as construction, oil and gas, and industrial maintenance. Its versatility and dependability make it an essential tool for a wide range of professionals. Get Your Wisdom EX Cap Lamp Today Upgrade your lighting equipment with the Wisdom EX Cap Lamp from Provix. Available now, this cap lamp is your solution for safe, efficient, and reliable lighting in any work environment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Voice, data, and video Services

Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence.

Service

In Stock

Service

New

ISO


HDI 3300 Temperature Gauge System

Temperature Monitoring

Houston Digital Instruments (HDI) is proud to present the HDI 3300 Temperature Gauge System, a state-of-the-art intrinsically safe, certified, solid-state electronic temperature gauge. Designed to meet the demanding requirements of industries such as high-pressure nitrogen pumping, geothermal drilling, mud-based drilling, bulk liquid storage, well control manifolds, and flare stacks, this gauge system delivers accurate and reliable temperature monitoring in even the harshest conditions. Unmatched Accuracy and Reliability: When it comes to temperature monitoring, precision is paramount. With the HDI 3300 Temperature Gauge System, you can trust in its exceptional accuracy and reliability. Built on our legacy of excellence, each gauge system offers an impressive 0.5% accuracy of full scale, ensuring that you receive precise and trustworthy temperature readings for your critical operations. Flexible Temperature Ranges and Resolutions: The HDI 3300 accommodates a wide range of temperature requirements, offering temperature ranges up to 150 degrees Celsius or 300 degrees Fahrenheit. Whether you're working in extreme heat or sub-zero environments, our gauge system provides accurate measurements tailored to your specific needs. With a resolution of 0.1 degrees, you can closely monitor temperature changes and respond promptly to any variations, maintaining control and efficiency in your operations. Versatile and Easy to Use: We understand that every application is unique, which is why the HDI 3300 Temperature Gauge System offers a range of configuration options to suit your requirements. Choose from 4-20mA or 0-1 volt output, allowing seamless integration with your existing monitoring systems. The solid-state platform eliminates the need for fluids or moving parts, reducing maintenance requirements and ensuring long-lasting performance. With a simple interface for calibration, you can easily verify and fine-tune temperature measurements to maintain the highest level of accuracy. Designed for Safety and Convenience: Safety is our utmost priority at HDI. The HDI 3300 Temperature Gauge System is intrinsically safe, certified to meet Class 1, Division 1, Groups A, B, C, and D standards by CSA. Additionally, an optional ATEX certification, II 1 G, Ex ia IIC T4, is available to meet the specific requirements of your industry. The battery-powered system provides flexibility and portability, allowing you to monitor temperatures even in remote locations. A low battery indicator ensures you are always aware of the battery status, preventing any interruptions in monitoring. Customize Your Monitoring Experience: At HDI, we understand that every customer has unique needs. The HDI 3300 Temperature Gauge System offers configuration options to tailor the system to your specific preferences. Choose from 4-20mA output, externally powered options, and backlight capabilities to optimize your monitoring experience. Secondary displays are also available, allowing you to extend visibility and control across multiple locations. Trust Houston Digital Instruments: For over 30 years, Houston Digital Instruments has been a leader in providing cutting-edge measurement and monitoring solutions to industries worldwide. Our commitment to safety, accuracy, reliability, and low maintenance shines through in every product we offer. The HDI 3300 Temperature Gauge System is a testament to our dedication to delivering the highest quality solutions that meet the evolving demands of our customers. Experience precise temperature monitoring with the HDI 3300 Temperature Gauge System. Contact our expert team today to discuss your specific requirements and discover how HDI can elevate your operations to new heights. Trust HDI for safety, accuracy, and reliability. Where Precision Meets Performance - HDI, your partner in temperature monitoring excellence.

Buy

In Stock

Manufacturer

New

API

Air Freight


Protector's Dismantle Bench

Cross Coupling Protector Workbench

Attention all oil industry businesses in need of high-quality workbenches for disassembling cross-coupling protectors – Sivam has got you covered! Our workbenches are specifically designed for the task of disassembling cross-coupling protectors, ensuring that your team can work safely and efficiently. At Sivam, we pride ourselves on our commitment to using only the highest quality materials in our products. Our workbenches are built to last, with exceptional durability and reliability that ensures your team can work with confidence. We understand that precision and accuracy are crucial when it comes to disassembling cross-coupling protectors. That's why our workbenches are designed to provide a stable and secure platform for the task. Our workbenches are also equipped with a range of additional features to help your team work more efficiently and effectively. Our team at Sivam understands the importance of meeting our clients' needs. That's why we work closely with our customers to design workbenches that meet their exact specifications. We take pride in providing exceptional customer service, and our commitment to quality is second to none. When it comes to disassembling cross-coupling protectors, Sivam is the name you can trust. Choose us for all your workbench needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right!

Buy

In Stock

Manufacturer

New

ISO

Land Freight


HDI 1000B Pressure Gauge System

Electronic Pressure Gauge

Houston Digital Instruments (HDI) is excited to present the 1000B Pressure Gauge System, a high-performance solution designed to meet your pressure measurement needs. With its intrinsically safe, solid-state electronic design, this gauge system provides accurate and easily readable pressure readings in any lighting conditions. Unparalleled Readability and Accuracy: The 1000B Pressure Gauge System is engineered to deliver exceptional readability, ensuring that you can access crucial pressure information with ease. Regardless of the lighting conditions in your environment, the gauge's display remains clear and easily visible. With a measurement range of up to 20,000 psi and an accuracy of 0.50% of full scale, you can trust that your pressure readings are precise and reliable. Versatile Application: The 1000B is designed to serve as either a primary or secondary display, offering flexibility for your specific requirements. With slave/secondary display options available, you can easily integrate the gauge system into your existing setup. Each 1000B consists of a Gauge Display, Inline Cable, and Sensor Assembly, allowing for convenient placement of the display relative to the connection point. Benefit from the versatility and adaptability of our field-proven platform, which has been refined over 30 years of industry experience. Durability and Low Maintenance: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. The 1000B Pressure Gauge System is battery-powered, eliminating the need for external power sources and providing hassle-free operation. With a field repairable system, you can minimize downtime and reduce maintenance costs, ensuring continuous and efficient pressure monitoring. The low battery indicator keeps you informed of the system's power status, enabling you to stay prepared and maintain uninterrupted performance. Tailored to Your Application: The 1000B can be combined with various sensor types for pressure, load, force, and torque applications in a wide range of industries. Our team of experts is ready to assist you in selecting the optimal configuration for your specific needs. Whether you require 2" Male NPT, 2" 1502, 2" 2002/2202, or flanged connections, we offer customization options to seamlessly integrate the gauge system into your setup. Achieve accurate and reliable pressure measurements that meet your unique application requirements. Exceptional Performance in Demanding Environments: We understand that certain industries present challenging conditions, including high vibration environments. The 1000B Pressure Gauge System is engineered to deliver consistent performance, even in such demanding settings. With its solid-state platform, free from fluids or moving parts, the gauge system ensures durability and reliable operation in the face of vibrations and harsh environmental conditions. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000B Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. With configuration options such as 4-20mA output, 4-20mA input, backlighting, externally powered options, 0-1 volt output, and secondary display compatibility, you can tailor the system to your specific requirements. Contact Houston Digital Instruments today to discuss your specific application needs. Our team of experts is dedicated to helping you select the ideal solution for your pressure measurement requirements. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Buy

In Stock

Manufacturer

New

API

Air Freight


320 GC Hydraulic Excavator

320 GC Hydraulic Excavator

BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight

Buy

Currently in Use

Distributor

New

ISO

Sea Freight


Coiled Tubing Crossover Tool

XOV Crossover Tool

Introducing the XOV Crossover Tool from Marlin Oil Tools: Your Solution for Seamless Downhole Connections Marlin Oil Tools is proud to offer the XOV Crossover Tool, a versatile downhole tool designed to facilitate the connection of two tools or pipes with differing threads, ensuring seamless integration within your Bottom Hole Assembly (BHA) during oil and gas operations. Engineered for adaptability, the XOV Crossover Tool is available in a wide range of designs, types, and sizes of threads to meet the diverse needs of the industry. Key Features of the XOV Crossover Tool: Versatile Thread Compatibility: Designed to connect components with different thread patterns, enhancing operational flexibility and efficiency. Customizable Design Options: Available in various designs and specifications, including multiple outer diameters and inner bore sizes, to perfectly match your operational requirements. Precision Engineering: Features precise thread codes for both internal (Box) and external (Pin) threads, ensuring reliable and secure connections. Rapid Customization Capability: Offers quick turnaround on customized tool designs upon client request, minimizing downtime and accelerating project timelines. Durable Construction: Built to withstand the harsh conditions of downhole environments, ensuring reliability and longevity of your tool assembly. Easy Integration: Seamlessly integrates into existing BHA configurations, providing a straightforward solution to connectivity challenges in the field. Maximize your downhole operational efficiency with the XOV Crossover Tool from Marlin Oil Tools, a leading solution for connecting downhole tools and pipes with varying thread types in the oil and gas industry. This highly adaptable crossover tool is engineered to offer precision, durability, and versatility, featuring customizable options for thread sizes, diameters, and designs to meet the specific needs of your operations. With its capability for rapid customization and reliable performance, the XOV Crossover Tool is the ideal choice for ensuring seamless connections and enhancing the integrity of your downhole tool assemblies. Choose Marlin Oil Tools for your crossover needs and experience the difference in quality and service. Why Choose the XOV Crossover Tool from Marlin Oil Tools? Operational Versatility: Ensures compatibility across a broad spectrum of downhole tools and pipe threads. Customization to Fit: Tailors to your specific operational needs with customizable designs and precise threading. Quick Response Time: Provides fast turnaround on custom requests, keeping your projects on schedule. Enhanced Connectivity: Guarantees secure and reliable connections, reducing the risk of operational issues. The XOV Crossover Tool by Marlin Oil Tools represents the cutting edge in downhole connectivity solutions, offering unparalleled adaptability, precision, and reliability for your oil and gas operations. Incorporate the XOV Crossover Tool into your tool assembly to achieve optimal performance and operational success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


X-over Protector

Single completion crossover type

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Buy

In Stock

New

New

API

Air Freight


Stranded Gas Virtual Pipeline

Gas Processing and Transport

Maximize the Value of Your Stranded Gas with Lovat Gas Solutions Stranded gas, trapped in wells that are isolated from pipeline infrastructure, represents an untapped opportunity for producers. At Lovat Gas Solutions, we specialize in helping companies unlock the value of their stranded gas assets. If you have idle gas wells and are seeking to realize the potential value of this resource, we are here to assist you in developing a production and revenue plan. Stranded gas wells can present unique challenges, but they also hold significant potential. To extract value from these assets, a well-designed plan is essential. Our team of experts at Lovat Gas Solutions has the knowledge and experience to help you navigate this process and develop a comprehensive production and revenue plan for your stranded gas. Why choose Lovat Gas Solutions for your stranded gas needs? 1. Specialized Expertise: We understand the complexities and nuances of stranded gas projects. With our specialized expertise, we can assess the unique characteristics of your stranded wells and design a customized plan to extract and monetize the gas effectively. 2. Value Optimization: Our goal is to help you maximize the value of your stranded gas assets. By developing a production and revenue plan tailored to your specific situation, we aim to unlock the full potential of your resources and generate a significant return on investment. 3. Comprehensive Support: From the initial evaluation to the execution of the plan, Lovat Gas Solutions provides end-to-end support. Our team will collaborate closely with you, offering guidance and assistance at every stage of the process to ensure a seamless and successful outcome. 4. Sustainable Approach: We prioritize environmental sustainability in all our operations. Our plans for stranded gas production are designed to comply with regulatory standards and minimize any potential impact on the environment. We are committed to helping you extract value from your stranded gas assets while maintaining responsible and sustainable practices. Take the first step towards unlocking the value of your stranded gas assets. Contact Lovat Gas Solutions today, and let our team of experts develop a production and revenue plan that suits your specific needs. With our specialized expertise, comprehensive support, and commitment to sustainability, we are the partner you can rely on to maximize the potential of your stranded gas resources. Trust Lovat Gas Solutions to transform your idle gas assets into valuable sources of revenue.

Service

Made to Order

Product & Service

New

ANSI

Land Freight


Depthstar SCSSSV 4.5 inch

SCSSSV

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


StimStixx Thru-Tubing 3 1/2

MatrixStixx 3.5

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights.

Buy

In Stock

Product & Service

New

API

Air Freight


HDI 2100 Pump Stroke Counter System

Pump Stroke Counter

When it comes to accurate and reliable monitoring of mud pumps, the HDI 2100 Pump Stroke Counter stands as the industry's leading solution. Designed as an intrinsically safe, certified, solid-state electronic stroke counter, the HDI 2100 ensures precise tracking and display of total accumulated mud pump strokes and stroke rates. Seamless Integration with the HDI 9000 Choke Console System: The HDI 2100 is most commonly found within the HDI 9000 Choke Console System, where it plays a vital role in monitoring and displaying the stroke data of up to four individual mud pumps simultaneously. With its advanced capabilities, this stroke counter provides real-time insights into pump performance, enabling operators to make informed decisions for efficient drilling operations. Uncompromising Precision and Reliability: Equipped with a quartz crystal oscillator, the HDI 2100 delivers high-precision stroke counts with zero drift. This ensures accurate and reliable measurement, even in harsh environments and high vibration conditions encountered in land and offshore drilling. Constructed with a stainless steel case and stainless steel piezo switches, the HDI 2100 is built to withstand the toughest conditions for long-lasting performance. User-Friendly and Low Maintenance: Once installed, the HDI 2100 requires virtually no maintenance or calibration, allowing you to focus on your operations with confidence. The solid-state display provides clear and reliable information, while the simple interface allows for easy calibration when needed. Battery-powered operation ensures portability and convenience, while a low battery indicator keeps you informed about power levels. Versatile Configuration Options: The HDI 2100 offers various configuration options to suit your specific needs. You can choose between micro-switch or proximity sensor inputs, depending on your preference and operational requirements. Dual sensors are also available for seamless integration with HMI/PLC systems, enhancing the automation capabilities of your drilling processes. Certifications You Can Trust: The HDI 2100 Pump Stroke Counter is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Experience the HDI Advantage: With the HDI 2100 Pump Stroke Counter, you gain access to unrivaled accuracy, reliability, and ease of use. Our commitment to excellence ensures that all HDI Gauges provide safety, accuracy, reliability, and low maintenance for our valued customers. Contact our experienced team today to discuss your specific monitoring requirements and discover how the HDI 2100 can revolutionize your mud pump operations. Trust Houston Digital Instruments for the ultimate monitoring solution. Where Safety Meets Performance - HDI, your partner in precision measurement.

Buy

In Stock

Manufacturer

New

API

Air Freight


Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well.

Service

In Stock

Service

New

API

Land Freight


MS-251EC Extraction Condensing Steam Turbine

Multistage Turbine

Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Public Sector Verticals

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.

Service

Made to Order

Service

New

ISO

Digital


Broaching Tool Runs

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity.

Service

In Stock

Service

New

API

Land Freight


Provix Lanyard

Lanyard

Provix in New Lowell

Meer informatie

Elevate Your Gear with the Provix Lanyard – A Versatile Accessory from Wisdom Mining Equipment Provix is proud to introduce the Provix Lanyard (model NWI-PRX-LANYARD), a simple yet essential accessory for miners and professionals in various industries. Designed to fit Cap Light models 2, 3, and 4, this lanyard is a versatile tool to enhance the functionality and safety of your essential equipment. Enhanced Security and Accessibility The Provix Lanyard is expertly crafted to provide a secure way to carry your cap lights. Whether you’re navigating through a mine or working on a construction site, this lanyard ensures that your light source is always within reach. It’s an excellent solution for preventing loss or damage to your cap lights, making your workday more efficient and worry-free. Universal Compatibility Designed with versatility in mind, the Provix Lanyard is compatible with Wisdom Cap Light models 2, 3, and 4. This broad compatibility makes it an invaluable accessory for a wide range of professional lighting needs, ensuring that your cap light is always handy, no matter the model. Durable and Reliable Constructed from high-quality materials, the Provix Lanyard is built to endure the challenging conditions of mining, construction, and other demanding work environments. Its durability and reliability make it a trusted companion in any professional setting. Lightweight and Comfortable The Provix Lanyard is lightweight and comfortable to wear, ensuring that it doesn't add any unnecessary bulk or discomfort to your gear. Its user-friendly design makes it easy to attach and detach from your cap lights, offering convenience and ease of use. A Must-Have for Professionals The Provix Lanyard is more than just an accessory; it’s an essential tool for anyone who relies on helmet-mounted lighting. Ideal for mining, construction, outdoor adventures, and more, this lanyard is a practical addition to your professional equipment. Get Your Provix Lanyard Today Visit Provix to secure your Provix Lanyard and keep your cap lights safe and accessible. Enhance the functionality of your mining equipment with this simple yet effective tool. Check out our website at www.provix.net for more information and to explore our wide range of high-quality mining equipment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Bigbore 9-5/8 inch Surface Controlled Subsurface Safety Valve Wireline Retrievable

WR-SCSSSV Bigbore 9-5/8

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Coiled Tubing Surface Filter

SFF Surface Filter

Introducing the SFF Surface Filter from Marlin Oil Tools: The Ultimate Solution for Protecting Your Downhole Equipment Marlin Oil Tools is proud to offer the SFF Surface Filter, a highly efficient tool designed to safeguard your downhole equipment by filtering mechanical particles from the liquid flow. Engineered with precision, the SFF Surface Filter is an essential addition to any oil and gas operation, ensuring the longevity and reliability of your valuable downhole tools. Key Features of the SFF Surface Filter: Advanced Filtration Technology: Utilizes a wire wound welded to the frame, creating gaps smaller than the permissible size of particles, thereby capturing and retaining mechanical impurities as the liquid flows through. Customizable Filtration Levels: Offers versatile filtration options with membrane fineness primarily available in 0.25 mm, 0.5 mm, and 0.9 mm, allowing operators to select the appropriate level of filtration for their specific well conditions. Durable and Reliable Design: Crafted for durability and long-term use, the SFF Surface Filter stands up to the demanding conditions of oil and gas extraction environments. Protects Sensitive Downhole Tools: Especially beneficial for tools that are highly sensitive to mechanical impurities, such as downhole mud motors with Metal-to-Metal power sections and downhole gas separators. Easy Installation: Designed for straightforward installation in the pipeline running from the pump to the well, ensuring seamless integration into your existing workflow. Enhanced Operational Efficiency: By preventing mechanical particle contamination, the SFF Surface Filter contributes to the smooth operation and reduced maintenance needs of downhole equipment, ultimately saving time and costs. Elevate the protection and efficiency of your oil and gas operations with the SFF Surface Filter from Marlin Oil Tools, a premier downhole tool solution engineered to filter mechanical particles from liquid flows. Featuring advanced filtration technology and customizable filtration levels, the SFF Surface Filter is designed to meet the rigorous demands of the oil and gas industry, ensuring the protection and longevity of sensitive downhole equipment. Whether you're dealing with downhole mud motors, gas separators, or other critical tools, the SFF Surface Filter offers a reliable, durable, and easy-to-install solution to maintain clean liquid flows and enhance operational efficiency. Opt for the SFF Surface Filter and invest in the safety and productivity of your downhole operations. Why Choose the SFF Surface Filter from Marlin Oil Tools? Superior Protection: Provides unmatched filtration to protect downhole equipment from mechanical impurities. Operational Versatility: Adaptable to a wide range of oil and gas operations with customizable filtration to suit diverse needs. Long-lasting Durability: Built to withstand the harsh conditions of oil and gas extraction, ensuring reliability and longevity. Cost-Efficient Maintenance: Reduces the need for frequent downhole tool maintenance, saving both time and operational costs. The SFF Surface Filter by Marlin Oil Tools represents the forefront of filtration technology in the oil and gas industry, providing a vital solution for maintaining the integrity and efficiency of your downhole equipment. Choose the SFF Surface Filter for an enhanced level of protection and operational excellence in your well interventions.

Buy

Made to Order

Manufacturer

New

API

Land Freight


General Mechanical Slickline Service

InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently.

Service

In Stock

Service

New

API

Land Freight


Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch SP

SCSSSV - SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Double Roll-on Connector for Coiled Tubing

DRC Coiled Tubing Tool

DRC Coiled Tubing Connector | Double Roll-On Link | Marlin Oil Tools Description: Introducing the DRC (Double Roll-on Connector) from Marlin Oil Tools, the essential connecting link between two ends of splicing Coil Tubing (CT) in the oil and gas industry. Engineered for seamless integration and reliable performance, the DRC Connector features three grooves on each end, facilitating secure fixing (rolling) of the CT and ensuring optimal stability during operations. Key Features: Double Roll-On Design: The DRC Connector boasts a double roll-on design, with three grooves on each end for enhanced stability and secure attachment of splicing Coil Tubing. This innovative design minimizes the risk of movement or displacement, ensuring uninterrupted operations in challenging wellbore environments. Robust Sealing: Equipped with O-rings positioned between the grooves, the DRC Connector provides a reliable barrier against in-line working pressures. These O-rings effectively seal the connection, preventing leaks and enhancing operational safety and efficiency during Coil Tubing applications. Streamlined Installation: With its roll-on design and precision engineering, the DRC Connector simplifies the installation process, minimizing downtime and optimizing operational efficiency. The grooves allow for easy and secure attachment of splicing Coil Tubing, facilitating swift deployment in well intervention projects. Versatile Compatibility: Designed to accommodate a wide range of splicing Coil Tubing applications, the DRC Connector offers versatile compatibility with various sizes and configurations. Its robust construction and reliable sealing capabilities make it suitable for diverse operational requirements in the oil and gas industry. Engineered Reliability: Built to withstand the rigors of oil and gas operations, the DRC Coiled Tubing Connector delivers unmatched reliability and performance. Its durable construction, combined with advanced sealing technology, ensures consistent and dependable operation, minimizing downtime and maximizing productivity. Experience enhanced efficiency and reliability in Coil Tubing applications with the DRC Connector from Marlin Oil Tools. Trust in our expertise and commitment to quality engineering for your well intervention needs.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Casing Inspection

Safeguarding Well Integrity with InWaTec Combined’s Advanced E-Line Casing Inspection Services At InWaTec Combined, we understand that maintaining the structural integrity of well casings is paramount to the uninterrupted production and long-term viability of any well. That’s why we are committed to offering comprehensive E-Line Casing Inspection Services, employing an array of sophisticated diagnostic techniques to detect and prevent casing failures before they compromise well operations. Casing failures can arise from a variety of factors, including deformation, physical wear, and corrosion. These issues, if not identified and addressed promptly, can lead to diminished well production or catastrophic failures. Recognizing the critical nature of this aspect of well maintenance, InWaTec Combined utilizes four industry-standard techniques for casing inspection, each offering unique insights into the condition of the wellbore structure: Cased-Hole Calipers: Our E-Line delivered cased-hole calipers provide precise measurements of the internal dimensions of the casing, identifying areas of deformation and wear that may not be immediately apparent. Flux-Leakage Tools: These tools detect flaws in the casing by identifying areas where magnetic flux leakage occurs, indicative of potential corrosion or metal loss. Electromagnetic Phase-Shift Tools: By measuring variations in electromagnetic fields, these tools can pinpoint defects within the casing structure, offering an early warning against integrity breaches. Ultrasonic Tools: Our ultrasonic inspection tools use high-frequency sound waves to assess the thickness of casing walls, detecting thinning that could lead to potential collapse. In addition to these methods, InWaTec Combined also employs ultrasonic radial-cement-evaluation devices and modified openhole-imaging devices. These specialized tools are invaluable in evaluating the casing for signs of internal or external metal loss—a critical step in preventing unexpected downtime and ensuring the integrity of the well. Our E-Line Casing Inspection Services are about more than just diagnostics; they provide a strategic approach to well maintenance. By utilizing these advanced tools, we offer a detailed assessment of the casing's condition, enabling operators to take preemptive action to rectify issues before they escalate into more significant problems. In choosing InWaTec Combined for your casing inspection needs, you are selecting a partner dedicated to the highest standards of well integrity and operational safety. We provide a comprehensive, E-Line delivered, diagnostic service that ensures your well remains productive, safe, and profitable for years to come. Trust in the precision of our technology and the expertise of our team to maintain the backbone of your well operations—because at InWaTec Combined, we believe that prevention is the key to sustainable production.

Service

In Stock

Service

New

API

Land Freight


H Storm Choke 2 inch

Ambient Valve

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


OilHungry oil absorbent big pad

Oil absorbent big pad

OilHungry in Stoney Creek

Meer informatie

Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


AV Annulus Safety Valve 9-5/8 inch

Annulus Valve

The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature

Buy

Made to Order

Product

New

API

Sea Freight


Gauge Cutter

Downhole Tools

Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance

Buy

In Stock

Product & Service

New

API

Air Freight


Lock Mandrels for Landing Nipples

Downhole Tools

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


K Storm Choke 2 inch

Ambient valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


NIU - Pipe Inspection ROV

Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution Poseidon Robotics is thrilled to unveil the latest addition to our fleet of advanced subsea robotics: The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined At Poseidon Robotics, we understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Partner with Poseidon Robotics When you choose the NIU ROV from Poseidon Robotics, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact Poseidon Robotics today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission!

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Ramps Leasing

Enhance Accessibility and Efficiency with Ramp Leasing from CWB National Leasing Facilitating Smooth Operations with Cost-Effective and Flexible Solutions For businesses requiring enhanced accessibility and efficient movement of goods, vehicles, or equipment, ramps are an essential asset. Leasing ramps through Canadian Western Bank (CWB) National Leasing offers a smart, adaptable, and financially sound solution for businesses looking to improve their operational flow. Here’s how leasing ramps can benefit your business: 1. Quick Access to Essential Equipment CWB National Leasing values the importance of maintaining smooth operations in your business. They offer a swift leasing process, typically approving applications and arranging payment within 48 hours. This rapid service ensures that your ramps can be delivered and functional quickly, enhancing accessibility and efficiency in your operations without significant delay. 2. Increased Financial Flexibility Leasing ramps with CWB National Leasing boosts your financial agility. It allows you to leverage periodic payments over a substantial initial purchase, freeing up capital for other vital business needs. The option to add extra features or accessories to your ramps for a small payment increase enables customization to meet specific operational requirements. 3. Effective Cash Flow Management With manageable lease payments over the term, your ramps start contributing to your business’s operational efficiency while still being paid off. This approach helps maintain a healthy balance between expenses and revenue, crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing ramps can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position.

Service

In Stock

Service

New

ISO


Helmet Strap with 5x Strap Hooks

Helmet Strap

Provix in New Lowell

Meer informatie

Secure Your Lighting with the Wisdom Helmet Strap – Now at Provix Provix is proud to offer the Wisdom Helmet Strap with 5x Strap Hooks (model NWI-ZCZ073-SET5), an essential accessory for miners and construction workers. This helmet strap is specifically designed to provide a secure and reliable way to attach mining cap lamps to helmets, ensuring consistent illumination in challenging work environments. Designed for Convenience and Safety The Wisdom Helmet Strap is crafted with practicality in mind. It features five strap hooks that offer a firm grip, keeping your cap lamp securely attached to your helmet. This design not only ensures that your light source remains stable and positioned correctly but also enhances safety by preventing the lamp from becoming a distraction or hazard during work. Universal Compatibility Engineered for versatility, this helmet strap is compatible with a wide range of mining cap lamps. Whether you’re using a Wisdom lamp or another brand, the adjustable nature of the strap ensures a snug and secure fit, making it a universal solution for your lighting needs. Durable and Long-Lasting Constructed with high-quality materials, the Wisdom Helmet Strap is built to endure the rigors of mining and construction environments. Its durability ensures it can withstand daily wear and tear, providing reliable performance over time. Easy to Use and Adjust The helmet strap is designed for ease of use. The hooks can be easily attached to most safety helmets, and the adjustable strap allows for a comfortable fit, regardless of head size. This ease of use ensures that you can quickly set up your cap lamp and get to work without any hassle. Enhance Your Work Efficiency The Wisdom Helmet Strap is more than just an accessory; it’s a necessity for anyone who relies on helmet-mounted lighting. Its secure fit and durability make it an ideal choice for miners, construction workers, and other professionals who need reliable lighting solutions. Get Your Wisdom Helmet Strap Today Visit Provix to get your hands on the Wisdom Helmet Strap with 5x Strap Hooks. Enhance the functionality of your mining cap lamp and ensure a safe, illuminated work environment. Check out our website at www.provix.net for more information and to explore our wide range of mining equipment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


OCTG Tubular Goods Management

PipeDNA is a cloud-based pipe management solution

Streamlining OCTG Tubular Goods Management with PipeDNA: Boosting Efficiency and Reliability Efficient management of OCTG (Oil Country Tubular Goods) is critical in the oil and gas industry to ensure the success of drilling and production operations. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage their OCTG tubular goods, increase visibility, and optimize their operations for enhanced efficiency and reliability. Comprehensive Inventory Management and Tracking: PipeDNA offers a comprehensive inventory management and tracking system specifically tailored for OCTG tubular goods. Gain full visibility into your OCTG inventory, including utilization, activity, and trends. By monitoring the status and location of each OCTG pipe, stakeholders can proactively plan for upcoming drilling projects, streamline logistics, and optimize inventory levels. PipeDNA enables accurate tracking, reducing the risk of stockouts, minimizing downtime, and maximizing operational efficiency. Efficient Logistics Management: With PipeDNA, stakeholders can efficiently manage all aspects of logistics operations related to OCTG tubular goods. From shipments to status tracking and documentation, PipeDNA simplifies the entire process, ensuring seamless coordination across multiple locations and parties involved. Furthermore, the platform facilitates pipe bundling, enabling stakeholders to optimize transportation and storage, minimizing costs and improving overall efficiency. Streamlined Inspection Management: PipeDNA's inspection management feature provides a centralized platform to manage inspection jobs for OCTG tubular goods across multiple sites. With real-time tracking and status updates, stakeholders can monitor the progress of inspection jobs, ensuring timely completion and adherence to quality standards. Additionally, the platform enables the management of inspection profiles, allowing for efficient scheduling, tracking, and reporting of inspection activities. Automated Tally Operations: Pipe tallying is a crucial process in OCTG tubular goods management, and PipeDNA simplifies this operation with automated tally operations. Stakeholders can create and manage tally operations within the platform, streamlining the process and eliminating manual calculations. By automating pipe tally jobs and workflows, PipeDNA saves time, reduces errors, and ensures accurate and up-to-date tally results, enhancing overall operational efficiency. Enhanced Identification and Traceability: PipeDNA offers quick and accurate identification of OCTG tubular goods, providing stakeholders with essential pipe details, activity history, and traceability documentation. With seamless integration of popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables easy identification and tracking of each pipe, ensuring precise inventory control and reducing the risk of misplaced or misused OCTG tubular goods. This enhanced traceability minimizes downtime and improves resource allocation. Designed for the Oil and Gas Industry: PipeDNA was specifically designed for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in OCTG tubular goods management. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your OCTG operations and drive efficiency. Leveraging Emerging Technologies: At its core, PipeDNA harnesses the power of today's emerging technologies to optimize OCTG tubular goods management processes. The platform seamlessly integrates with popular barcode standards, such as UPC, EAN, and QR codes, enabling efficient barcoding and labeling. Moreover, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking. The platform also facilitates IoT data integration using the MQTT standard, enabling fast and reliable sensor data integration for enhanced decision-making. PipeDNA revolutionizes OCTG tubular goods management in the oil and gas industry, providing a smart cloud-based platform that enhances efficiency, reliability, and visibility. With its comprehensive inventory management, streamlined logistics operations, automated tallying, and robust identification and traceability features, PipeDNA empowers stakeholders to optimize their OCTG operations and make informed decisions based on real-time data. Leverage the power of PipeDNA and take your OCTG tubular goods management to new heights of efficiency and reliability.

Service

Currently in Use

Service

New

API

Air Freight


Partnered with Microsoft Business Voice

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Your Communications with ALCiT's Microsoft 365 Business Voice Partnership In the world of innovation, one name shines brighter than the rest: Microsoft. Since its inception in 1975, Microsoft has been synonymous with technological prowess, transforming the landscape of modern business. ALCiT proudly joins forces with Microsoft 365 Business Voice, introducing a cloud-based, integrated phone system that redefines how you communicate, collaborate, and connect. Microsoft: A Legacy of Innovation Microsoft's legacy is etched in innovation. For decades, they've sculpted the digital future, revolutionizing industries and empowering businesses. ALCiT is thrilled to be a part of this legacy, bringing you Microsoft 365 Business Voice – a solution that transcends communication barriers. Resource Unification, Powered by the Cloud Imagine a realm where your resources converge seamlessly. With Microsoft 365 Business Voice, you can bid adieu to scattered communication tools. This cloud-based, integrated phone system places your entire arsenal in one place, fostering collaboration and calling no matter where you work. Effortless Communication, Elevated Flexibility ALCiT's Microsoft 365 Business Voice empowers you in two pivotal ways: Customer Connection Amplified: Responding to customers becomes a breeze, with unmatched ease and flexibility. Answering the phone transforms from a task into a seamless interaction. Infinite Collaboration: Breaking boundaries within your team and business is no longer a challenge. Seamlessly communicate, collaborate, and create, regardless of physical barriers. Grow with Confidence Designed with small-to-medium businesses in mind, Microsoft 365 Business Voice is your compass to growth. ALCiT's partnership ensures that the system is not just a tool, but an engine of expansion, enabling businesses to rise to new heights. Shape the Future of Communication Today ALCiT's Microsoft 365 Business Voice partnership redefines communication. Experience the cloud-based revolution that connects you with your customers, your team, and your growth journey. Experience the power of ALCiT's partnership with Microsoft 365 Business Voice.

Service

Made to Order

Service

New

ISO


Test Tools

Downhole Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Test Tools In the highly specialized field of oil and gas exploration, precision, reliability, and efficiency are paramount. HOCA Oil Tools stands at the forefront of downhole technology, offering an extensive range of Test Tools designed to optimize and ensure the integrity of downhole operations. Our Test Tools are engineered to address the complex challenges encountered in modern well environments, enabling operators to conduct thorough evaluations and maintain control over their downhole conditions. HOCA's Test Tools: Precision Engineered for Optimal Downhole Performance HOCA Oil Tools' Test Tools are meticulously designed for testing tubing, locating leaks, setting hydraulic-set packers, and evaluating well integrity. These tools are crucial for maintaining well safety and efficiency, providing operators with accurate data to make informed decisions. Built from high-grade materials and adhering to strict industry standards, our Test Tools withstand the harsh downhole environment, delivering reliable performance and ensuring successful operations. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Test Tools means selecting a partner committed to your operational success. Our dedication to quality, innovation, and customer support ensures that our products not only meet but exceed the expectations of the demanding oil and gas industry. Integrating our Test Tools into your downhole operations signifies a step towards enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just equipment; you acquire a strategic advantage backed by our expertise and unwavering support. Opt for HOCA Oil Tools for your downhole testing needs and join the ranks of satisfied clients who trust our Test Tools to optimize their operations. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


5-1/2 inch Wireline Retrievable FXE SCSSV

WR-SCSSSV FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


BlueROV2 by Blue Robotics

BlueROV2

Unleash the Depths with Blue Robotics' BlueROV2 Poseidon Robotics is thrilled to introduce the BlueROV2, a versatile and high-performance Remotely Operated Vehicle (ROV) designed and built by the renowned experts at Blue Robotics Inc. Engineered to deliver exceptional value, the BlueROV2 is a testament to innovation, reliability, and affordability in the world of subsea exploration. Excellence in Stock and Ready to Ship! While we didn't design this exceptional ROV, our team at Poseidon Robotics is proud to assemble and stock the BlueROV2 for customers like you. We understand that time is of the essence in subsea operations, which is why we have BlueROV2 units ready to ship immediately. Need an ROV tomorrow? Count on Poseidon Robotics to have one dispatched today. Meticulous Assembly and Testing The BlueROV2 is more than just a remarkable product; it represents the culmination of expertise and craftsmanship. Each unit is carefully assembled by our skilled technicians, who take pride in their work to ensure every detail is perfect. Before shipping, each BlueROV2 undergoes rigorous testing, calibration, and a comprehensive factory acceptance test to meet the highest standards of quality and performance. Explore the Configuration The BlueROV2 comes with a powerful and agile 6 thruster frame, offering you unparalleled maneuverability in the water. Crafted from robust aluminum tubes, the frame is built to endure the demanding conditions of underwater environments. The Newton Gripper enhances your ROV's capabilities, allowing you to interact with the underwater world effortlessly. Illuminate your subsea adventures with 4 Lumen lights, providing excellent visibility even in the darkest waters. To ensure seamless operation, we've equipped the BlueROV2 with a specially modified tether quick disconnect for hassle-free connections. With 150m of tether on a reliable reel, you have the freedom to explore vast distances below the surface. Your Complete ROV Package Poseidon Robotics believes in providing you with everything you need to embark on your underwater missions immediately. When you choose the BlueROV2, you get more than just the ROV; you receive a comprehensive package to enhance your subsea experience: 1. BlueROV2 as Configured: Ready to dive and explore right out of the box. 2. Fathom Spool with 150m Tether: Experience the freedom to roam with a generous length of tether. 3. 1 Battery + Charger: Stay powered up and keep your ROV running smoothly. 4. Upgraded Tools and Spares Kit: We've included essential tools and spares to keep your ROV at peak performance. 5. Seahorse Wheeled Transport Cases: Secure and transport your BlueROV2 effortlessly with foam-padded cases. Specifications • Shipping Dimensions: o Case 1 (ROV): 29”x 23”x 16”, 55lbs o Case 2 (Reel/Tether): 29”x 23”x 16”, 53lbs o Case 3 (Batt/Spares/Tools): 24”x 16”x 10”, 25lbs Assurance of Quality At Poseidon Robotics, we stand behind our products. The BlueROV2 comes with a 90-day limited warranty, ensuring your peace of mind as you embark on your underwater adventures. Embrace Exploration with the BlueROV2 Are you ready to dive into the wonders of the deep? The BlueROV2 is your gateway to an awe-inspiring subsea world. With Poseidon Robotics' fast shipping, assembling and testing expertise, you can begin your underwater exploration journey without delay. Let the BlueROV2 be your trusted companion for your most ambitious subsea projects. Contact us today to dive deeper and discover the BlueROV2 difference!

Buy

In Stock

Distributor

New

ASME

Air Freight


MS-42 EB Multistage Steam Turbine

Back Pressure Turbine

Unleash Power and Precision with the Kessels MS-42 EB Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the high-stakes world of the oil and gas industry, precision and performance are non-negotiable. That's why, at Kessels Steam Turbines, we're proud to introduce our cutting-edge MS-42 EB Multistage Steam Turbine – a powerhouse engineered to redefine excellence in back-pressure turbine technology. Mastering Back-Pressure Turbines Back pressure turbines have been the workhorses of industrial steam applications for decades, and our MS-42 EB takes their capabilities to new heights. Whether it's single-stage or multi-stage options, these turbines serve as the critical bridge between the boiler unit and the process steam header, revolutionizing steam utilization and power generation. Efficiency Redefined Our MS-42 EB Multistage Steam Turbine boasts the hallmark of back pressure turbines: their straight-back pressure nature. This design ensures the efficient harnessing of exhaust steam, meeting process demands with unparalleled precision. Every ounce of electrical power generated is consumed as per the process steam demand, offering unmatched efficiency. Applications Beyond Boundaries At Kessels, we understand that diverse industries have unique demands. That's why our MS-42 EB Multistage Steam Turbine excels in a wide range of applications: Drive Applications: Embrace the power of our turbine in oil and gas operations, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and more. Wherever drive power is needed, Kessels delivers. Power Generation Applications: Elevate your sustainability game by using our turbine to generate electricity, powering generators with clean and efficient steam energy. Bleed Back-Pressure Steam Turbines Our commitment to versatility is evident in the design of the MS-42 EB. With built-in bleed points, uncontrolled extraction vents enable steam extraction within a medium pressure range. This feature proves invaluable in situations where bleeding steam is required at low volume steam demands and when there's a high tolerance for pressure variations. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines When your process steam demand volume is substantial, and you can't compromise on pressure variations, our steam turbines with controlled extraction vents come to the rescue. These turbines operate under intermediate pressure levels, ensuring a steady and reliable steam supply that your operations can depend on. Why Choose Kessels? Choosing Kessels Steam Turbines means choosing a legacy of excellence, innovation, and reliability. Our MS-42 EB Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization and minimize wastage with our precision-engineered turbine. Reliability Redefined: Rigorously tested and built with unwavering precision, the MS-42 EB ensures your operations run seamlessly. Unparalleled Versatility: Adapt to changing needs effortlessly, whether it's drive applications or eco-friendly power generation. Sustainability at Its Core: Harness the power of steam for electricity generation, reducing your carbon footprint and contributing to a greener future. Expert Support: Our team of specialists is always at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42 EB Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you towards a future of success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Class 8 trucks Leasing

Accelerate Your Business with Class 8 Truck Leasing from CWB National Leasing Transform Your Transportation and Logistics with Smart Leasing Solutions For businesses in sectors like construction, transportation, and logistics, Class 8 trucks are indispensable for efficient operation. Leasing these heavy-duty trucks through Canadian Western Bank (CWB) National Leasing offers a powerful and financially savvy solution. Here’s how leasing Class 8 trucks can drive your business towards greater efficiency and profitability: 1. Fast Equipment Acquisition CWB National Leasing prioritizes your business needs with a rapid leasing process. Decisions are typically made within 48 hours of application submission, ensuring that the payment process is initiated swiftly. This efficiency allows for the quick delivery of Class 8 trucks, minimizing downtime and keeping your operations running smoothly. 2. Boosted Purchasing Power Leasing Class 8 trucks with CWB National Leasing enhances your financial resources. It enables you to secure these essential vehicles through manageable periodic payments rather than a substantial upfront purchase, freeing up capital for other vital business needs. Plus, you have the option to add extra features or accessories to your trucks with a small increase in payments. 3. Optimized Cash Flow Smaller lease payments spread over the term mean that your Class 8 trucks start contributing to your business’s bottom line while they’re being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is key to financial health and business growth. 4. Flexible Payment Structures CWB National Leasing offers customizable payment plans, including seasonal, semi-annual, or annual options, to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with fluctuating or seasonal income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing Class 8 trucks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can positively impact your business’s tax situation. Conclusion Leasing Class 8 trucks through CWB National Leasing is a strategic decision that empowers your business with critical transportation and logistical capabilities while maintaining financial flexibility. It ensures access to state-of-the-art trucks, crucial for your operations, without the heavy financial burden of a large upfront investment. This leasing approach paves the way for enhanced operational efficiency, business expansion, and increased profitability.

Service

In Stock

Service

New

ISO


Silicone Protective Case

Miner's Cap Lamp Case

Provix in New Lowell

Meer informatie

Maximize Protection for Your Lighting Equipment with the Wisdom Silicone Protective Case from Provix Provix is excited to introduce the Wisdom Multi-color Silicone Protective Case (model NWI-ZCZ159), a durable and stylish accessory designed for Wisdom Cordless Lights. Available in a vibrant yellow, as well as other colors including black, green, orange, red, and white, this protective case is a perfect blend of functionality and aesthetics. Durable Silicone for Ultimate Protection Crafted from high-quality silicone, the Wisdom Protective Case offers superior protection for your cordless lights. The silicone material is robust and resilient, safeguarding your equipment against impacts, scratches, and daily wear and tear. This ensures your lighting equipment remains in top condition, ready for the demanding environments of mining and construction work. Vibrant Color Selection for Personalization Choose from a variety of colors to personalize your mining equipment. Whether you prefer the visibility of the bright yellow case or a more subdued tone like black or white, there's a color to match your style and preference. The colorful options also make it easier to identify your equipment among others, adding a layer of convenience to your workday. Designed for Wisdom Cordless Lights The Silicone Protective Case is specifically designed to fit Wisdom Cordless Lights, ensuring a snug and secure fit. This compatibility guarantees that the case provides optimal protection while maintaining the functionality and accessibility of your lights. Lightweight and Easy to Use Despite its sturdy construction, the protective case is lightweight and easy to install. Simply slip your Wisdom Cordless Light into the case for instant protection. The silicone material is flexible, allowing for easy application and removal, and does not add bulk to your equipment. Ideal for Mining and Construction Professionals Whether you're a miner, construction worker, or anyone who relies on portable lighting, the Wisdom Silicone Protective Case is an essential accessory. It not only protects your equipment but also adds a personal touch to your professional gear. Get Your Wisdom Silicone Protective Case Today Elevate the durability and style of your lighting equipment with the Wisdom Silicone Protective Case, available now at Provix. Visit our website at www.provix.net to choose from the array of colors and learn more about our range of high-quality mining equipment and accessories.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


MS-201 Multistage Steam Turbine

Back Pressure Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Premium All-Function Welding Helmet

Auto Tinting Welding Helmet

Introducing the Canaweld Premium All-Function Welding Helmet Series - Your Ultimate Welding Companion! When it comes to welding, safety is paramount. A high-quality welding helmet is not just a piece of equipment; it's a shield that protects welders from sparks, ultraviolet, and infrared light during the welding process. That's why we've created the Premium All-Function Welding Helmet Series - a state-of-the-art auto-tinting helmet that blends top-notch protection with hands-free ease of use. Experience True Protection - Auto-Tinting Technology: Our Premium All-Function Welding Helmet Series features auto-tinting technology that takes your safety to a whole new level. The photosensitive filter in the helmet automatically adjusts the viewing area to a pre-set shade before the light hits your eyes, offering instant protection. When your weld is complete, the viewing area "un-tints," allowing you to inspect your work without lifting the mask. This innovative design not only protects your eyes but also increases detection time, ensuring you weld with confidence. What Sets Us Apart - Top-Quality Features: When it comes to a high-quality welding helmet, we don't compromise. Here's what makes our Premium All-Function Welding Helmet Series stand out: 1. Lightning Fast Detection: With a detection time (tinting speed) of at least 1/20,000 of a second, your eyes are always shielded promptly. 2. Enhanced Protection: Equipped with four photo-sensitive sensors, our helmet guarantees maximum efficiency and exceptional protection. 3. Versatile Shade Settings: The helmet offers multiple shade settings, allowing you to use it for all welding processes in various light conditions. 4. Wide Viewing Area: The large viewing area ensures ease of use even in confined spaces, giving you an unobstructed view of your work. 5. Featherweight Design: We've crafted our helmet with a lightweight design to reduce neck fatigue during prolonged use, keeping you comfortable and focused. 6. Reliable Power: The solar cell, combined with two replaceable CR2032 lithium batteries, ensures your helmet never runs out of juice. Our Premium All-Function Welding Helmet Series goes above and beyond to deliver top-tier features: • Infinitely adjustable sensitivity control for personalized protection. • Constant UV/IR protection with Shade DIN16 at all times. • External dark to light delay adjustment from 0.1 to 1.0 seconds. • Low amperage TIG welding compatibility for added versatility. • Grinding function and low volume alarm for added convenience. • Superior optical clarity for crystal-clear vision during welding. • ADF self-check ensures the helmet's integrity before use. Built to Last - Certified Excellence: At Canaweld, we take quality seriously. Our Premium All-Function Welding Helmet Series complies with CAN/CSA Z94.3 – 07 (R2014) standards, ensuring you get a product that meets the highest safety and performance requirements. Elevate Your Welding Experience - Choose Canaweld's Premium All-Function Welding Helmet Series!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Partnered with Xerox

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Your Workflow with ALCiT's Xerox Partnership In the intricate world of document management and workflow optimization, one name stands as an icon of innovation: Xerox. A Fortune 500 company with over 8,500 active patents, Xerox represents the pinnacle of security and efficiency. ALCiT is excited to team up with Xerox to bring you robust and secure workflow solutions that reshape productivity as you know it. Xerox: Catalyst of Productivity A name synonymous with pioneering breakthroughs, Xerox holds a distinguished place in the realm of business and government. ALCiT's partnership with Xerox opens doors to an array of transformative solutions that not only boost productivity but also redefine how you work. Reimagining Your Workflow: Unveiled Simplified Internal Processes: Through automation tailored to your company's unique needs, internal processes become seamless. Efficiency skyrockets as mundane tasks give way to strategic thinking. Accessible and Searchable Content: Xerox empowers you to harness your content's full potential. From printing and scanning to archiving and backup, your content becomes not just accessible but also effortlessly searchable. Secure Document Workflow: With encryption and authentication at its core, Xerox ensures that your document workflow is not just efficient but also fortified against security breaches. Anytime, Anywhere Connectivity: Xerox extends your reach. From mobile options to secure document sharing, Xerox bridges geographical gaps and fuels collaboration. Experience Xerox's Power with ALCiT Productivity Amplification: Xerox's solutions aren't just tools; they're productivity catalysts. ALCiT's expertise ensures that these solutions align perfectly with your needs. Tailored Precision: Your needs are unique, and so are Xerox's solutions under ALCiT's guidance. Customization becomes the cornerstone of your improved workflow. Experience Transformation: Xerox doesn't just optimize workflows; it transforms how you experience work. Efficiency meets empowerment in a seamless blend. Redesign Your Workflow Today ALCiT's partnership with Xerox isn't just a collaboration; it's a transformational journey.

Service

Made to Order

Service

New

ISO


Lock Mandrels for Tubing

Downhole Tools

Unlocking Efficiency: HOCA Oil Tools' Lock Mandrels for Tubing In the demanding realm of oil and gas operations, ensuring the integrity and functionality of well components is paramount. HOCA Oil Tools, a pioneer in downhole slick line tools, introduces its cutting-edge Lock Mandrels for Tubing – an essential solution designed to enhance the performance and reliability of downhole activities. These tools are engineered for precision, delivering unmatched reliability and performance to meet the rigorous demands of modern well operations. HOCA's Lock Mandrels for Tubing: Precision-Engineered for Superior Performance Our Lock Mandrels for Tubing are designed to securely latch into the tubing string, providing a stable base for various downhole tools and devices. Tailored to accommodate different tubing sizes and pressures, they are essential for the effective management and control of wellbore fluids. Fabricated from high-quality materials and built to withstand the harshest downhole environments, HOCA's Lock Mandrels ensure operational success and longevity. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Lock Mandrels for Tubing means choosing a partner committed to your operational success. Our dedication to quality and innovation ensures that our products not only meet but exceed the expectations set by the demanding oil and gas industry. Incorporating our Lock Mandrels into your tubing operations signifies a step towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just equipment; you gain a strategic advantage supported by our expertise and unwavering commitment to excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who rely on our Lock Mandrels for Tubing to secure their operational success. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole activities. With HOCA Oil Tools, empower your downhole operations with tools that redefine reliability, efficiency, and performance in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Partnered with vmware

Cybersecurity

ALCiT in Mississauga

Meer informatie

Unlock the Future of Datacenter Virtualization with ALCiT's VMware Partnership In the realm of technological innovation, few names shine as brilliantly as VMware. As part of the Dell EMC family and the driving force behind transformative tech advancements, VMware stands as a beacon of excellence in the IT landscape. ALCiT is thrilled to be more than just a partner – we're your gateway to a future defined by datacenter virtualization. VMware: The Powerhouse Behind Industries With an ecosystem of over 30,000 partners, VMware's influence has been nothing short of revolutionary. Through tech innovations that have changed the very fabric of industries, VMware has redefined what's possible in the digital realm. ALCiT's partnership with VMware is your ticket to harnessing this unparalleled potential. Virtualization: The Heartbeat of Efficiency Efficiency Redefined: No datacenter achieves its true potential without the magic of virtualization. At its core, VMware's platform embodies efficiency, enabling you to manage your resources with unmatched ease. Mastery of the Platform: At ALCiT, VMware isn't just a tool; it's our canvas. We know VMware like the back of our hand – from selling and configuring to maintaining and maximizing its capabilities. Seamless Integration: Virtualization isn't just about technology; it's about integration. ALCiT ensures that VMware seamlessly integrates into your ecosystem, propelling you toward unparalleled efficiency. Unleash the Power of VMware with ALCiT Consultation: Dive deep into the world of VMware with ALCiT's expert guidance. Together, we'll map out a virtualization strategy that empowers your digital journey. Configuration and Implementation: From conceptualization to reality, ALCiT configures and deploys VMware to align perfectly with your needs. Ongoing Support: Virtualization isn't just a one-time event; it's an ongoing journey. ALCiT's unwavering support ensures that your VMware experience remains flawless. Embrace the Future Today ALCiT's partnership with VMware isn't just a collaboration; it's your path to datacenter transformation.

Service

Made to Order

Service

New

ISO


Multiprocess 301-SL Welder

Welding Machine

Discover the Powerhouse Welding Solution: Multiprocess 301-SL by Canaweld Are you in search of an industrial-grade welding machine that brings power, intelligence, and versatility to your oil and gas operations? Look no further than the Multiprocess 301-SL by Canaweld. This heavy-duty, synergetic, and intelligent welding machine is packed with advanced features, making it the ultimate choice for professional welders in the industry. Unleash Welding Excellence The Multiprocess 301-SL is an inverter-based arc welding power source optimized for MIG, Flux-Cored, Gasless Wires, TIG lift, and Stick welding, both in manual and synergic mode. Experience exceptional welding performance and a wide range of professional functions that meet the demands of industrial workshops. Its portability and ease of transport make it a reliable companion on any job site. Master Your Craft with Ease Equipped with a 5-inch color LCD display and various automatic controls, the Multiprocess 301-SL ensures quick and easy setup and operation. Both experienced welders and novices can operate the device effortlessly, reducing parameter setting time and increasing actual welding time. Synergic control provides pre-set weld parameters, improving usability and enabling operators of all skill levels to achieve precise results. Versatility at Your Fingertips No matter your welding requirements, the Multiprocess 301-SL has you covered. With the ability to perform MIG, Flux Cored, Gasless Wires, TIG lift, and Stick Welding, this machine adapts to various applications with ease. It is designed and tested to withstand the toughest conditions, ensuring reliability even in extreme heat of 104°F/40°C. Empowering Welding Precision The Multiprocess 301-SL boasts digital control of welding parameters based on the material or gas type and wire diameter, allowing for precise and efficient welding. Its manual polarity changeover feature supports the most common gas and gasless wires, Stick electrodes, and Lift TIG processes, providing flexibility in your welding tasks. Superior Wire Feeding Mechanism Canaweld's commitment to quality extends to the machine's wire feeding mechanism. The Multiprocess 301-SL features a professional and heavy-duty wire feeding system with 37mm rolls, a sealed, powerful, and durable wire feeder motor, and replaceable double groove rolls requiring no tools for replacements. Unmatched Customization Tailor your welding experience with adjustable voltage, wire speed, wave form, and burn back in the MIG process. In the TIG process, enjoy adjustable amperage, final slope, and post flow, while the Stick welding process allows for adjustable amperage, arc force, and material thickness selection. Designed for Convenience Canaweld understands the importance of easy access and movement during welding tasks. The Multiprocess 301-SL is equipped with flip doors and a specific mechanism to assist movement, allowing you to hold the doors in place at an angle for maximum ease of access. Additionally, the machine comes with lockable swivel casters for enhanced mobility. Reliable, Durable, and Worry-Free With Canaweld's comprehensive 3-year warranty, you can weld with confidence, knowing that your investment is protected. The Multiprocess 301-SL also includes two built-in eyebolts for lifting, making transportation and storage hassle-free. Join the Ranks of Industry Professionals Experience the power, precision, and versatility of the Multiprocess 301-SL by Canaweld. This welding powerhouse will elevate your oil and gas projects to new levels of efficiency and excellence. From novices to seasoned professionals, the Multiprocess 301-SL is the ultimate choice for welders who demand the best. Unlock your welding potential today with Canaweld. Invest in the future of welding technology and experience the unmatched performance of the Multiprocess 301-SL.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Point of sale systems Leasing

Supercharge Your Business with Leased Point of Sale Systems from CWB National Leasing Are you ready to take your business to the next level, boost efficiency, and drive profits higher? Look no further than CWB National Leasing for all your Point of Sale (POS) system leasing needs. Here's why you should choose us: Get Your Equipment Fast In today's fast-paced business world, access to cutting-edge technology is crucial for staying ahead of the competition. At CWB National Leasing, we understand the urgency of obtaining your POS system quickly. When you apply for a POS system lease with us, you can expect lightning-fast decision-making. Just how fast are we? Typically, within a mere 48 hours of your approval, we notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your top-of-the-line POS system is delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By opting for leasing, you can unlock vital cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your POS system with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is crucial for the success of any business. When you lease a POS system with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your POS system, it will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we recognize that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your POS system lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing POS systems through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing POS systems with confidence. In conclusion, leasing POS systems with CWB National Leasing is the strategic choice for business owners determined to elevate their operations, enhance productivity, and maximize profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your POS system leasing needs today!

Service

In Stock

Service

New

ISO


Wash Nozzle for Coiled Tubing

WNZ Wash Nozzle

Introducing the WNZ Wash Nozzle from Marlin Oil Tools: The Ultimate Solution for Efficient Well Cleanout Operations Marlin Oil Tools proudly presents the WNZ Wash Nozzle, a specialized downhole tool engineered for superior well intervention and cleanout operations. As an integral component of the Bottom Hole Assembly (BHA), the WNZ Wash Nozzle is designed to enhance the efficiency of well cleanouts by utilizing high-speed jets to break up and remove dense deposits from the wellbore. Key Features of the WNZ Wash Nozzle: High-Speed Jet Technology: The WNZ Wash Nozzle features nozzles that restrict cleanout fluid passage, thereby increasing the speed of the jet for effective deposit removal. Customizable Flushing Options: Offers the flexibility to customize the number, direction, and inner diameter of flushing holes to meet specific operational needs, ensuring targeted cleanout. Seamless BHA Integration: Designed to run as part of the BHA, the WNZ Wash Nozzle seamlessly integrates into well intervention workflows. Efficient Deposit Breakup: The high-speed jet mechanism is specifically engineered to break up dense deposits, making cleanout operations more efficient. Rapid Customization Capability: Marlin Oil Tools responds quickly to client requests for customized tool designs, ensuring minimal downtime and optimal tool performance. Versatile Application: Suitable for a wide range of well intervention cleanout tasks, the WNZ Wash Nozzle enhances operational flexibility and effectiveness. Elevate your well intervention and cleanout strategies with the WNZ Wash Nozzle from Marlin Oil Tools, a cutting-edge solution designed to optimize wellbore cleaning in the oil and gas industry. Leveraging high-speed jet technology, the WNZ Wash Nozzle efficiently breaks up and removes dense deposits, ensuring a clean wellbore conducive to optimal production and operational safety. With customizable flushing options and seamless BHA integration, the WNZ Wash Nozzle offers unparalleled flexibility and efficiency in well cleanout operations. Opt for Marlin Oil Tools’ WNZ Wash Nozzle for targeted, efficient, and customizable wellbore cleaning solutions. Why Choose the WNZ Wash Nozzle from Marlin Oil Tools? Targeted Cleaning Efficiency: Achieves superior cleanout performance with customizable high-speed jets. Customization to Suit Needs: Tailored flushing options provide precise control over cleanout operations. Enhanced Operational Flexibility: Adapts to various well conditions and cleanout requirements, improving operational outcomes. Quick Turnaround on Custom Designs: Marlin Oil Tools’ rapid customization process ensures tools are optimized for your specific operational needs. The WNZ Wash Nozzle by Marlin Oil Tools represents the forefront of downhole cleanout technology, providing operators with a powerful tool for maintaining well integrity and enhancing productivity. Incorporate the WNZ Wash Nozzle into your well intervention toolkit for cleaner, more efficient, and customized wellbore cleaning operations.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Fiber Optic Mechanical Connectors

Navigating Optimal Connectivity with Nulux’s Fiber Optic Mechanical Connectors The Oil and Gas industry is no stranger to the integral role that secure, precise, and reliable connectivity plays in ensuring the smooth execution of its multifaceted operations. Amidst the sprawling expanse of pipes, rigs, and refineries lies a nexus of data, flowing incessantly, safeguarding operational integrity, and facilitating momentous decisions. In the paradigm of fostering such impeccable connectivity, Nulux Network Solutions introduces its exemplary service of deploying Fiber Optic Mechanical Connectors. Connecting More Than Just Fibers A fiber optic connector, though small in stature, plays a monumental role in ensuring that the lifeblood of your operations – your data – traverses through the network with utmost precision and minimal loss. Positioned meticulously at the end of a line, a fiber optic connector becomes the gateway through which connectivity to network devices or other fiber connectors in a patch panel is realized. Mechanical fiber connectors stand as sentinels, guarding the alignment of the cores of fibers, ensuring that the passage of light – and thus your data – is uninterrupted and lossless. The efficacy of these connectors is such that, when adeptly installed, they concede incredibly minimal light due to reflection or misalignment of the fibers. A Panorama of Possibilities with Mechanical Connectors Navigating through the approximately 100 different types of fiber optic connectors that have graced the market, Nulux remains undeterred and proficient in ensuring the selection and installation of the most apt connectors to meet your specific operational needs. Why Nulux’s Fiber Optic Mechanical Connectors? Spectrum-Wide Expertise: Offering products, solutions, and services that span across the entire energy value chain, Nulux’s offerings are not merely solutions but a steadfast commitment to ensuring your operations are perpetually connected and sustainable. Tailored Connectivity Solutions: Every operation in the oil and gas sector is uniquely nuanced. Nulux prides itself on delivering custom, tailored solutions, ensuring that your fiber optic connectors are not just installed but are perfectly aligned with your operational needs. Navigating Towards Sustainability: Our engagement with our customers extends beyond providing solutions. We stand alongside you, steering towards a more sustainable future, ensuring that every connector, every fiber, and every byte of data propels us towards a future that’s not just connected but also environmentally conscious. Lighting the Pathway of Data: Mechanical connectors from Nulux assure that the luminal path your data treads is secure, reliable, and optimal, ensuring that every bit of information reaches its destination as intended. Your Data’s Journey, Secured with Nulux In the nexus of your operations, where data flows with the same criticality as the oil traversing through your pipelines, Nulux Network Solutions stands as a guardian, ensuring that every byte of data reaches its destination securely, reliably, and optimally. Explore with Nulux, the realms of impeccable connectivity, safeguarding your operations with our Fiber Optic Mechanical Connectors, and let’s forge ahead, crafting a future where every connection propels us towards sustainability and operational excellence. Empower your network, ensure your connectivity, and enlighten your future with Nulux.

Service

In Stock

Service

New

ISO


Bridge Plug Setting

Seamless Zone Isolation: InWaTec Combined’s E-line Bridge Plug Setting Services In the complex operations of oil and gas extraction, the ability to isolate zones within the wellbore is critical for effective production management and intervention. InWaTec Combined offers specialized E-line Bridge Plug Setting Services, utilizing state-of-the-art tools to achieve precise zonal isolation with both permanent and retrievable bridge plug options. Bridge plugs are essential elements in completion hardware, designed to provide robust seals both above and below the production tubing within the casing, liner, or wellbore wall. Their primary function is to isolate certain sections of the well, which is especially beneficial in wells with multiple producing zones or when specific zones need to be temporarily sealed off during interventions. Permanent Bridge Plugs: These are typically favored for their cost-effectiveness and superior sealing and gripping capabilities. Once set, they provide a dependable barrier, with metal slips or "slips" that anchor into the casing's inner diameter using sharpened, carburized teeth. The seal is completed with large cylindrical rubber elements, and in high-pressure environments, metal rings enhance the seal by preventing rubber extrusion. Retrievable Bridge Plugs: These plugs are the go-to solution when flexibility is required, such as during secondary recovery operations, well re-completions, or when there's a need to change out production tubing. Though they may have lower sealing and gripping capabilities compared to permanent options, their design allows for removal and reuse, providing significant operational versatility. Our E-line Bridge Plug Setting Services deploy these tools with precision. The plug is conveyed into the well via wireline—a method that provides real-time depth control and selectivity. Once at the target depth, an axial load is applied to the bridge plug to initiate the expansion of the slips and rubber elements, creating a secure seal against the casing. The setting mechanism can be activated hydraulically, mechanically, or with a controlled chemical charge, depending on the well conditions and client requirements. InWaTec Combined’s expertise ensures that the most appropriate setting method is chosen for each operation, considering the well's pressure environment, the desired duration of the plug setting, and the future plans for the well. By opting for InWaTec Combined’s E-line Bridge Plug Setting Services, operators benefit from a service that combines reliability with adaptability. Our commitment to leveraging advanced technologies with expert execution means that your well operations can proceed with confidence, knowing that each zone is isolated with the utmost precision. InWaTec Combined is dedicated to providing solutions that enhance operational efficiency and well integrity. Whether you require a permanent solution for long-term isolation or the flexibility of a retrievable plug for short-term interventions, our E-line Bridge Plug Setting Services are designed to meet your needs with precision, reliability, and cost-effectiveness.

Service

In Stock

Service

New

API

Land Freight


Sand Pump Bailer

Downhole Tools

Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions.

Buy

In Stock

Product & Service

New

API

Air Freight


Fixed Blade Stabilizer for Coiled Tubing

FBS Coiled Tubing Tool

Introducing the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools: The Optimal Solution for Coiled Tubing Stability in Oil and Gas Well Interventions Marlin Oil Tools proudly presents the FBS (Fixed Blade Stabilizer), a cutting-edge downhole tool meticulously designed to enhance the stability and efficiency of well intervention operations. As part of the borehole assembly (BHA), the FBS plays a crucial role in centering the BHA relative to the well's axis, ensuring optimal performance during critical interventions, especially in wells with significant inclination or when coiled tubing (CT) exhibits residual bending. Here’s why the FBS is an indispensable tool for your operations. Key Features of the FBS (Fixed Blade Stabilizer): Precision Centering: Engineered to center the BHA within the well, the FBS ensures that tools like mills or perforators operate effectively at the heart of the wellbore, crucial for tasks requiring precise positioning such as milling or perforation. Versatile Application: Ideal for use in wells with various inclinations, up to 90 degrees, where the BHA tends to lie against the well wall, the FBS provides the necessary support to maintain the BHA in the optimal position. Enhanced Stability: By preventing the eccentric location of the CT BHA within the well, the FBS significantly reduces the risk of operational issues, ensuring smoother, more efficient well interventions. Robust Design: The fixed blades of the FBS are designed to withstand the harsh downhole conditions, offering durability and reliability throughout the operation. Elevate your well intervention strategies with the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum BHA stability and efficiency in oil and gas operations. The FBS excels in centering the BHA relative to the well's axis, ensuring accurate positioning for milling, perforation, and other precision-dependent tasks. With its ability to accommodate wells of up to 90 degrees inclination and correct CT BHA eccentricity, the FBS is your solution for enhancing operational effectiveness and reducing risks in challenging well conditions. Choose the FBS for unparalleled support and stability in your coiled tubing operations. Why Choose the FBS from Marlin Oil Tools? Optimized Well Intervention: Improves the accuracy and efficiency of milling and perforation tasks by centering the BHA. Adaptable to Various Well Inclinations: Provides consistent performance in wells with up to 90 degrees of inclination. Reliable Stability: Reduces operational complications by preventing the CT BHA from lying eccentrically in the well. Durable Construction: Built to endure the rigors of downhole environments, ensuring longevity and reliability. The FBS (Fixed Blade Stabilizer) by Marlin Oil Tools represents the forefront of downhole stabilization technology, ensuring that your well intervention operations are performed with the highest level of precision and efficiency. Incorporate the FBS into your coiled tubing operations to achieve optimal outcomes in well stability and intervention success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Woodworking equipment Leasing

Elevate Your Craft with Woodworking Equipment Leasing from CWB National Leasing Transforming Your Woodworking Projects with Flexible and Efficient Equipment Solutions For businesses in the woodworking industry, from small workshops to large manufacturing plants, having access to high-quality woodworking equipment is crucial for productivity and craftsmanship. Leasing woodworking equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your woodworking capabilities. Here’s how leasing woodworking equipment can benefit your business: 1. Swift Access to Advanced Equipment CWB National Leasing prioritizes your need for efficient operations. They offer a rapid leasing process, typically approving applications and notifying your equipment dealer about payment within 48 hours. This quick turnaround ensures that your woodworking equipment can be delivered and operational swiftly, minimizing any disruption to your projects. 2. Enhanced Financial Power Leasing woodworking equipment with CWB National Leasing increases your buying power. It allows you to spread costs over periodic payments rather than making a large upfront investment, freeing up capital for other areas of your business. Additionally, the option to add extra features or accessories to your equipment for a small payment increase allows for customization to meet your specific production needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your woodworking equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, which is essential for the financial health and growth of your business. 4. Flexible Payment Structures CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and aligned with your financial situation. 5. Potential Tax Benefits Leasing woodworking equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease woodworking equipment through CWB National Leasing is a strategic decision that equips your business with essential tools while maintaining financial flexibility. It ensures access to state-of-the-art equipment, vital for producing high-quality wood products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your woodworking business to thrive in a competitive market.

Service

In Stock

Service

New

ISO